pm24.git/Documentation/devicetree/bindings/iio/gyroscope, branch master

dt-bindings: iio: gyroscope: bosch,bmg160: add spi-max-frequency

2024-02-28T19:26:38Z

Make use of the common spi-peripheral-props.yaml to pull in the common spi device properties and limit the spi-max-frequency to 10 MHz as this is the max. frequency if VDDIO >= 1.62V. Note all listed devices can either operate in I2C or in SPI mode. Signed-off-by: Marco Felsch Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240221174305.3423039-1-m.felsch@pengutronix.de Signed-off-by: Jonathan Cameron

dt-bindings: iio: cleanup examples - indentation

2023-01-28T16:13:24Z

Use 4-space indentation (for cases when it is neither 4 not 2 space). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Alexandru Lazar # max1241 Acked-by: Rob Herring Link: https://lore.kernel.org/r/20230124081037.31013-5-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron

dt-bindings: iio: correct node names in examples

2023-01-28T16:13:24Z

Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in examples. Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Link: https://lore.kernel.org/r/20230124081037.31013-3-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron

dt-bindings: iio: gyroscope: use spi-peripheral-props.yaml

2022-11-23T19:43:59Z

For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Link: https://lore.kernel.org/r/20221004115642.63749-4-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron

dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins

2022-08-21T17:24:16Z

BMG160 has two interrupt pins to which interrupts can be freely mapped. Correct the schema to express such case and fix warnings like: qcom/msm8916-alcatel-idol347.dtb: gyroscope@68: interrupts: [[97, 1], [98, 1]] is too long However the basic issue still persists - the interrupts should come in a defined order. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220805075503.16983-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron

dt-bindings: Use correct vendor prefix for Asahi Kasei Corp.

2021-12-06T20:21:40Z

The old "ak" vendor prefix that was never officially accepted was still being used in some examples. Convert to the correct vendor prefix (i.e. "asahi-kasei"). Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/20211206144802.217073-1-thierry.reding@gmail.com Signed-off-by: Rob Herring

dt-bindings: Clean-up undocumented compatible strings

2021-03-23T21:27:51Z

Adding checks for undocumented compatible strings reveals a bunch of warnings in the DT binding examples. Fix the cases which are typos, just a mismatch between the schema and the example, or aren't documented at all. In a couple of cases, fixing the compatible revealed some schema errors which are fixed. There's a bunch of others remaining after this which have bindings, but those aren't converted to schema yet. Cc: Thierry Reding Cc: Sam Ravnborg Cc: Pavel Machek Cc: linux-clk@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-i3c@lists.infradead.org Cc: linux-iio@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring Acked-by: Mark Brown Acked-by: Stephen Boyd Acked-by: Greg Kroah-Hartman Acked-by: Kishon Vijay Abraham I Acked-by: Sebastian Reichel Acked-by: Maxime Ripard Acked-by: Vinod Koul Acked-by: Alexandre Belloni Acked-by: Alain Volmat Acked-by: Jonathan Cameron Link: https://lore.kernel.org/r/20210316194918.3528417-1-robh@kernel.org

dt-bindings: iio: gyroscope: bmg160: Document regulator supplies

2021-01-22T08:52:01Z

BMG160 needs VDD and VDDIO regulators that might need to be explicitly enabled. Document support for vdd/vddio-supply to implement this. Signed-off-by: Stephan Gerhold Reviewed-by: Linus Walleij Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201211183815.51269-1-stephan@gerhold.net Signed-off-by: Jonathan Cameron

dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.

2021-01-09T14:25:29Z

Very similar to the mpu6050 binding. Only unusual element is the i2c-gate section. Example tweaked a little to include a real device behind the gate. As Rob Herring suggested, dropped use of explicit i2c-gate yaml binding in favour of just using the i2c-controller.yaml binding directly. Signed-off-by: Jonathan Cameron Reviewed-by: Linus Walleij Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201128173343.390165-4-jic23@kernel.org

dt-bindings:iio:gyro:bosch,bmg180: txt to yaml format conversion.

2020-11-25T14:36:09Z

Very simple direct conversion of existing txt file. Signed-off-by: Jonathan Cameron Reviewed-by: Rob Herring Cc: H. Nikolaus Schaller Link: https://lore.kernel.org/r/20201031184854.745828-44-jic23@kernel.org