pm24.git/Documentation/devicetree/bindings/usb, branch master

Merge tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-11-29T19:19:31Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.13-rc1. Overall, a pretty slow development cycle, the majority of the work going into the debugfs interface for the thunderbolt (i.e. USB4) code, to help with debugging the myrad ways that hardware vendors get their interfaces messed up. Other than that, here's the highlights: - thunderbolt changes and additions to debugfs interfaces - lots of device tree updates for new and old hardware - UVC configfs gadget updates and new apis for features - xhci driver updates and fixes - dwc3 driver updates and fixes - typec driver updates and fixes - lots of other small updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property dt-bindings: connector: Add time property for Sink BC12 detection completion usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb usb: dwc3: gadget: Cleanup SG handling usb: dwc3: gadget: Fix looping of queued SG entries usb: dwc3: gadget: Fix checking for number of TRBs left usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED Revert "usb: gadget: composite: fix OS descriptors w_value logic" usb: ehci-spear: fix call balance of sehci clk handling routines USB: make to_usb_device_driver() use container_of_const() USB: make to_usb_driver() use container_of_const() USB: properly lock dynamic id list when showing an id USB: make single lock for all usb dynamic id lists drivers/usb/storage: refactor min with min_t drivers/usb/serial: refactor min with min_t drivers/usb/musb: refactor min/max with min_t/max_t drivers/usb/mon: refactor min with min_t drivers/usb/misc: refactor min with min_t drivers/usb/host: refactor min/max with min_t/max_t ...

Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

2024-11-27T21:33:43Z

Pull phy updates from Vinod Koul: "New hardware support: - ST STM32MP25 combophy support - Sparx5 support for lan969x serdes and updates to driver to support this - NXP PTN3222 eUSB2 to USB2 redriver - Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2 support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP UFS PHY support and SA8775P eDP PHY support - Rockchip rk3576 usbdp and rk3576 usb2 phy support - Binding for Microchip ATA6561 can phy Updates: - Freescale driver updates from hdmi support - Conversion of rockchip rk3228 hdmi phy binding to yaml - Broadcom usb2-phy deprecated support dropped and USB init array update for BCM4908 - TI USXGMII mode support in J7200 - Switch back to platform_driver::remove() subsystem update" * tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits) phy: qcom: qmp: Fix lecacy-legacy typo phy: lan969x-serdes: add support for lan969x serdes driver dt-bindings: phy: sparx5: document lan969x phy: sparx5-serdes: add support for branching on chip type phy: sparx5-serdes: add indirection layer to register macros phy: sparx5-serdes: add function for getting the CMU index phy: sparx5-serdes: add ops to match data phy: sparx5-serdes: add constant for the number of CMU's phy: sparx5-serdes: add constants to match data phy: sparx5-serdes: add support for private match data phy: bcm-ns-usb2: drop support for old binding variant dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300 dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561 phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll() phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l() phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out() phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL ...

dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property

2024-11-16T08:05:44Z

Add usage of "sink-bc12-completion-time-ms" connector property to max33359 controller for delaying PD negotiation till BC1.2 detection completes. This overcomes the occasional delays observed while receiving PD messages where BC1.2 detection runs in parallel. Signed-off-by: Amit Sunil Dhamne Reviewed-by: Badhri Jagan Sridharan Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241103034402.2460252-3-amitsd@google.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: add A523 compatible string for EHCI and OCHI

2024-11-12T11:16:48Z

The Allwinner A523/T527 feature generic EHCI and OHCI compatible USB-2.0 host controllers (in addition to an MUSB and an XHCI controller). Add the new name to the list of supported compatible strings. Signed-off-by: Andre Przywara Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20241111013033.22793-10-andre.przywara@arm.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: sunxi-musb: add Allwinner A523 compatible string

2024-11-12T11:16:46Z

The Allwinner A523/T527 SoCs have a MUSB controller fully compatible to the D1 (and ultimately the A33), with five endpoints. Add the new name to the list of compatible strings. Signed-off-by: Andre Przywara Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20241111013033.22793-9-andre.przywara@arm.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: qcom,dwc3: Add SAR2130P compatible

2024-11-05T12:29:17Z

Document compatible for the Synopsys DWC3 USB Controller on SAR2130P platform. Signed-off-by: Dmitry Baryshkov Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241017-sar2130p-usb-v1-1-21e01264b70e@linaro.org Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: Describe TUSB1046 crosspoint switch

2024-11-04T00:29:53Z

Describe the Texas Instruments TUSB1046-DCI USB Type-C linear redriver crosspoint switch. This component is used to handle orientation switching and DisplayPort altmode multiplexing for Type-C signals. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Romain Gantois Link: https://lore.kernel.org/r/20241024-tusb1046-v2-1-d031b1a43e6d@bootlin.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: add TUSB73x0 PCIe

2024-11-04T00:28:48Z

Add device tree bindings for TI's TUSB73x0 PCIe-to-USB 3.0 xHCI host controller. The controller supports software configuration through PCIe registers, such as controlling the PWRONx polarity via the USB control register (E0h). Datasheet: https://www.ti.com/lit/ds/symlink/tusb7320.pdf Signed-off-by: Parth Pancholi Signed-off-by: Francesco Dolcini Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241029072444.8827-2-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: sunxi-musb: Add A100 compatible string

2024-11-02T11:32:40Z

The A100 MUSB peripheral has 10 endpoints, and thus is compatible with the A33 version. Signed-off-by: Cody Eksal Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20241031070232.1793078-6-masterr3c0rd@epochal.quest Signed-off-by: Chen-Yu Tsai

dt-bindings: usb: Add A100 compatible string

2024-11-02T11:32:39Z

The Allwinner A100 contains two fully OHCI/EHCI compatible USB host controllers. Add their compatible strings to the list of generic OHCI/EHCI controllers. Signed-off-by: Cody Eksal Reviewed-by: Andre Przywara Acked-by: Rob Herring (Arm) Link: https://patch.msgid.link/20241031070232.1793078-5-masterr3c0rd@epochal.quest Signed-off-by: Chen-Yu Tsai