pm24.git/arch/arm/mach-exynos, branch master

Merge tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-06-29T22:28:33Z

Pull ARM SoC updates from Arnd Bergmann: "These are mostly minor cleanups and bugfixes that address harmless problems. The largest branch is a conversion of the omap platform to use GPIO descriptors throughout the tree, for any devices that are not fully converted to devicetree. The Samsung Exynos platform gains back support for the Exynos4212 chip that was previously unused and removed but is now used for the Samsung Galaxy Tab3" * tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) ARM: omap2: Fix copy/paste bug MAINTAINERS: Replace my email address Input: ads7846 - fix pointer cast warning Input: ads7846 - Fix usage of match data ARM: omap2: Fix checkpatch issues arm: omap1: replace printk() with pr_err macro ARM: omap: Fix checkpatch issues ARM: s3c: Switch i2c drivers back to use .probe() ARM: versatile: mark mmc_status() static ARM: spear: include "pl080.h" for pl080_get_signal() prototype ARM: sa1100: address missing prototype warnings ARM: pxa: fix missing-prototypes warnings ARM: orion5x: fix d2net gpio initialization ARM: omap2: fix missing tick_broadcast() prototype ARM: omap1: add missing include ARM: lpc32xx: add missing include ARM: imx: add missing include ARM: highbank: add missing include ARM: ep93xx: fix missing-prototype warnings ARM: davinci: fix davinci_cpufreq_init() declaration ...

arm: update in-source documentation references

2023-06-12T12:33:48Z

The Arm documentation has moved to Documentation/arch/arm; update references within arch/arm to match. Cc: Russell King Cc: Alim Akhtar Cc: Patrice Chotard Cc: linux-doc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Signed-off-by: Jonathan Corbet

ARM: exynos: Re-introduce Exynos4212 support

2023-05-09T17:44:30Z

Support for the Exynos4212 SoC was originally dropped as there were no boards using it. We will be adding a device that uses it, so add back the relevant code. This reverts commit 9e43eca3c87476f75680f472ff3ebcd85f357b86. Signed-off-by: Artur Weber Link: https://lore.kernel.org/r/20230501195525.6268-4-aweber.kernel@gmail.com Signed-off-by: Krzysztof Kozlowski

ARM: EXYNOS: Use of_address_to_resource()

2023-03-22T17:47:01Z

Replace of_get_address() and of_translate_address() with single call to of_address_to_resource(). With this, use ioremap() instead of of_iomap() which would parse "reg" a second time. Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20230319163145.225323-1-robh@kernel.org Signed-off-by: Krzysztof Kozlowski

ARM: exynos: Use of_property_read_bool() for boolean properties

2023-03-13T06:55:26Z

It is preferred to use typed property access functions (i.e. of_property_read_ functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20230310144655.1540655-1-robh@kernel.org Signed-off-by: Krzysztof Kozlowski

ARM: exynos: Fix refcount leak in exynos_map_pmu

2022-06-06T08:40:57Z

of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer. Fixes: fce9e5bb2526 ("ARM: EXYNOS: Add support for mapping PMU base address via DT") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220523145513.12341-1-linmq006@gmail.com Signed-off-by: Krzysztof Kozlowski

Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-05-26T17:43:09Z

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...

pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config

2022-04-21T06:58:54Z

The Samsung pinctrl drivers depend on OF_GPIO, which is part of GPIOLIB. ARMv7 Exynos platform selects GPIOLIB and Samsung pinctrl drivers. ARMv8 Exynos selects only the latter leading to possible wrong configuration on ARMv8 build: WARNING: unmet direct dependencies detected for PINCTRL_EXYNOS Depends on [n]: PINCTRL [=y] && OF_GPIO [=n] && (ARCH_EXYNOS [=y] || ARCH_S5PV210 || COMPILE_TEST [=y]) Selected by [y]: - ARCH_EXYNOS [=y] Always select the GPIOLIB from the Samsung pinctrl drivers to fix the issue. This requires removing of OF_GPIO dependency (to avoid recursive dependency), so add dependency on OF for COMPILE_TEST cases. Reported-by: Necip Fazil Yildiran Fixes: eed6b3eb20b9 ("arm64: Split out platform options to separate Kconfig") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20220420141407.470955-1-krzysztof.kozlowski@linaro.org

ARM: rework endianess selection

2022-04-08T15:20:54Z

Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann

Merge tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-03-24T01:20:09Z

Pull ARM SoC updates from Arnd Bergmann: "SoC specific code is generally used for older platforms that don't (yet) use device tree to do the same things. - Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller from NXP. At the moment this is still incomplete as other portions are merged through different trees. - Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms gets removed, now the Arm NOMMU platforms are limited to the Cortex-M family of microcontrollers - Two old PXA boards get removed, along with corresponding driver bits. - Continued cleanup of the Intel IXP4xx platforms, removing some remnants of the old board files. - Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung - CPU idle support for AT91 - A system controller driver for Polarfire" * tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: remove support for NOMMU ARMv4/v5 ARM: PXA: fix up decompressor code soc: microchip: make mpfs_sys_controller_put static ARM: pxa: remove Intel Imote2 and Stargate 2 boards ARM: mmp: Fix failure to remove sram device ARM: mstar: Select ARM_ERRATA_814220 soc: add microchip polarfire soc system controller ARM: at91: Kconfig: select PM_OPP ARM: at91: PM: add cpu idle support for sama7g5 ARM: at91: ddr: fix typo to align with datasheet naming ARM: at91: ddr: align macro definitions ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency ARM: ixp4xx: Convert to SPARSE_IRQ and P2V ARM: ixp4xx: Drop all common code ARM: ixp4xx: Drop custom DMA coherency and bouncing ARM: ixp4xx: Remove feature bit accessors net: ixp4xx_hss: Check features using syscon net: ixp4xx_eth: Drop platform data support soc: ixp4xx-npe: Access syscon regs using regmap soc: ixp4xx: Add features from regmap helper ...