pm24.git/arch/arm/boot/dts/aspeed, branch master

Merge tag 'aspeed-6.12-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt

2024-09-11T08:41:18Z

ASPEED device tree updates for 6.12 - New machines * IBM P11 AST2600 BMC machines, named Blueridge and Fuji * Meta's Catalina AST2600 BMC - Updates to harma, minerva, mtmitchell, mtjade, system1, SPC621D8HM3 - Various changes to the dtsi to keep the YAML checker happy * tag 'aspeed-6.12-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (52 commits) ARM: dts: aspeed: catalina: Update io expander line names ARM: dts: aspeed: catalina: Add pdb cpld io expander ARM: dts: aspeed: harma: Remove pca9546 ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warnings ARM: dts: aspeed: harma: Enable mctp controller ARM: dts: aspeed: harma: Add temperature device ARM: dts: aspeed: harma: Add fru device ARM: dts: aspeed: harma: Remove multi-host property ARM: dts: aspeed: harma: Add power monitor xdp710 ARM: dts: aspeed: harma: Add ina238 ARM: dts: aspeed: harma: Add sgpio name ARM: dts: aspeed: harma: Add VR devices ARM: dts: aspeed: harma: Revise hsc chip ARM: dts: aspeed-g6: Drop cells properties from ethernet nodes ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodes ARM: dts: aspeed: Clean up AST2500 pinctrl properties ARM: dts: aspeed: Remove undocumented XDMA nodes ARM: dts: aspeed: Specify required properties for sram node ARM: dts: aspeed: Specify correct generic compatible for CVIC ARM: dts: aspeed: Fix coprocessor interrupt controller node name ... Link: https://lore.kernel.org/r/CACPK8XeGDUrbJ-OaxqQBR=aVVYyrKGnvT1ZKXO0vPHpsjQ_i9g@mail.gmail.com Signed-off-by: Arnd Bergmann

ARM: dts: Fix undocumented LM75 compatible nodes

2024-09-05T14:37:43Z

"lm75" without any vendor is undocumented. It works with the Linux kernel since the I2C subsystem will do matches of the compatible string without a vendor prefix to the i2c_device_id and/or driver name. Mostly replace "lm75" with "national,lm75" as that's the original part vendor and the compatible which matches what "lm75" matched with. In a couple of cases the node name or compatible gives a clue to the actual part and vendor and a more specific compatible can be used. In these cases, it does change the variant the kernel picks. "nct75" is an OnSemi part which is compatible with TI TMP75C based on a comparison of the OnSemi NCT75 datasheet and configuration the Linux driver uses. Adding an OnSemi compatible would be an ABI change. "nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53 boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are 11-bit resolution and 100ms sample time. The "national,lm75a" is 9-bit, so "national,lm75b" is the closest match for both NXP variants. While we're here, fix the node names to use the generic name "temperature-sensor". Reviewed-by: Krzysztof Kozlowski Reviewed-by: Kevin Hilman # am335x-nano.dts Signed-off-by: Rob Herring (Arm) Reviewed-by: Alexander Stein # imx53-mba53.dts, imx53-tqma53.dtsi Link: https://lore.kernel.org/r/20240816164717.1585629-1-robh@kernel.org Signed-off-by: Arnd Bergmann

ARM: dts: aspeed: catalina: Update io expander line names

2024-08-27T03:30:49Z

io_expander7 - P1-5: MCU_GPIO - P1-6: MCU_RST_N - P1-7: MCU_RECOVERY_N io_expander8 - P1-5: SEC_MCU_GPIO - P1-6: SEC_MCU_RST_N - P1-7: SEC_MCU_RECOVERY_N Signed-off-by: Potin Lai Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-2-4bfd8dad819c@gmail.com Signed-off-by: Andrew Jeffery Signed-off-by: Joel Stanley

ARM: dts: aspeed: catalina: Add pdb cpld io expander

2024-08-27T03:30:34Z

Add more IO expanders which are emulated by the PDB CPLD. Signed-off-by: Potin Lai Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-1-4bfd8dad819c@gmail.com Signed-off-by: Andrew Jeffery Signed-off-by: Joel Stanley

ARM: dts: aspeed: harma: Remove pca9546

2024-08-22T03:39:43Z

Remove pca9546 device from i2c bus 9. Signed-off-by: Peter Yin Link: https://lore.kernel.org/r/20240801160136.1281291-12-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery Signed-off-by: Joel Stanley

ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warnings

2024-08-22T03:39:43Z

Revise spi-gpio node and property name and remove max-ngpios. Signed-off-by: Peter Yin Link: https://lore.kernel.org/r/20240801160136.1281291-11-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery Signed-off-by: Joel Stanley

ARM: dts: aspeed: harma: Enable mctp controller

2024-08-22T03:39:43Z

Enable the mctp controller in i2c9. Signed-off-by: Peter Yin Link: https://lore.kernel.org/r/20240801160136.1281291-10-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery Signed-off-by: Joel Stanley

ARM: dts: aspeed: harma: Add temperature device

2024-08-22T03:39:43Z

Add temperature device in i2c0 and i2c2. Signed-off-by: Peter Yin Link: https://lore.kernel.org/r/20240801160136.1281291-9-peteryin.openbmc@gmail.com [andrew: Fixed 'deivce' typo in commit message] Signed-off-by: Andrew Jeffery Signed-off-by: Joel Stanley

ARM: dts: aspeed: harma: Add fru device

2024-08-22T03:39:43Z

Add Aegis fru device and gpio expander device in bus 11. Signed-off-by: Peter Yin Link: https://lore.kernel.org/r/20240801160136.1281291-8-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery Signed-off-by: Joel Stanley

ARM: dts: aspeed: harma: Remove multi-host property

2024-08-22T03:39:42Z

Harma is single host, so remove multi-host property. Signed-off-by: Peter Yin Link: https://lore.kernel.org/r/20240801160136.1281291-7-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery Signed-off-by: Joel Stanley