pm24.git/Documentation/devicetree/bindings/mmc, branch master

Merge tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2024-11-20T20:51:32Z

Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates" * tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits) mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting mmc: mtk-sd: Fix error handle of probe function mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask mmc: sdhci-esdhc-imx: Implement emmc hardware reset mmc: core: Correct type in variable assignment for UHS-II mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument mmc: sdhci-uhs2: Remove unnecessary variables mmc: sdhci-uhs2: Correct incorrect type in argument mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible mmc: sdhci-uhs2: Remove unnecessary NULL check mmc: core: Fix error paths for UHS-II card init and re-init mmc: core: Add error handling of sd_uhs2_power_up() mmc: core: Simplify sd_uhs2_power_up() mmc: bcm2835: Introduce proper clock handling mmc: bcm2835: Fix type of current clock speed dt-bindings: mmc: Add sdhci compatible for QCS615 mmc: core: Use GFP_NOIO in ACMD22 dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible ...

dt-bindings: mmc: Add sdhci compatible for QCS615

2024-10-25T14:48:54Z

Document the sdhci compatible for Qualcomm QCS615 to support function for emmc and sd card on the Soc. Signed-off-by: Yuanjie Yang Acked-by: Krzysztof Kozlowski Message-ID: <20241023092708.604195-2-quic_yuanjiey@quicinc.com> Signed-off-by: Ulf Hansson

dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible

2024-10-25T14:37:01Z

Document compatible for the SDHCI Controller on SAR2130P platform. Signed-off-by: Dmitry Baryshkov Acked-by: Krzysztof Kozlowski Message-ID: <20241017-sar2130p-mmc-v1-1-c84da16a001e@linaro.org> Signed-off-by: Ulf Hansson

dt-bindings: mmc: mtk-sd: Add mt7988 SoC

2024-10-25T14:22:22Z

Add binding definitions for mmc on MT7988 SoC. Signed-off-by: Frank Wunderlich Reviewed-by: Krzysztof Kozlowski Reviewed-by: AngeloGioacchino Del Regno Message-ID: <20241012143826.7690-2-linux@fw-web.de> Signed-off-by: Ulf Hansson

dt-bindings: mmc: mtk-sd: Add support for MT8196

2024-10-25T14:19:24Z

Extend the devicetree bindings to include the MT8196 mmc controller, new tx/rx would be supported from MT8196, and the register settings of STOP_DLY_SEL and POP_EN_CNT would also be variant. Signed-off-by: Andy-ld Lu Acked-by: Krzysztof Kozlowski Reviewed-by: AngeloGioacchino Del Regno Message-ID: <20241011024906.8173-4-andy-ld.lu@mediatek.com> Signed-off-by: Ulf Hansson

dt-bindings: mmc: Document support for partition table in mmc-card

2024-10-22T14:15:17Z

Document support for defining a partition table in the mmc-card node. This is needed if the eMMC doesn't have a partition table written and the bootloader of the device load data by using absolute offset of the block device. This is common on embedded device that have eMMC installed to save space and have non removable block devices. If an OF partition table is detected, any partition table written in the eMMC will be ignored and won't be parsed. eMMC provide a generic disk for user data and if supported (JEDEC 4.4+) also provide two additional disk ("boot1" and "boot2") for special usage of boot operation where normally is stored the bootloader or boot info. New JEDEC version also supports up to 4 GP partition for other usage called "gp1", "gp2", "gp3", "gp4". Signed-off-by: Christian Marangi Reviewed-by: Rob Herring (Arm) Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20241002221306.4403-7-ansuelsmth@gmail.com Signed-off-by: Jens Axboe

dt-bindings: mmc: sdhci-msm: Document the X1E80100 SDHCI Controller

2024-10-14T10:40:11Z

Document the SDHCI Controller on the X1E80100 Platform. Signed-off-by: Abel Vesa Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241008-x1e80100-qcp-sdhc-v1-1-dfef4c92ae31@linaro.org Signed-off-by: Ulf Hansson

dt-bindings: mmc: sdhci-msm: add IPQ5424 compatible

2024-10-14T10:40:10Z

The IPQ5424 supports eMMC with an SDHCI controller. Add the appropriate compatible to the documentation. Acked-by: Rob Herring (Arm) Signed-off-by: Sricharan Ramabadhran Link: https://lore.kernel.org/r/20241004102342.2414317-4-quic_srichara@quicinc.com Signed-off-by: Ulf Hansson

dt-bindings: mmc: cdns,sdhci: ref sdhci-common.yaml

2024-10-14T10:40:10Z

Since the Cadence sdhci controller is sdhci compatible, the cdns,sdhci.yaml should ref sdhci-common.yaml to use 'sdhci-caps-mask' property. Signed-off-by: Pierre-Henry Moussay Link: https://lore.kernel.org/r/20240930095449.1813195-17-pierre-henry.moussay@microchip.com Signed-off-by: Ulf Hansson

dt-bindings: mmc: cdns: document Microchip PIC64GX MMC/SDHCI controller

2024-10-14T10:40:10Z

PIC64GX is compatible with cdns,sd4hc without any additional feature Signed-off-by: Pierre-Henry Moussay Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240930095449.1813195-12-pierre-henry.moussay@microchip.com Signed-off-by: Ulf Hansson