pm24.git/Documentation/devicetree/bindings/iio, branch master

Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-11-29T19:58:27Z

Pull char/misc/IIO/whatever driver subsystem updates from Greg KH: "Here is the 'big and hairy' char/misc/iio and other small driver subsystem updates for 6.13-rc1. Loads of things in here, and even a fun merge conflict! - rust misc driver bindings and other rust changes to make misc drivers actually possible. I think this is the tipping point, expect to see way more rust drivers going forward now that these bindings are present. Next merge window hopefully we will have pci and platform drivers working, which will fully enable almost all driver subsystems to start accepting (or at least getting) rust drivers. This is the end result of a lot of work from a lot of people, congrats to all of them for getting this far, you've proved many of us wrong in the best way possible, working code :) - IIO driver updates, too many to list individually, that subsystem keeps growing and growing... - Interconnect driver updates - nvmem driver updates - pwm driver updates - platform_driver::remove() fixups, loads of them - counter driver updates - misc driver updates (keba?) - binder driver updates and fixes - loads of other small char/misc/etc driver updates and additions, full details in the shortlog. All of these have been in linux-next for a while, with no other reported issues other than that merge conflict" * tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits) mei: vsc: Fix typo "maintstepping" -> "mainstepping" firmware: Switch back to struct platform_driver::remove() misc: isl29020: Fix the wrong format specifier scripts/tags.sh: Don't tag usages of DEFINE_MUTEX fpga: Switch back to struct platform_driver::remove() mei: vsc: Improve error logging in vsc_identify_silicon() mei: vsc: Do not re-enable interrupt from vsc_tp_reset() dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188 spmi: pmic-arb: fix return path in for_each_available_child_of_node() iio: Move __private marking before struct element priv in struct iio_dev docs: iio: ad7380: add adaq4370-4 and adaq4380-4 iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4 iio: adc: ad7380: use local dev variable to shorten long lines iio: adc: ad7380: fix oversampling formula dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian misc: atmel-ssc: Use of_property_present() for non-boolean properties misc: keba: Add hardware dependency ...

Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2024-11-23T00:19:47Z

Pull MFD updates from Lee Jones: - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and tps65010, have undergone minor code improvements to enhance consistency and fix race conditions. - The syscon driver now utilizes the regmap max_register_is_0 capability for consistent register map configuration across syscons of all sizes. - New device support has been added for QCS8300, qcs615, SA8255p, and samsung,s2dos05, expanding the range of compatible hardware. - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs and avoids loading the charger with UCSI, streamlining functionality. - The bd96801 driver now utilizes the more modern maple tree register cache, improving performance. - The da9052-spi driver has undergone a fix to change the read-mask to write-mask, preventing potential issues. - Unused declarations in max77693 have been removed, and support for samsung,s2dos05 has been added, enhancing code clarity and device compatibility. - Error handling in cs42l43 has been fixed to avoid unbalanced regulator put and ensure proper synchronization during driver removal. - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(), improving code consistency. - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated and reorganized for better clarity and maintainability. - The intel_soc_pmic_bxtwc driver has undergone significant improvements, including the use of IRQ domains for various devices, fixing IRQ domain names duplication, and code refactoring for better consistency and maintainability. - The ipaq-micro driver has received a fix for a missing break statement in the default case, enhancing code robustness. - Support for the AXP323 PMIC has been added to the axp20x driver, along with ensuring a clear relationship between IDs and model names, and allowing multiple regulators, broadening hardware compatibility. - The cs42l43 driver now disables IRQs during suspend for improved power management. - The adp5585 driver has reduced its dependencies by dropping the obsolete dependency on COMPILE_TEST. - Initial support for the MT6328 PMIC has been added to the mt6397 driver, expanding the range of supported hardware. - The rtc-bd70528 driver has been simplified by dropping the IC name from IRQ, improving code readability. - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been updated to enhance clarity and incorporate new features. - The rt5033 driver has received a fix for a missing regmap_del_irq_chip() in the error handling path. - New device support has been added for MSM8917, and the intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client. - The 88pm886 driver has added support for the RTC cell, and the tqmx86 driver has improved its GPIO IRQ setup and added I2C IRQ support, increasing functionality. - The sprd,sc2731 DT schema has been updated and converted to YAML format for better readability and maintainability. * tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits) dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm dt-bindings: mfd: sprd,sc2731: Convert to YAML mfd: tqmx86: Add I2C IRQ support mfd: tqmx86: Make IRQ setup errors non-fatal mfd: tqmx86: Refactor GPIO IRQ setup mfd: tqmx86: Improve gpio_irq module parameter description mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S mfd: 88pm886: Add the RTC cell dt-bindings: mfd: Add Realtek RTL9300 switch peripherals mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client mfd: intel_soc_pmic_*: Consistently use filename as driver name dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917 mfd: rt5033: Fix missing regmap_del_irq_chip() mfd: cgbc-core: Fix error handling paths in cgbc_init_device() dt-bindings: mfd: aspeed: Support for AST2700 mfd: Switch back to struct platform_driver::remove() dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750 mfd: rtc: bd7xxxx Drop IC name from IRQ mfd: mt6397: Add initial support for MT6328 mfd: adp5585: Drop obsolete dependency on COMPILE_TEST ...

dt-bindings: mfd: sprd,sc2731: Convert to YAML

2024-11-12T14:48:45Z

Convert the Spreadtrum SC27xx PMIC bindings to DT schema. Adjust the filename to match the compatible of the only in-tree user, SC2731. Change #interrupt-cells value to 1, as according to [1] that is the correct value. Move partial examples of child nodes in the child node schemas to this new MFD schema to have one complete example. [1] https://lore.kernel.org/lkml/b6a32917d1e231277d240a4084bebb6ad91247e3.1550060544.git.baolin.wang@linaro.org/ Signed-off-by: Stanislav Jakubek Reviewed-by: Rob Herring (Arm) Acked-by: Sebastian Reichel Acked-by: Alexandre Belloni Acked-by: Jonathan Cameron Link: https://lore.kernel.org/r/efd200c3b5b75405e4e450d064b026f10ae2f8e0.1730709384.git.stano.jakubek@gmail.com Signed-off-by: Lee Jones

dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts

2024-11-09T10:40:51Z

adaq4370-4 (2MSPS) and adaq4380-4 (4MSPS) are quad-channel precision data acquisition signal chain μModule solutions compatible with the ad738x family, with the following differences: - pin selectable gain in front of each 4 adc - internal reference is 3V derived from refin-supply (5V) - additional supplies To select the gain a new patternProperties is added to describe each channel. It is restricted to adaq devices. Reviewed-by: Conor Dooley Signed-off-by: Julien Stephan Reviewed-by: David Lechner Link: https://patch.msgid.link/20241030-ad7380-add-adaq4380-4-support-v4-1-864ff02babae@baylibre.com Signed-off-by: Jonathan Cameron

Merge commit '9365f0de4303f82ed4c2db1c39d3de824b249d80' into HEAD

2024-11-09T10:39:52Z

Merge v6.12-rc6 via char-misc-next to get some fixes needed for next few patches in IIO.

Merge 6.12-rc6 into char-misc-next

2024-11-05T08:36:29Z

We need the char/misc/iio fixes in here as well. Signed-off-by: Greg Kroah-Hartman

dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor

2024-11-03T20:33:44Z

Document the bindings for the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor controller by an I2C interface, mainly used in 3D head-on motion sensing applications. The device can be configured with different sensitivities in factory, but the sensitivity value used to calculate value into the Gauss unit is not available from registers, thus the sensitivity is provided by the compatible/device-id string which is based on the part number as described in the datasheet page 2. Datasheet: https://www.allegromicro.com/-/media/files/datasheets/als31300-datasheet.pdf Reviewed-by: Rob Herring (Arm) Signed-off-by: Neil Armstrong Link: https://patch.msgid.link/20241030-topic-input-upstream-als31300-v4-2-494297c9e50a@linaro.org Signed-off-by: Jonathan Cameron

dt-bindings: iio: light: veml6075: document vishay,rset-ohms

2024-11-03T20:33:42Z

The veml6070 provides a configurable integration time by means of an external resistor (Rset in the datasheet) with values between 75 and 1200 kohms. Document vishay,rset-ohms to select the integration time. Signed-off-by: Javier Carrasco Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20241031-veml6070-integration-time-v4-1-c66da6788256@gmail.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: dac: ad5791: Add required voltage supplies

2024-11-03T20:33:42Z

Vcc, iovcc, vrefp, and vrefn are needed for the DAC to work. Add them as required bindings for ad5791. Reviewed-by: David Lechner Reviewed-by: Krzysztof Kozlowski Signed-off-by: Axel Haslam Link: https://patch.msgid.link/20241031071746.848694-3-ahaslam@baylibre.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios

2024-11-03T20:33:42Z

Depending on board layout, the ad57xx may need control of reset, clear, and ldac pins by the host driver. Add optional bindings for these gpios. Reviewed-by: David Lechner Reviewed-by: Krzysztof Kozlowski Signed-off-by: Axel Haslam Link: https://patch.msgid.link/20241031071746.848694-2-ahaslam@baylibre.com Signed-off-by: Jonathan Cameron