pm24.git/Documentation/devicetree/bindings/power/supply, branch master

Merge tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2024-11-28T17:28:09Z

Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - replace power_supply_register_no_ws() with power_supply_register() and a new "no_wakeup_source" field in struct power_supply_config - constify battery info tables in the core and all drivers - switch back to remove callback for all platform drivers - allow power_supply_put() to be called from atomic context - mark attribute arrays read-only after init Power-supply drivers: - new driver for TWL6030 and TWL6032 - rk817: improve battery capacity calibration - misc small cleanups and fixes" * tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits) power: reset: ep93xx: add AUXILIARY_BUS dependency dt-bindings: power: reset: Convert mode-.* properties to array power: supply: sc27xx: Fix battery detect GPIO probe dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio reset: keystone-reset: remove unused macros power: supply: axp20x_battery: Use scaled iio_read_channel power: supply: axp20x_usb_power: Use scaled iio_read_channel power: supply: generic-adc-battery: change my gmail power: supply: pmu_battery: Set power supply type to BATTERY power: Switch back to struct platform_driver::remove() power: supply: hwmon: move interface to private header power: supply: rk817: Update battery capacity calibration power: supply: rk817: stop updating info in suspend power: supply: rt9471: Use IC status regfield to report real charger status power: supply: rt9471: Fix wrong WDT function regfield declaration dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example power: supply: core: mark attribute arrays as ro_after_init power: supply: core: unexport power_supply_property_is_writeable() power: supply: core: use device mutex wrappers power: supply: bq27xxx: Fix registers of bq27426 ...

dt-bindings: mfd: sprd,sc2731: Convert to YAML

2024-11-12T14:48:45Z

Convert the Spreadtrum SC27xx PMIC bindings to DT schema. Adjust the filename to match the compatible of the only in-tree user, SC2731. Change #interrupt-cells value to 1, as according to [1] that is the correct value. Move partial examples of child nodes in the child node schemas to this new MFD schema to have one complete example. [1] https://lore.kernel.org/lkml/b6a32917d1e231277d240a4084bebb6ad91247e3.1550060544.git.baolin.wang@linaro.org/ Signed-off-by: Stanislav Jakubek Reviewed-by: Rob Herring (Arm) Acked-by: Sebastian Reichel Acked-by: Alexandre Belloni Acked-by: Jonathan Cameron Link: https://lore.kernel.org/r/efd200c3b5b75405e4e450d064b026f10ae2f8e0.1730709384.git.stano.jakubek@gmail.com Signed-off-by: Lee Jones

dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio

2024-11-11T22:05:19Z

While the bindings have always used the correct 'battery-detect-gpios' property, the DTS and the Linux driver have been using the incorrect 'bat-detect-gpio' property. Document this property and mark it as deprecated. Signed-off-by: Stanislav Jakubek Acked-by: Krzysztof Kozlowski Reviewed-by: Chunyan Zhang Link: https://lore.kernel.org/r/f334c973dd4e6390a0cd51dbde358277a07604d7.1730720720.git.stano.jakubek@gmail.com Signed-off-by: Sebastian Reichel

dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example

2024-10-16T21:24:39Z

Enabling dtc interrupt_provider check reveals the example is missing the "interrupt-controller" property as it is a dependency of "#interrupt-cells". However, the PMIC parent node is not an interrupt controller at all, so the "#interrupt-cells" is erroneous. Signed-off-by: Rob Herring (Arm) Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240926213727.3064977-1-robh@kernel.org Signed-off-by: Sebastian Reichel

dt-bindings: power: supply: Add TI TWL603X charger

2024-10-16T20:23:39Z

Use a fallback compatible since for especially for generic defensive setup of parameters, both 6030 and 6032 are the same and U-Boot actually uses a generic 6030/32 function to enable the charger. Signed-off-by: Andreas Kemnade Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241016080314.222674-2-andreas@kemnade.info Signed-off-by: Sebastian Reichel

dt-bindings: power: supply: axp20x: Add AXP717 compatible

2024-09-03T21:50:34Z

Add binding information for AXP717. Acked-by: Krzysztof Kozlowski Signed-off-by: Chris Morgan Acked-by: Jonathan Cameron Link: https://lore.kernel.org/r/20240821215456.962564-11-macroalpha82@gmail.com Signed-off-by: Sebastian Reichel

dt-bindings: power: supply: axp20x: Add AXP717 compatible

2024-09-03T21:50:34Z

Add support for the AXP717. It has BC 1.2 detection like the AXP813 and uses ADC channels like all other AXP devices, but otherwise is very different requiring new registers for most functions. Acked-by: Krzysztof Kozlowski Acked-by: Chen-Yu Tsai Signed-off-by: Chris Morgan Link: https://lore.kernel.org/r/20240821215456.962564-10-macroalpha82@gmail.com Signed-off-by: Sebastian Reichel

dt-bindings: power: supply: axp20x-battery: Add monitored-battery

2024-08-27T16:12:25Z

Document the monitored-battery property, which the existing driver can use to set certain properties. Acked-by: Krzysztof Kozlowski Signed-off-by: Chris Morgan Link: https://lore.kernel.org/r/20240821215456.962564-8-macroalpha82@gmail.com Signed-off-by: Sebastian Reichel

dt-bindings: power: supply: axp20x: Add input-current-limit-microamp

2024-08-27T16:12:25Z

Allow specifying a hard limit of the maximum input current. Some PMICs such as the AXP717 can pull up to 3.25A, so allow a value to be specified that clamps this in the event the hardware is not designed for it. Signed-off-by: Chris Morgan Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240821215456.962564-6-macroalpha82@gmail.com Signed-off-by: Sebastian Reichel

dt-bindings: power: supply: sc27xx-fg: add low voltage alarm IRQ

2024-08-27T09:44:24Z

The SC27XX fuel gauge supports a low voltage alarm IRQ, which is used for more accurate battery capacity measurements with lower voltages. This was unfortunately never documented in bindings, do so now. The only in-tree user (sc2731.dtsi) has had interrupts specified since its initial fuel-gauge submission and the current kernel driver returns an error when no interrupt is specified, so also add it to the required list. Signed-off-by: Stanislav Jakubek Acked-by: Conor Dooley Link: https://lore.kernel.org/r/Zr3SAHlq5A78QvrW@standask-GA-A55M-S2HP Signed-off-by: Sebastian Reichel