pm24.git/arch/arm64/boot, branch cpufreq-rust

Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-01-24T22:48:03Z

Pull SoC devicetree updates from Arnd Bergmann: "We see the addition of eleven new SoCs, including a total of sixx arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once again make up the majority of all changes, after a couple of quieter releases. The new SoCs in this branch are: - Microchip sama7d65 is a new 32-bit embedded chip with a single Cortex-A7 and the current high end of the old Atmel SoC line. - Samsung Exynos 9810 is a mobile phone chip used in some older phones like the Samsung Galaxy S9 - Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H (R8A779G0) low-power automotive SoC - Renesas RZ/G3E (R0A09G047) is a family of embedded chips using Cortex-A55 cores - Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on Qualcomm's Oryon CPU cores. - Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality glasses. - Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT platforms. - Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016 - Qualcomm IPQ5424 is a Wi-Fi 7 networking chip All of the above are part of already supported SoC families that only need new devicetree files. Two additional SoCs in new families are part of a separate branch. There are 48 new machines in total, including six arm32 ones based on aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and a single risc-v board, the Banana Pi R3. The remaining ones use arm64 chips from Broadcom, Samsung, NXP, Mediatek, Qualcomm, Renesas and Rockchips and cover development boards, phones, laptops, industrial machines routers. A lot of ongoing work is for cleaning up build time warnings and other issues, in addition to the new machines and added features" * tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits) arm64: tegra: Fix Tegra234 PCIe interrupt-map arm64: dts: qcom: x1e80100-romulus: Update firmware nodes arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM dt-bindings: arm: rockchip: Add Firefly ITX-3588J board arm64: dts: rockchip: Add Orange Pi 5 Max board dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi arm64: dts: rockchip: add WLAN to rk3588-evb1 controller arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes arm64: tegra: Disable Tegra234 sce-fabric node arm64: tegra: Fix typo in Tegra234 dce-fabric compatible arm64: tegra: Fix DMA ID for SPI2 arm64: dts: qcom: msm8916-samsung-serranove: Add display panel arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: Remove unused and undocumented properties arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes arm64: dts: qcom: pmi8950: add LAB-IBB nodes arm64: dts: qcom: ipq5424: enable the download mode support ...

Merge tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-01-24T22:31:06Z

Pull new SoC support from Arnd Bergmann: "Two new SoC families are added here, with devicetree files and a little bit of infrastructure to allow booting: - Blaize BLZP1600 is an AI chip using custom GSP (Graph Streaming Processor) cores for computation, and two small Cortex-A53 cores that run the operating system. - SpacemiT K1 is a 64-bit RISC-V chip, using eight custom RVA22 compatible CPU cores with vector support. Also marketed at AI applications, it has a much slower NPU compared to BLZP1600, but in turn focuses on the CPU performance" * tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: riscv: dts: spacemit: move aliases to board dts riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3 riscv: defconfig: enable SpacemiT SoC riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree riscv: dts: add initial SpacemiT K1 SoC device tree riscv: add SpacemiT SoC family Kconfig support dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC dt-bindings: timer: Add SpacemiT K1 CLINT dt-bindings: riscv: add SpacemiT K1 bindings dt-bindings: riscv: Add SpacemiT X60 compatibles MAINTAINERS: setup support for SpacemiT SoC tree MAINTAINER: Add entry for Blaize SoC arm64: defconfig: Enable Blaize BLZP1600 platform arm64: dts: Add initial support for Blaize BLZP1600 CB2 arm64: Add Blaize BLZP1600 SoC family dt-bindings: arm: blaize: Add Blaize BLZP1600 SoC dt-bindings: Add Blaize vendor prefix

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2025-01-22T18:54:18Z

Pull clk updates from Stephen Boyd: "A pretty quiet cycle this time around. We have a bunch of new Qualcomm clk drivers, per usual, and then a handful of drivers for other SoCs. Then the usual pile of cleanups is fairly small data fixes or converting DT bindings to YAML so they can be validated. No changes to the core framework besides an OF node refcount bump that never got decremented. New Drivers: - 5L35023 variant of Versa 3 clock generator - Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750 global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh and MSM8937 and MSM8940 RPM. - Qualcomm Pongo and Taycan Alpha PLLs - Qualcomm IPQ5424 NoC-related interconnect clks - Renesas RZ/G3E (R9A09G047) SoC clk driver - SAMA7D65 SoC clk driver - Samsung Exynos990 SoC clk driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits) clk: analogbits: Fix incorrect calculation of vco rate delta clk: bcm: rpi: Add disp clock clk: bcm: rpi: Create helper to retrieve private data clk: bcm: rpi: Enable minimize for all firmware clocks clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks clk: bcm: rpi: Add ISP to exported clocks clk: stm32f4: support spread spectrum clock generation clk: stm32f4: use FIELD helpers to access the PLLCFGR fields dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking dt-bindings: clock: convert stm32 rcc bindings to json-schema clk: Use str_enable_disable-like helpers clk: clk-loongson2: Fix the number count of clk provider clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data() clk: starfive: Make _clk_get become a common helper function clk: en7523: Add clock for eMMC for EN7581 dt-bindings: clock: add ID for eMMC for EN7581 dt-bindings: clock: drop NUM_CLOCKS define for EN7581 clk: en7523: Rework clock handling for different clock numbers clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot ...

Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel

2025-01-22T00:09:47Z

Pull drm updates from Dave Airlie: "There are two external interactions of note, the msm tree pull in some opp tree, hopefully the opp tree arrives from the same git tree however it normally does. There is also a new cgroup controller for device memory, that is used by drm, so is merging through my tree. This will hopefully help open up gpu cgroup usage a bit more and move us forward. There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs. Then the usual xe/amdgpu/i915/msm leaders and lots of changes and refactors across the board: core: - device memory cgroup controller added - Remove driver date from drm_driver - Add drm_printer based hex dumper - drm memory stats docs update - scheduler documentation improvements new driver: - amdxdna - Ryzen AI NPU support connector: - add a mutex to protect ELD - make connector setup two-step panels: - Introduce backlight quirks infrastructure - New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00, - Multi-Inno Technology MI1010Z1T-1CP11 bridge: - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties - Provide default implementation of atomic_check for HDMI bridges - it605: HDCP improvements, MCCS Support xe: - make OA buffer size configurable - GuC capture fixes - add ufence and g2h flushes - restore system memory GGTT mappings - ioctl fixes - SRIOV PF scheduling priority - allow fault injection - lots of improvements/refactors - Enable GuC's WA_DUAL_QUEUE for newer platforms - IRQ related fixes and improvements i915: - More accurate engine busyness metrics with GuC submission - Ensure partial BO segment offset never exceeds allowed max - Flush GuC CT receive tasklet during reset preparation - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs - Fix DG1 power gate sequence - Enabling uncompressed 128b/132b UHBR SST - Handle hdmi connector init failures, and no HDMI/DP cases - More robust engine resets on Haswell and older i915/xe display: - HDCP fixes for Xe3Lpd - New GSC FW ARL-H/ARL-U - support 3 VDSC engines 12 slices - MBUS joining sanitisation - reconcile i915/xe display power mgmt - Xe3Lpd fixes - UHBR rates for Thunderbolt amdgpu: - DRM panic support - track BO memory stats at runtime - Fix max surface handling in DC - Cleaner shader support for gfx10.3 dGPUs - fix drm buddy trim handling - SDMA engine reset updates - Fix doorbell ttm cleanup - RAS updates - ISP updates - SDMA queue reset support - Rework DPM powergating interfaces - Documentation updates and cleanups - DCN 3.5 updates - Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate - Add debugfs interfaces for forcing scheduling to specific engine instances - GG 9.5 updates - IH 4.4 updates - Make missing optional firmware less noisy - PSP 13.x updates - SMU 13.x updates - VCN 5.x updates - JPEG 5.x updates - GC 12.x updates - DC FAMS updates amdkfd: - GG 9.5 updates - Logging improvements - Shader debugger fixes - Trap handler cleanup - Cleanup includes - Eviction fence wq fix msm: - MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support - DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - added CWB hardware blocks support - DSI: - added SM6150 (aka QCS615) support - GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting rcar-du: - Add r8a779h0 Support ivpu: - Fix qemu crash when using passthrough nouveau: - expose GSP-RM logging buffers via debugfs panfrost: - Add MT8188 Mali-G57 MC3 support rockchip: - Gamma LUT support hisilicon: - new HIBMC support virtio-gpu: - convert to helpers - add prime support for scanout buffers v3d: - Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL vc4: - Add support for BCM2712 vkms: - line-per-line compositing algorithm to improve performance zynqmp: - Add DP audio support mediatek: - dp: Add sdp path reset - dp: Support flexible length of DP calibration data etnaviv: - add fdinfo memory support - add explicit reset handling" * tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits) drm/bridge: fix documentation for the hdmi_audio_prepare() callback doc/cgroup: Fix title underline length drm/doc: Include new drm-compute documentation cgroup/dmem: Fix parameters documentation cgroup/dmem: Select PAGE_COUNTER kernel/cgroup: Remove the unused variable climit drm/display: hdmi: Do not read EDID on disconnected connectors drm/tests: hdmi: Add connector disablement test drm/connector: hdmi: Do atomic check when necessary drm/amd/display: 3.2.316 drm/amd/display: avoid reset DTBCLK at clock init drm/amd/display: improve dpia pre-train drm/amd/display: Apply DML21 Patches drm/amd/display: Use HW lock mgr for PSR1 drm/amd/display: Revised for Replay Pseudo vblank control drm/amd/display: Add a new flag for replay low hz drm/amd/display: Remove unused read_ono_state function from Hwss module drm/amd/display: Do not elevate mem_type change to full update drm/amd/display: Do not wait for PSR disable on vbl enable drm/amd/display: Remove unnecessary eDP power down ...

Merge tag 'mvebu-dt64-6.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt

2025-01-16T15:37:53Z

mvebu dt64 for 6.14 (part 1) Fix errors reported by dtbs_check for sata related nodes Fix cp1 comphy link on Marvell CN913x platforms * tag 'mvebu-dt64-6.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: drop additional phy-names for sata arm64: dts: marvell: only enable complete sata nodes arm64: dts: marvell: cn9131-cf-solidwan: fix cp1 comphy links Link: https://lore.kernel.org/r/87frlnygej.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann

Merge tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

2025-01-16T14:31:33Z

Qualcomm Arm64 DeviceTree updates for v6.14 This adds support for the new Snapdragon 8 Elite platform with MTP and QRD boards, QCS615 platform with the Ride board, QCS8300 platform with its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2 Gen1 Smart Viewer Development Kit. On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added. The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit 2023 are introduced. IPQ9574 gains PCIe and TRNG descriptions, together with a few other smaller improvements. TRNG is also enabled on the IPQ5332 platform. On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB interrupts are corrected. On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development kit gains description of the onboard LEDs. On QRB4210 RB2 support for HDMI audio playback is added. SA8775P gains missing clock controllers, CPUs are tied to PSCI power domains, DisplayPort is introduced and enabled on the Ride board. On SDM670 the GPU components are described and enabled for Google Pixel 3a, together with camera clock controller and flash LED. Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled. "global" IRQ for PCIe RC controllers are described on SM8550 and SM8650, to allow for hotplug events. Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615, and QCS8300. The X Elite platform gains QUP power domains and OPPs, another PCIe controller, another UART, and its SDHCI controllers. The ASUS Vivobook S 15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains audio configuration, SD card reader support, and USB retimers. The Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains retimers described. The Lenovo Thinkpad T14s has additional USB ports enabled, as well as sound and fingerprint sensor. USB U1/U2 entry is disabled across a variety of platforms, to improve USB stability. sleep clock frequencies are reviewed and corrected for a variety of platforms, so is also various remoteproc mmio address ranges. * tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (240 commits) arm64: dts: qcom: x1e80100-romulus: Update firmware nodes arm64: dts: qcom: msm8916-samsung-serranove: Add display panel arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: Remove unused and undocumented properties arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes arm64: dts: qcom: pmi8950: add LAB-IBB nodes arm64: dts: qcom: ipq5424: enable the download mode support arm64: dts: qcom: ipq5424: add scm node arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts arm64: dts: qcom: qcs8300-ride: Enable USB controllers arm64: dts: qcom: qcs8300: Add support for usb nodes arm64: dts: qcom: qcs8300: Add support for clock controllers arm64: dts: qcom: sm8450: Add coresight nodes arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions arm64: dts: qcom: qcs615-ride: Enable UFS node arm64: dts: qcom: qcs615: add UFS node arm64: dts: qcom: ipq5424: Add USB controller and phy nodes ... Link: https://lore.kernel.org/r/20250111181025.394631-1-andersson@kernel.org Signed-off-by: Arnd Bergmann

Merge tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

2025-01-16T14:29:03Z

New boards rk3576-evb1, H96 Max V58 TV Box (rk3588), BigTreeTech CB2 (SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM), Orange Pi 5 Max. A interesting case is the Radxa E52C using a soc called rk3582. This is rk3588-variant where some cpu cores are disabled during production and the bootloader needs to read the available cores from efuses and adapt the DT it hands over to the kernel. New supported peripherals are just the naneng combophy + the usb controllers using them on the rk3576 as well as the arm,smmu attached to the PCI controller on rk3588. And finally there are of course a number of board-specific enablements and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi 5+ etc. * tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits) arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM dt-bindings: arm: rockchip: Add Firefly ITX-3588J board arm64: dts: rockchip: Add Orange Pi 5 Max board dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi arm64: dts: rockchip: add WLAN to rk3588-evb1 controller arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes arm64: dts: rockchip: enable hdmi out audio on wolfvision pf5 arm64: dts: rockchip: fix num-channels property of wolfvision pf5 mic arm64: dts: rockchip: Enable the USB 3.0 port on NanoPi R6C/R6S arm64: dts: rockchip: Add FRAM MB85RS128TY to rk3568-mecsbc arm64: dts: rockchip: Remove unused i2c2 node from rk3568-mecsbc arm64: dts: rockchip: Fix PCIe3 handling for Edgeble-6TOPS Modules arm64: dts: rockchip: Add Radxa E52C dt-bindings: arm: rockchip: Add Radxa E52C arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2 dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2 arm64: dts: rockchip: Enable USB 3.0 ports on orangepi-5-plus arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC ... Link: https://lore.kernel.org/r/2193001.3Lj2Plt8kZ@diego Signed-off-by: Arnd Bergmann

Merge tag 'ti-k3-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

2025-01-16T14:28:06Z

TI K3 device tree updates for v6.14 Generic Fixups/Cleanups: - Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties for ethernet phy - Clock description added to ICSS-G SoC Specific features and Fixes: - Duplicate GICR reg defines in am62x/am62ax - Mailbox nodes are enabled at board level bringing AM67/j722s/am62p to same behavior as other K3 SoCs. - Introduction of deep-sleep state defines for pinctrl header AM62Ax - Enable ti-sysc for wkup_uart0 AM64: - Switch ICSSG clock to core clock. J7200: - Disable SPI1 loopback default. J784s4: - Clock ID fix for McSPI instances - Use j7200-padconf compatibility for padconf to enable suspend-to-ram support. Board Specific: AM62 - phyboard - hdmi bridge regulator and using 16bit input for hdmi bridge, vcc-supply for i2c eeprom - SK - SoC wakeup using USB1, Add bootph property around cpsw mac syscon node, M4 mailbox node redefinition fixup. - BeaglePlay: Fix ethernet phy reset time AM64 - hummingboard-t: Convert PCIE/USB overlays to independent dts. j7200: - EVM: fix typo in overlay name. j721e: - EVM: overlay for pcie1 endpoint mode. j722s: - EVM: Add mcu_i2c0 support for expansion pins., Add USB0 DFU support, Enable PMIC - AM67a-beagley-ai: Add remote proc nodes j784s4: - AM69-SK/ j784s4-EVM - Mark PMIC regulators with bootph-all property to indicate ones that are needed through boot phases. - AM69-sk: PIC0 Endpoint mode overlay, USB Superspeed mode. * tag 'ti-k3-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (31 commits) arm64: dts: ti: k3-am62a-wakeup: Configure ti-sysc for wkup_uart0 arm64: dts: ti: k3-j722s-evm: Enable PMIC arm64: dts: ti: k3-am69-sk: Add USB SuperSpeed support arm64: dts: ti: k3-am625-beagleplay: Fix DP83TD510E reset time arm64: dts: ti: k3-am642-hummingboard-t: Convert overlay to board dts arm64: dts: ti: k3-am69-sk: Add overlay for PCIE0 Endpoint Mode arm64: dts: ti: k3-am68-sk-base-board: Add overlay for PCIE1 Endpoint Mode arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE1 Endpoint Mode arm64: dts: ti: Makefile: Fix typo "k3-j7200-evm-pcie1-ep.dtbo" arm64: dts: ti: k3-j7200: Add node to disable loopback connection arm64: dts: ti: k3-j784s4: Use ti,j7200-padconf compatible arm64: dts: ti: k3-am62p-j722s-common-main: Enable USB0 for DFU boot arm64: dts: ti: k3-am62a: Remove duplicate GICR reg arm64: dts: ti: k3-am62: Remove duplicate GICR reg arm64: dts: ti: k3-am67a-beagley-ai: Add remote processor nodes arm64: dts: ti: k3-am62p: Enable Mailbox nodes at the board level arm64: dts: ti: k3-am625-sk: Remove M4 mailbox node redefinition arm64: dts: ti: k3-j722s-evm: Enable support for mcu_i2c0 arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node arm64: dts: ti: Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties ... Link: https://lore.kernel.org/r/20250110210812.bdpypzvmg6s6sr5t@itinerary Signed-off-by: Arnd Bergmann

Merge tag 'tegra-for-6.14-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

2025-01-16T14:16:41Z

arm64: tegra: Device tree fixes for v6.14-rc1 These patches fix up an issue with the DMA support on one of the SPI controllers, as well as properly identify the SCE fabric and disable it to prevent accessing registers that may not be accessible to the CPU. Finally, the GIC's #address-cells property is set to 0 to fix a problem in the PCIe interrupt-map property. * tag 'tegra-for-6.14-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Fix Tegra234 PCIe interrupt-map arm64: tegra: Disable Tegra234 sce-fabric node arm64: tegra: Fix typo in Tegra234 dce-fabric compatible arm64: tegra: Fix DMA ID for SPI2 Link: https://lore.kernel.org/r/20250110185355.4143505-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann

Merge tag 'arm-soc/for-6.14/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt

2025-01-16T14:10:03Z

This pull request contains Broadcom ARM64-based SoCs Device Tree updates for 6.14: - Dave adds the display pipeline DT nodes on BCM2712 (Raspberry Pi 5) - Rob removes some undocumented properties - Same ensures that the CFE stub area is reserved to allow secondary CPUs to be successfully brought up in Linux, also making sure that the address used in the spin table is also carved out. Finally he adds support for the Zyxel EX3510-B router using BCM4906 - Rosen converts the BCM4908 platforms to use the more flexible nvmem-layout representation * tag 'arm-soc/for-6.14/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: bcm4908: nvmem-layout conversion arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906 arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area arm64: dts: broadcom: Remove unused and undocumented properties arm64: dts: broadcom: Add DT for D-step version of BCM2712 arm64: dts: broadcom: Add display pipeline support to BCM2712 arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT Link: https://lore.kernel.org/r/20250109224756.3632025-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann