pm24.git/Documentation, branch v5.6

Merge tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-03-27T20:52:32Z

Pull ARM DT and driver fixes from Arnd Bergmann: "For the devicetree files, there are a total of 20 patches, almost entirely for 32-bit machines: - The Allwinner/sun9i r40 SoC dtsi file contains a number of issues, both for correctness and for style that are addressed in separate patches. This causes most of the changed lines of the DT updates this time. - More Allwinner updates fixing the identification of the security system on sun8i/A33, a recent regression of the A83t ethernet, and a few board specific issues on the TBS-A711 macine. - Several bug fixes for OMAP dts files, most notably fixing the timings for the NAND flash on the Nokia N900 that regressed a while ago after the move to configuring them from DT. Some other OMAPs now set the correct dma limits on the L3 bus, and a regression fix addresses lost Ethernet on dm814x - One incorrect setting in the newly added Raspberry Pi Zero W that may cause issues with the SD card controller. - A missing property on the bcm2835 firmware node caused incorrect DMA settings. - An old bug on the oxnas platform causing spurious interrupts is finally addressed. - A regression on the Exynos Midas board broke the OLED panel power supply. - The i.MX6 phycore SoM specified the wrong voltage for the SoC, this is now set to the values from the datasheet. - Some 64-bit machines use a deprecated string to identify the PSCI firmware. There are also several small code fixes addressing mostly serious issues: - Fix the sunxi rsb bus access to no longer return incorrect data when mixing 8 and 16 bit I/O. - Fix a suspend/resume regression on the OMAP2+ lcdc from a missing quirk in the ti-sysc driver - Fix a NULL pointer access from a race in the fsl dpio driver - Fix a v5.5 regression in the exynos-chipid driver that caused an invalid error code probing the device on non-exynos platforms - Fix an out-of-bounds access in the AMD TEE driver" * tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) soc: samsung: chipid: Fix return value on non-Exynos platforms arm64: dts: Fix leftover entry-methods for PSCI ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards ARM: dts: oxnas: Fix clear-mask property ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: bcm2835-rpi-zero-w: Add missing pinctrl name ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage soc: fsl: dpio: register dpio irq handlers after dpio create tee: amdtee: out of bounds read in find_session() ARM: dts: N900: fix onenand timings bus: ti-sysc: Fix quirk flags for lcdc on am335x ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-03-27T03:49:44Z

Pull input fixes from Dmitry Torokhov: - a fix to generate proper timestamps on key autorepeat events that were broken recently - a fix for Synaptics driver to only activate reduced reporting mode when explicitly requested - a new keycode for "selective screenshot" function - other assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: fix stale timestamp on key autorepeat events Input: move the new KEY_SELECTIVE_SCREENSHOT keycode Input: avoid BIT() macro usage in the serio.h UAPI header Input: synaptics-rmi4 - set reduced reporting mode only when requested Input: synaptics - enable RMI on HP Envy 13-ad105ng Input: allocate keycode for "Selective Screenshot" key Input: tm2-touchkey - add support for Coreriver TC360 variant dt-bindings: input: add Coreriver TC360 binding dt-bindings: vendor-prefixes: Add Coreriver vendor prefix Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2020-03-26T22:30:49Z

Pull KVM fixes from Paolo Bonzini: "x86 bug fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: X86: Narrow down the IPI fastpath to single target IPI KVM: LAPIC: Also cancel preemption timer when disarm LAPIC timer KVM: VMX: don't allow memory operands for inline asm that modifies SP KVM: LAPIC: Mark hrtimer for period or oneshot mode to expire in hard interrupt context KVM: SVM: Issue WBINVD after deactivating an SEV guest KVM: SVM: document KVM_MEM_ENCRYPT_OP, let userspace detect if SEV is available KVM: x86: remove bogus user-triggerable WARN_ON

Merge tag 'zonefs-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs

2020-03-25T17:34:02Z

Pull zonefs fix from Damien Le Moal: "A single fix from me to correctly handle the size of read-only zone files" * tag 'zonefs-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonfs: Fix handling of read-only zones

Merge tag 'sunxi-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

2020-03-25T12:42:11Z

Allwinner Fixes for 5.6 - part 2 This follows up on the previous 5.6 fixes tag with a fix for the A33 Security System (crypto offloading hardware). The hardware was found to not be compatible with existing hardware and a new compatible was needed. The driver change was picked up right before the previous -rc6 and the DT bindings and DT changes were not picked up. The goal is to have all the changes in the same release, that is v5.6. * tag 'sunxi-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS Link: https://lore.kernel.org/r/20200313060727.GA23962@wens.csie.org Signed-off-by: Arnd Bergmann

zonfs: Fix handling of read-only zones

2020-03-25T02:28:26Z

The write pointer of zones in the read-only consition is defined as invalid by the SCSI ZBC and ATA ZAC specifications. It is thus not possible to determine the correct size of a read-only zone file on mount. Fix this by handling read-only zones in the same manner as offline zones by disabling all accesses to the zone (read and write) and initializing the inode size of the read-only zone to 0). For zones found to be in the read-only condition at runtime, only disable write access to the zone and keep the size of the zone file to its last updated value to allow the user to recover previously written data. Also fix zonefs documentation file to reflect this change. Signed-off-by: Damien Le Moal Reviewed-by: Johannes Thumshirn

Merge tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dma

2020-03-24T16:53:12Z

Pull dmaengine fixes from Vinod Koul: "Late fixes in dmaengine for v5.6: - move .device_release missing log warning to debug - couple of maintainer entries for HiSilicon and IADX drivers - off-by-one fix for idxd driver - documentation warning fixes - TI k3 dma error handling fix" * tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: ti: k3-udma-glue: Fix an error handling path in 'k3_udma_glue_cfg_rx_flow()' MAINTAINERS: Add maintainer for HiSilicon DMA engine driver dmaengine: idxd: fix off by one on cdev dwq refcount MAINTAINERS: rectify the INTEL IADX DRIVER entry dmaengine: move .device_release missing log warning to debug level docs: dmaengine: provider.rst: get rid of some warnings

KVM: SVM: document KVM_MEM_ENCRYPT_OP, let userspace detect if SEV is available

2020-03-20T17:47:52Z

Userspace has no way to query if SEV has been disabled with the sev module parameter of kvm-amd.ko. Actually it has one, but it is a hack: do ioctl(KVM_MEM_ENCRYPT_OP, NULL) and check if it returns EFAULT. Make it a little nicer by returning zero for SEV enabled and NULL argument, and while at it document the ioctl arguments. Cc: Brijesh Singh Signed-off-by: Paolo Bonzini

Merge tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2020-03-19T16:57:48Z

Pull Kbuild fixes from Masahiro Yamada: - fix __uint128_t capability test in Kconfig when GCC that defaults to 32-bit is used to build the 64-bit kernel - suppress new noisy Clang warnings -Wpointer-to-enum-cast - move the namespace field in Module.symvers for the backward compatibility reason for the depmod tool - use available compression for initramdisk when INTRAMFS_SOURCE is defined, which was the original behavior - fix modpost to handle correct large section numbers when it refers to modversion CRCs and module namespaces - fix comments and documents * tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts/kallsyms: fix wrong kallsyms_relative_base modpost: Get proper section index by get_secindex() instead of st_shndx initramfs: restore default compression behavior modpost: move the namespace field in Module.symvers last kbuild: Disable -Wpointer-to-enum-cast kbuild: doc: fix references to other documents int128: fix __uint128_t compiler test in Kconfig kconfig: introduce m32-flag and m64-flag kbuild: Fix inconsistent comment

modpost: move the namespace field in Module.symvers last

2020-03-16T23:59:03Z

In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module). In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now. Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow. Cc: stable@vger.kernel.org Fixes: cb9b55d21fe0 ("modpost: add support for symbol namespaces") Tested-by: Matthias Maennich Reviewed-by: Matthias Maennich Reviewed-by: Lucas De Marchi Signed-off-by: Jessica Yu Signed-off-by: Masahiro Yamada