pm24.git/Documentation, branch v5.9

Merge tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-10-11T17:53:37Z

Pull x86 fixes from Ingo Molnar: "Two fixes: - Fix a (hopefully final) IRQ state tracking bug vs MCE handling - Fix a documentation link" * tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/x86: Fix incorrect references to zero-page.txt x86/mce: Use idtentry_nmi_enter/exit()

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-10-05T18:27:14Z

Pull networking fixes from David Miller: 1) Make sure SKB control block is in the proper state during IPSEC ESP-in-TCP encapsulation. From Sabrina Dubroca. 2) Various kinds of attributes were not being cloned properly when we build new xfrm_state objects from existing ones. Fix from Antony Antony. 3) Make sure to keep BTF sections, from Tony Ambardar. 4) TX DMA channels need proper locking in lantiq driver, from Hauke Mehrtens. 5) Honour route MTU during forwarding, always. From Maciej Żenczykowski. 6) Fix races in kTLS which can result in crashes, from Rohit Maheshwari. 7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan Jha. 8) Use correct address family in xfrm state lookups, from Herbert Xu. 9) A bridge FDB flush should not clear out user managed fdb entries with the ext_learn flag set, from Nikolay Aleksandrov. 10) Fix nested locking of netdev address lists, from Taehee Yoo. 11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau. 12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit. 13) Don't free command entries in mlx5 while comp handler could still be running, from Eran Ben Elisha. 14) Error flow of request_irq() in mlx5 is busted, due to an off by one we try to free and IRQ never allocated. From Maor Gottlieb. 15) Fix leak when dumping netlink policies, from Johannes Berg. 16) Sendpage cannot be performed when a page is a slab page, or the page count is < 1. Some subsystems such as nvme were doing so. Create a "sendpage_ok()" helper and use it as needed, from Coly Li. 17) Don't leak request socket when using syncookes with mptcp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) net/core: check length before updating Ethertype in skb_mpls_{push,pop} net: mvneta: fix double free of txq->buf net_sched: check error pointer in tcf_dump_walker() net: team: fix memory leak in __team_options_register net: typhoon: Fix a typo Typoon --> Typhoon net: hinic: fix DEVLINK build errors net: stmmac: Modify configuration method of EEE timers tcp: fix syn cookied MPTCP request socket leak libceph: use sendpage_ok() in ceph_tcp_sendpage() scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map() drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage() tcp: use sendpage_ok() to detect misused .sendpage nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage() net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send net: introduce helper sendpage_ok() in include/linux/net.h net: usb: pegasus: Proper error handing when setting pegasus' MAC address net: core: document two new elements of struct net_device netlink: fix policy dump leak net/mlx5e: Fix race condition on nhe->n pointer in neigh update net/mlx5e: Fix VLAN create flow ...

Documentation/x86: Fix incorrect references to zero-page.txt

2020-10-02T20:49:29Z

The file zero-page.txt does not exit. Add links to zero-page.rst instead. [ bp: Massage a bit. ] Signed-off-by: Heinrich Schuchardt Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20201002190623.7489-1-xypron.glpk@gmx.de

Merge tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2020-10-02T17:05:56Z

Pull power management fixes from Rafael Wysocki: "These fix one more issue related to the recent RCU-lockdep changes, a typo in documentation and add a missing return statement to intel_pstate. Specifics: - Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf Hansson) - Fix typo in the PM documentation (Yoann Congal) - Add return statement that is missing after recent changes in the intel_pstate driver (Zhang Rui)" * tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ARM: imx6q: Fixup RCU usage for cpuidle Documentation: PM: Fix a reStructuredText syntax error cpufreq: intel_pstate: Fix missing return statement

Merge tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2020-10-02T16:51:42Z

Pull GPIO fixes from Linus Walleij: "Some late GPIO fixes for the v5.9 series: - Fix compiler warnings on the OMAP when PM is disabled - Clear the interrupt when setting edge sensitivity on the Spreadtrum driver. - Fix up spurious interrupts on the TC35894. - Support threaded interrupts on the Siox controller. - Fix resource leaks on the mockup driver. - Fix line event handling in syscall compatible mode for the character device. - Fix an unitialized variable in the PCA953A driver. - Fix access to all GPIO IRQs on the Aspeed AST2600. - Fix line direction on the AMD FCH driver. - Use the bitmap API instead of compiler intrinsics for bit manipulation in the PCA953x driver" * tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x gpio: pca953x: Use bitmap API over implicit GCC extension gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION gpio: aspeed: fix ast2600 bank properties gpio/aspeed-sgpio: don't enable all interrupts by default gpio/aspeed-sgpio: enable access to all 80 input & output sgpios gpio: pca953x: Fix uninitialized pending variable gpiolib: Fix line event handling in syscall compatible mode gpio: mockup: fix resource leak in error path gpio: siox: explicitly support only threaded irqs gpio: tc35894: fix up tc35894 interrupt configuration gpio: sprd: Clear interrupt when setting the type as edge gpio: omap: Fix warnings if PM is disabled

Documentation: PM: Fix a reStructuredText syntax error

2020-09-30T15:40:37Z

Fix a reStructuredText syntax error in the cpuidle PM admin-guide documentation: the ``...'' quotation marks are parsed as partial ''...'' reStructuredText markup and break the output formatting. This change them to "...". Signed-off-by: Yoann Congal Signed-off-by: Rafael J. Wysocki

Merge tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2020-09-30T00:56:30Z

Pull devicetree fixes from Rob Herring: - Fix handling of HOST_EXTRACFLAGS for dtc - Several warning fixes for DT bindings * tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting dt-bindings: Fix 'reg' size issues in zynqmp examples ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding dt-bindings: crypto: sa2ul: fix a DT binding check warning

dt-bindings: Fix 'reg' size issues in zynqmp examples

2020-09-29T20:39:02Z

The default sizes in examples for 'reg' are 1 cell each. Fix the incorrect sizes in zynqmp examples: Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@fd4c0000:reg:0: [0, 4249616384, 0, 4096] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:0: [0, 4249485312, 0, 4096] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:1: [0, 4249526272, 0, 4096] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:2: [0, 4249530368, 0, 4096] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:3: [0, 4249534464, 0, 4096] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml Cc: Hyun Kwon Cc: Laurent Pinchart Cc: Vinod Koul Cc: dri-devel@lists.freedesktop.org Cc: dmaengine@vger.kernel.org Acked-by: Michal Simek Signed-off-by: Rob Herring

Merge tag 'gpio-fixes-for-v5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes

2020-09-29T11:40:37Z

gpio: fixes for v5.9-rc7 - fix uninitialized variable in gpio-pca953x - enable all 160 lines and fix interrupt configuration in gpio-aspeed-gpio - fix ast2600 bank properties in gpio-aspeed

ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd

2020-09-28T12:55:12Z

The current binding for the RPi firmware uses the simple-bus compatible as a fallback to benefit from its automatic probing of child nodes. However, simple-bus also comes with some constraints, like having the ranges, our case. Let's switch to simple-mfd that provides the same probing logic without those constraints. Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech Signed-off-by: Rob Herring