pm24.git, branch v6.13-rc1

Linux 6.13-rc1

2024-12-01T22:28:56Z

Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2024-12-01T21:38:24Z

Pull i2c component probing support from Wolfram Sang: "Add OF component probing. Some devices are designed and manufactured with some components having multiple drop-in replacement options. These components are often connected to the mainboard via ribbon cables, having the same signals and pin assignments across all options. These may include the display panel and touchscreen on laptops and tablets, and the trackpad on laptops. Sometimes which component option is used in a particular device can be detected by some firmware provided identifier, other times that information is not available, and the kernel has to try to probe each device. Instead of a delicate dance between drivers and device tree quirks, this change introduces a simple I2C component probe function. For a given class of devices on the same I2C bus, it will go through all of them, doing a simple I2C read transfer and see which one of them responds. It will then enable the device that responds" * tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: fix typo in I2C OF COMPONENT PROBER of: base: Document prefix argument for of_get_next_child_with_prefix() i2c: Fix whitespace style issue arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail platform/chrome: Introduce device tree hardware prober i2c: of-prober: Add GPIO support to simple helpers i2c: of-prober: Add simple helpers for regulator support i2c: Introduce OF component probe function of: base: Add for_each_child_of_node_with_prefix() of: dynamic: Add of_changeset_update_prop_string

Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

2024-12-01T21:10:51Z

Pull bprintf() removal from Steven Rostedt: - Remove unused bprintf() function, that was added with the rest of the "bin-printf" functions. These are functions that are used by trace_printk() that allows to quickly save the format and arguments into the ring buffer without the expensive processing of converting numbers to ASCII. Then on output, at a much later time, the ring buffer is read and the string processing occurs then. The bprintf() was added for consistency but was never used. It can be safely removed. * tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: printf: Remove unused 'bprintf'

Merge tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-12-01T20:41:21Z

Pull timer fixes from Borislav Petkov: - Fix a case where posix timers with a thread-group-wide target would miss signals if some of the group's threads are exiting - Fix a hang caused by ndelay() calling the wrong delay function __udelay() - Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO (microsecond resolution) and a negative offset * tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-timers: Target group sigqueue to current task only if not exiting delay: Fix ndelay() spuriously treated as udelay() ntp: Remove invalid cast in time offset math

Merge tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-12-01T20:37:58Z

Pull irq fixes from Borislav Petkov: - Move the ->select callback to the correct ops structure in irq-mvebu-sei to fix some Marvell Armada platforms - Add a workaround for Hisilicon ITS erratum 162100801 which can cause some virtual interrupts to get lost - More platform_driver::remove() conversion * tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Switch back to struct platform_driver::remove() irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801 irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain

Merge tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-12-01T20:35:37Z

Pull x86 fixes from Borislav Petkov: - Add a terminating zero end-element to the array describing AMD CPUs affected by erratum 1386 so that the matching loop actually terminates instead of going off into the weeds - Update the boot protocol documentation to mention the fact that the preferred address to load the kernel to is considered in the relocatable kernel case too - Flush the memory buffer containing the microcode patch after applying microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns - Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN has been disabled * tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Terminate the erratum_1386_microcode array x86/Documentation: Update algo in init_size description of boot protocol x86/microcode/AMD: Flush patch buffer mapping after application x86/mm: Carve out INVLPG inline asm for use by others x86/cpu: Fix PPIN initialization

strscpy: write destination buffer only once

2024-12-01T20:17:16Z

The point behind strscpy() was to once and for all avoid all the problems with 'strncpy()' and later broken "fixed" versions like strlcpy() that just made things worse. So strscpy not only guarantees NUL-termination (unlike strncpy), it also doesn't do unnecessary padding at the destination. But at the same time also avoids byte-at-a-time reads and writes by _allowing_ some extra NUL writes - within the size, of course - so that the whole copy can be done with word operations. It is also stable in the face of a mutable source string: it explicitly does not read the source buffer multiple times (so an implementation using "strnlen()+memcpy()" would be wrong), and does not read the source buffer past the size (like the mis-design that is strlcpy does). Finally, the return value is designed to be simple and unambiguous: if the string cannot be copied fully, it returns an actual negative error, making error handling clearer and simpler (and the caller already knows the size of the buffer). Otherwise it returns the string length of the result. However, there was one final stability issue that can be important to callers: the stability of the destination buffer. In particular, the same way we shouldn't read the source buffer more than once, we should avoid doing multiple writes to the destination buffer: first writing a potentially non-terminated string, and then terminating it with NUL at the end does not result in a stable result buffer. Yes, it gives the right result in the end, but if the rule for the destination buffer was that it is _always_ NUL-terminated even when accessed concurrently with updates, the final byte of the buffer needs to always _stay_ as a NUL byte. [ Note that "final byte is NUL" here is literally about the final byte in the destination array, not the terminating NUL at the end of the string itself. There is no attempt to try to make concurrent reads and writes give any kind of consistent string length or contents, but we do want to guarantee that there is always at least that final terminating NUL character at the end of the destination array if it existed before ] This is relevant in the kernel for the tsk->comm[] array, for example. Even without locking (for either readers or writers), we want to know that while the buffer contents may be garbled, it is always a valid C string and always has a NUL character at 'comm[TASK_COMM_LEN-1]' (and never has any "out of thin air" data). So avoid any "copy possibly non-terminated string, and terminate later" behavior, and write the destination buffer only once. Signed-off-by: Linus Torvalds

printf: Remove unused 'bprintf'

2024-12-01T03:41:35Z

bprintf() is unused. Remove it. It was added in the commit 4370aa4aa753 ("vsprintf: add binary printf") but as far as I can see was never used, unlike the other two functions in that patch. Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org Reviewed-by: Andy Shevchenko Acked-by: Petr Mladek Signed-off-by: Dr. David Alan Gilbert Signed-off-by: Steven Rostedt (Google)

Merge tag 'turbostat-2024.11.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux

2024-12-01T02:30:22Z

Pull turbostat updates from Len Brown: - assorted minor bug fixes - assorted platform specific tweaks - initial RAPL PSYS (SysWatt) support * tag 'turbostat-2024.11.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: 2024.11.30 tools/power turbostat: Add RAPL psys as a built-in counter tools/power turbostat: Fix child's argument forwarding tools/power turbostat: Force --no-perf in --dump mode tools/power turbostat: Add support for /sys/class/drm/card1 tools/power turbostat: Cache graphics sysfs file descriptors during probe tools/power turbostat: Consolidate graphics sysfs access tools/power turbostat: Remove unnecessary fflush() call tools/power turbostat: Enhance platform divergence description tools/power turbostat: Add initial support for GraniteRapids-D tools/power turbostat: Remove PC3 support on Lunarlake tools/power turbostat: Rename arl_features to lnl_features tools/power turbostat: Add back PC8 support on Arrowlake tools/power turbostat: Remove PC7/PC9 support on MTL tools/power turbostat: Honor --show CPU, even when even when num_cpus=1 tools/power turbostat: Fix trailing '\n' parsing tools/power turbostat: Allow using cpu device in perf counters on hybrid platforms tools/power turbostat: Fix column printing for PMT xtal_time counters tools/power turbostat: fix GCC9 build regression

Merge tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-12-01T02:23:05Z

Pull PCI fix from Bjorn Helgaas: - When removing a PCI device, only look up and remove a platform device if there is an associated device node for which there could be a platform device, to fix a merge window regression (Brian Norris) * tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI/pwrctrl: Unregister platform device only if one actually exists