pm24.git/Documentation/devicetree/bindings, branch master

Merge tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm

2024-12-06T19:24:00Z

Pull pmdomain fixes from Ulf Hansson: "Core: - Fix a couple of memory-leaks during genpd init/remove Providers: - imx: Adjust delay for gpcv2 to fix power up handshake - mediatek: Fix DT bindings by adding another nested power-domain layer" * tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: imx: gpcv2: Adjust delay after power up handshake pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails pmdomain: core: Add missing put_device() dt-bindings: power: mediatek: Add another nested power-domain layer

Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog

2024-12-05T18:03:43Z

Pull watchdog updates from Wim Van Sebroeck: - Add support for exynosautov920 SoC - Add support for Airoha EN7851 watchdog - Add support for MT6735 TOPRGU/WDT - Delete the cpu5wdt driver - Always print when registering watchdog fails - Several other small fixes and improvements * tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: rti: of: honor timeout-sec property watchdog: s3c2410_wdt: add support for exynosautov920 SoC dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings watchdog: mediatek: Add support for MT6735 TOPRGU/WDT watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart() dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property dt-bindings: watchdog: Document Qualcomm QCS8300 docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs" watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler watchdog: Switch back to struct platform_driver::remove() watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04 watchdog: da9063: Remove __maybe_unused notations watchdog: da9063: Do not use a global variable watchdog: Delete the cpu5wdt driver watchdog: Add support for Airoha EN7851 watchdog dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581 watchdog: sl28cpld_wdt: don't print out if registering watchdog fails watchdog: rza_wdt: don't print out if registering watchdog fails watchdog: rti_wdt: don't print out if registering watchdog fails ...

dt-bindings: power: mediatek: Add another nested power-domain layer

2024-12-02T15:58:52Z

The MT8188 SoC has a more in-depth power-domain tree, and the CHECK_DTBS=y check could fail because the current MediaTek power dt-binding is insufficient to cover its CAM_SUBA and CAM_SUBB sub-domains. Add one more nested power-domain layer to pass the check. Acked-by: Rob Herring (Arm) Signed-off-by: Fei Shao Message-ID: <20241001113052.3124869-2-fshao@chromium.org> Signed-off-by: Ulf Hansson

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2024-11-30T22:51:08Z

Pull more kvm updates from Paolo Bonzini: - ARM fixes - RISC-V Svade and Svadu (accessed and dirty bit) extension support for host and guest * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM dt-bindings: riscv: Add Svade and Svadu Entries RISC-V: Add Svade and Svadu Extensions Support KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition KVM: arm64: vgic: Make vgic_get_irq() more robust KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR

Merge tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2024-11-30T19:18:16Z

Pull RTC updates from Alexandre Belloni: "New drivers: - Amlogic A4 and A5 RTC - Marvell 88PM886 PMIC RTC - Renesas RTCA-3 for Renesas RZ/G3S Driver updates: - ab-eoz9: fix temperature and alarm support - cmos: improve locking behaviour - isl12022: add alarm support - m48t59: improve epoch handling - mt6359: add range - rzn1: fix BCD conversions and simplify driver" * tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits) rtc: ab-eoz9: don't fail temperature reads on undervoltage notification rtc: rzn1: reduce register access rtc: rzn1: drop superfluous wday calculation m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly rtc: m48t59: Use platform_data struct for year offset value rtc: ab-eoz9: fix abeoz9_rtc_read_alarm rtc: rv3028: fix RV3028_TS_COUNT type rtc: rzn1: update Michel's email rtc: rzn1: fix BCD to rtc_time conversion errors rtc: amlogic-a4: fix compile error rtc: amlogic-a4: drop error messages MAINTAINERS: Add an entry for Amlogic RTC driver rtc: support for the Amlogic on-chip RTC dt-bindings: rtc: Add Amlogic A4 and A5 RTC rtc: add driver for Marvell 88PM886 PMIC RTC rtc: check if __rtc_read_time was successful in rtc_timer_do_work() rtc: pcf8563: Switch to regmap rtc: pcf8563: Sort headers alphabetically rtc: abx80x: Fix WDT bit position of the status register ...

Merge tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-11-30T17:03:16Z

Pull tty / serial driver updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.13-rc1. Nothing major at all this time, only some small changes: - few device tree binding updates - 8250_exar serial driver updates - imx serial driver updates - sprd_serial driver updates - other tiny serial driver updates, full details in the shortlog All of these have been in linux-next for a while with one reported issue, but that commit has now been reverted" * tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits) Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" serial: amba-pl011: fix build regression dt-bindings: serial: Add a new compatible string for ums9632 serial: sprd: Add support for sc9632 tty/serial/altera_uart: unwrap error log string tty/serial/altera_jtaguart: unwrap error log string serial: amba-pl011: Fix RX stall when DMA is used tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler serial: 8250_fintek: Add support for F81216E serial: sh-sci: Clean sci_ports[0] after at earlycon exit tty: atmel_serial: Fix typo retreives to retrieves tty: atmel_serial: Use devm_platform_ioremap_resource() serial: 8250: omap: Move pm_runtime_get_sync tty: serial: samsung: Add Exynos8895 compatible dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible serial: 8250_dw: Add Sophgo SG2044 quirk dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry. altera_jtaguart: Use dev_err() to report error attaching IRQ altera_uart: Use dev_err() to report error attaching IRQ handler ...

Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-11-29T19:58:27Z

Pull char/misc/IIO/whatever driver subsystem updates from Greg KH: "Here is the 'big and hairy' char/misc/iio and other small driver subsystem updates for 6.13-rc1. Loads of things in here, and even a fun merge conflict! - rust misc driver bindings and other rust changes to make misc drivers actually possible. I think this is the tipping point, expect to see way more rust drivers going forward now that these bindings are present. Next merge window hopefully we will have pci and platform drivers working, which will fully enable almost all driver subsystems to start accepting (or at least getting) rust drivers. This is the end result of a lot of work from a lot of people, congrats to all of them for getting this far, you've proved many of us wrong in the best way possible, working code :) - IIO driver updates, too many to list individually, that subsystem keeps growing and growing... - Interconnect driver updates - nvmem driver updates - pwm driver updates - platform_driver::remove() fixups, loads of them - counter driver updates - misc driver updates (keba?) - binder driver updates and fixes - loads of other small char/misc/etc driver updates and additions, full details in the shortlog. All of these have been in linux-next for a while, with no other reported issues other than that merge conflict" * tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits) mei: vsc: Fix typo "maintstepping" -> "mainstepping" firmware: Switch back to struct platform_driver::remove() misc: isl29020: Fix the wrong format specifier scripts/tags.sh: Don't tag usages of DEFINE_MUTEX fpga: Switch back to struct platform_driver::remove() mei: vsc: Improve error logging in vsc_identify_silicon() mei: vsc: Do not re-enable interrupt from vsc_tp_reset() dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188 spmi: pmic-arb: fix return path in for_each_available_child_of_node() iio: Move __private marking before struct element priv in struct iio_dev docs: iio: ad7380: add adaq4370-4 and adaq4380-4 iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4 iio: adc: ad7380: use local dev variable to shorten long lines iio: adc: ad7380: fix oversampling formula dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian misc: atmel-ssc: Use of_property_present() for non-boolean properties misc: keba: Add hardware dependency ...

Merge tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-11-29T19:19:31Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.13-rc1. Overall, a pretty slow development cycle, the majority of the work going into the debugfs interface for the thunderbolt (i.e. USB4) code, to help with debugging the myrad ways that hardware vendors get their interfaces messed up. Other than that, here's the highlights: - thunderbolt changes and additions to debugfs interfaces - lots of device tree updates for new and old hardware - UVC configfs gadget updates and new apis for features - xhci driver updates and fixes - dwc3 driver updates and fixes - typec driver updates and fixes - lots of other small updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property dt-bindings: connector: Add time property for Sink BC12 detection completion usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb usb: dwc3: gadget: Cleanup SG handling usb: dwc3: gadget: Fix looping of queued SG entries usb: dwc3: gadget: Fix checking for number of TRBs left usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED Revert "usb: gadget: composite: fix OS descriptors w_value logic" usb: ehci-spear: fix call balance of sehci clk handling routines USB: make to_usb_device_driver() use container_of_const() USB: make to_usb_driver() use container_of_const() USB: properly lock dynamic id list when showing an id USB: make single lock for all usb dynamic id lists drivers/usb/storage: refactor min with min_t drivers/usb/serial: refactor min with min_t drivers/usb/musb: refactor min/max with min_t/max_t drivers/usb/mon: refactor min with min_t drivers/usb/misc: refactor min with min_t drivers/usb/host: refactor min/max with min_t/max_t ...

Merge tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2024-11-28T17:40:53Z

Pull regulator fixes from Mark Brown: "A couple of fixes that came in during the merge window, plus documetation of a new device ID for the Qualcomm LABIBB driver. There's a core fix for the rarely used current constraints and a fix for the Qualcomm RPMH driver which had described only one of the two voltage ranges that the hardware could control, creating a potential incompatibility with the configuration left by firmware" * tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Ignore unset max_uA constraints in current limit check dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator regulator: qcom-rpmh: Update ranges for FTSMPS525

Merge tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2024-11-28T17:28:09Z

Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - replace power_supply_register_no_ws() with power_supply_register() and a new "no_wakeup_source" field in struct power_supply_config - constify battery info tables in the core and all drivers - switch back to remove callback for all platform drivers - allow power_supply_put() to be called from atomic context - mark attribute arrays read-only after init Power-supply drivers: - new driver for TWL6030 and TWL6032 - rk817: improve battery capacity calibration - misc small cleanups and fixes" * tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits) power: reset: ep93xx: add AUXILIARY_BUS dependency dt-bindings: power: reset: Convert mode-.* properties to array power: supply: sc27xx: Fix battery detect GPIO probe dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio reset: keystone-reset: remove unused macros power: supply: axp20x_battery: Use scaled iio_read_channel power: supply: axp20x_usb_power: Use scaled iio_read_channel power: supply: generic-adc-battery: change my gmail power: supply: pmu_battery: Set power supply type to BATTERY power: Switch back to struct platform_driver::remove() power: supply: hwmon: move interface to private header power: supply: rk817: Update battery capacity calibration power: supply: rk817: stop updating info in suspend power: supply: rt9471: Use IC status regfield to report real charger status power: supply: rt9471: Fix wrong WDT function regfield declaration dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example power: supply: core: mark attribute arrays as ro_after_init power: supply: core: unexport power_supply_property_is_writeable() power: supply: core: use device mutex wrappers power: supply: bq27xxx: Fix registers of bq27426 ...