pm24.git/arch/arm64/kernel, branch master

arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS

2024-12-05T18:05:51Z

Currently gcs_set() doesn't initialize the temporary 'user_gcs' variable, and a SETREGSET call with a length of 0, 8, or 16 will leave some portion of this uninitialized. Consequently some arbitrary uninitialized values may be written back to the relevant fields in task struct, potentially leaking up to 192 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. As gcs_set() rejects cases where user_gcs::features_enabled has bits set other than PR_SHADOW_STACK_SUPPORTED_STATUS_MASK, a SETREGSET call with a length of zero will randomly succeed or fail depending on the value of the uninitialized value, it isn't possible to leak the full 192 bits. With a length of 8 or 16, user_gcs::features_enabled can be initialized to an accepted value, making it practical to leak 128 or 64 bits. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length or partial write, the existing contents of the fields which are not written to will be retained. To ensure that the extraction and insertion of fields is consistent across the GETREGSET and SETREGSET calls, new task_gcs_to_user() and task_gcs_from_user() helpers are added, matching the style of pac_address_keys_to_user() and pac_address_keys_from_user(). Before this patch: | # ./gcs-test | Attempting to write NT_ARM_GCS::user_gcs = { | .features_enabled = 0x0000000000000000, | .features_locked = 0x0000000000000000, | .gcspr_el0 = 0x900d900d900d900d, | } | SETREGSET(nt=0x410, len=24) wrote 24 bytes | | Attempting to read NT_ARM_GCS::user_gcs | GETREGSET(nt=0x410, len=24) read 24 bytes | Read NT_ARM_GCS::user_gcs = { | .features_enabled = 0x0000000000000000, | .features_locked = 0x0000000000000000, | .gcspr_el0 = 0x900d900d900d900d, | } | | Attempting partial write NT_ARM_GCS::user_gcs = { | .features_enabled = 0x0000000000000000, | .features_locked = 0x1de7ec7edbadc0de, | .gcspr_el0 = 0x1de7ec7edbadc0de, | } | SETREGSET(nt=0x410, len=8) wrote 8 bytes | | Attempting to read NT_ARM_GCS::user_gcs | GETREGSET(nt=0x410, len=24) read 24 bytes | Read NT_ARM_GCS::user_gcs = { | .features_enabled = 0x0000000000000000, | .features_locked = 0x000000000093e780, | .gcspr_el0 = 0xffff800083a63d50, | } After this patch: | # ./gcs-test | Attempting to write NT_ARM_GCS::user_gcs = { | .features_enabled = 0x0000000000000000, | .features_locked = 0x0000000000000000, | .gcspr_el0 = 0x900d900d900d900d, | } | SETREGSET(nt=0x410, len=24) wrote 24 bytes | | Attempting to read NT_ARM_GCS::user_gcs | GETREGSET(nt=0x410, len=24) read 24 bytes | Read NT_ARM_GCS::user_gcs = { | .features_enabled = 0x0000000000000000, | .features_locked = 0x0000000000000000, | .gcspr_el0 = 0x900d900d900d900d, | } | | Attempting partial write NT_ARM_GCS::user_gcs = { | .features_enabled = 0x0000000000000000, | .features_locked = 0x1de7ec7edbadc0de, | .gcspr_el0 = 0x1de7ec7edbadc0de, | } | SETREGSET(nt=0x410, len=8) wrote 8 bytes | | Attempting to read NT_ARM_GCS::user_gcs | GETREGSET(nt=0x410, len=24) read 24 bytes | Read NT_ARM_GCS::user_gcs = { | .features_enabled = 0x0000000000000000, | .features_locked = 0x0000000000000000, | .gcspr_el0 = 0x900d900d900d900d, | } Fixes: 7ec3b57cb29f ("arm64/ptrace: Expose GCS via ptrace and core files") Signed-off-by: Mark Rutland Cc: Mark Brown Cc: Will Deacon Reviewed-by: Mark Brown Link: https://lore.kernel.org/r/20241205121655.1824269-5-mark.rutland@arm.com Signed-off-by: Catalin Marinas

arm64: ptrace: fix partial SETREGSET for NT_ARM_POE

2024-12-05T18:05:33Z

Currently poe_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.por_el0, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of POR_EL1 will be retained. Before this patch: | # ./poe-test | Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d | SETREGSET(nt=0x40f, len=8) wrote 8 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | | Attempting to write NT_ARM_POE (zero length) | SETREGSET(nt=0x40f, len=0) wrote 0 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50 After this patch: | # ./poe-test | Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d | SETREGSET(nt=0x40f, len=8) wrote 8 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | | Attempting to write NT_ARM_POE (zero length) | SETREGSET(nt=0x40f, len=0) wrote 0 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d Fixes: 175198199262 ("arm64/ptrace: add support for FEAT_POE") Cc: # 6.12.x Signed-off-by: Mark Rutland Cc: Joey Gouly Cc: Will Deacon Reviewed-by: Mark Brown Link: https://lore.kernel.org/r/20241205121655.1824269-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas

arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR

2024-12-05T18:04:06Z

Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of FPMR will be retained. Before this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0xffff800083963d50 After this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d Fixes: 4035c22ef7d4 ("arm64/ptrace: Expose FPMR via ptrace") Cc: # 6.9.x Signed-off-by: Mark Rutland Cc: Mark Brown Cc: Will Deacon Reviewed-by: Mark Brown Link: https://lore.kernel.org/r/20241205121655.1824269-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas

arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL

2024-12-05T18:03:25Z

Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently tagged_addr_ctrl_set() will consume an arbitrary value, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and rejects other values, a partial SETREGSET attempt will randomly succeed or fail depending on the value of the uninitialized value, and the exposure is significantly limited. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing value of the tagged address ctrl will be retained. The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the user_aarch64_view used by a native AArch64 task to manipulate another native AArch64 task. As get_tagged_addr_ctrl() only returns an error value when called for a compat task, tagged_addr_ctrl_get() and tagged_addr_ctrl_set() should never observe an error value from get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that such an error would be unexpected, and error handlnig is not missing in either case. Fixes: 2200aa7154cb ("arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset") Cc: # 5.10.x Signed-off-by: Mark Rutland Cc: Will Deacon Reviewed-by: Mark Brown Link: https://lore.kernel.org/r/20241205121655.1824269-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas

arm64: patching: avoid early page_to_phys()

2024-12-03T18:05:42Z

When arm64 is configured with CONFIG_DEBUG_VIRTUAL=y, a warning is printed from the patching code because patch_map(), e.g. | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/patching.c:45 patch_map.constprop.0+0x120/0xd00 | CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.13.0-rc1-00002-ge1a5d6c6be55 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 800003c5 (Nzcv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : patch_map.constprop.0+0x120/0xd00 | lr : patch_map.constprop.0+0x120/0xd00 | sp : ffffa9bb312a79a0 | x29: ffffa9bb312a79a0 x28: 0000000000000001 x27: 0000000000000001 | x26: 0000000000000000 x25: 0000000000000000 x24: 00000000000402e8 | x23: ffffa9bb2c94c1c8 x22: ffffa9bb2c94c000 x21: ffffa9bb222e883c | x20: 0000000000000002 x19: ffffc1ffc100ba40 x18: ffffa9bb2cf0f21c | x17: 0000000000000006 x16: 0000000000000000 x15: 0000000000000004 | x14: 1ffff5376625b4ac x13: ffff753766a67fb8 x12: ffff753766919cd1 | x11: 0000000000000003 x10: 1ffff5376625b4c3 x9 : 1ffff5376625b4af | x8 : ffff753766254f0a x7 : 0000000041b58ab3 x6 : ffff753766254f18 | x5 : ffffa9bb312d9bc0 x4 : 0000000000000000 x3 : ffffa9bb29bd90e4 | x2 : 0000000000000002 x1 : ffffa9bb312d9bc0 x0 : 0000000000000000 | Call trace: | patch_map.constprop.0+0x120/0xd00 (P) | patch_map.constprop.0+0x120/0xd00 (L) | __aarch64_insn_write+0xa8/0x120 | aarch64_insn_patch_text_nosync+0x4c/0xb8 | arch_jump_label_transform_queue+0x7c/0x100 | jump_label_update+0x154/0x460 | static_key_enable_cpuslocked+0x1d8/0x280 | static_key_enable+0x2c/0x48 | early_randomize_kstack_offset+0x104/0x168 | do_early_param+0xe4/0x148 | parse_args+0x3a4/0x838 | parse_early_options+0x50/0x68 | parse_early_param+0x58/0xe0 | setup_arch+0x78/0x1f0 | start_kernel+0xa0/0x530 | __primary_switched+0x8c/0xa0 | irq event stamp: 0 | hardirqs last enabled at (0): [<0000000000000000>] 0x0 | hardirqs last disabled at (0): [<0000000000000000>] 0x0 | softirqs last enabled at (0): [<0000000000000000>] 0x0 | softirqs last disabled at (0): [<0000000000000000>] 0x0 | ---[ end trace 0000000000000000 ]--- The warning has been produced since commit: 3e25d5a49f99b75b ("asm-generic: add an optional pfn_valid check to page_to_phys") ... which added a pfn_valid() check into page_to_phys(), and at this point in boot pfn_valid() will always return false because the vmemmap has not yet been initialized and there are no valid mem_sections yet. Before that commit, the arithmetic performed by page_to_phys() would give the expected physical address, though it is somewhat dubious to use vmemmap addresses before the vmemmap has been initialized. Aside from kernel image addresses, all executable code should be allocated from execmem (where all allocations will fall within the vmalloc area), and so there's no need for the fallback case when CONFIG_EXECMEM=n. Simplify patch_map() accordingly, directly converting kernel image addresses and removing the redundant fallback case. Fixes: 3e25d5a49f99 ("asm-generic: add an optional pfn_valid check to page_to_phys") Signed-off-by: Mark Rutland Cc: Arnd Bergmann Cc: Christoph Hellwig Cc: Mike Rapoport Cc: Thomas Huth Cc: Will Deacon Link: https://lore.kernel.org/r/20241202170359.1475019-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2024-11-24T00:00:50Z

Pull kvm updates from Paolo Bonzini: "The biggest change here is eliminating the awful idea that KVM had of essentially guessing which pfns are refcounted pages. The reason to do so was that KVM needs to map both non-refcounted pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP VMAs that contain refcounted pages. However, the result was security issues in the past, and more recently the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by struct page but is not refcounted. In particular this broke virtio-gpu blob resources (which directly map host graphics buffers into the guest as "vram" for the virtio-gpu device) with the amdgpu driver, because amdgpu allocates non-compound higher order pages and the tail pages could not be mapped into KVM. This requires adjusting all uses of struct page in the per-architecture code, to always work on the pfn whenever possible. The large series that did this, from David Stevens and Sean Christopherson, also cleaned up substantially the set of functions that provided arch code with the pfn for a host virtual addresses. The previous maze of twisty little passages, all different, is replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the non-__ versions of these two, and kvm_prefetch_pages) saving almost 200 lines of code. ARM: - Support for stage-1 permission indirection (FEAT_S1PIE) and permission overlays (FEAT_S1POE), including nested virt + the emulated page table walker - Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call was introduced in PSCIv1.3 as a mechanism to request hibernation, similar to the S4 state in ACPI - Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As part of it, introduce trivial initialization of the host's MPAM context so KVM can use the corresponding traps - PMU support under nested virtualization, honoring the guest hypervisor's trap configuration and event filtering when running a nested guest - Fixes to vgic ITS serialization where stale device/interrupt table entries are not zeroed when the mapping is invalidated by the VM - Avoid emulated MMIO completion if userspace has requested synchronous external abort injection - Various fixes and cleanups affecting pKVM, vCPU initialization, and selftests LoongArch: - Add iocsr and mmio bus simulation in kernel. - Add in-kernel interrupt controller emulation. - Add support for virtualization extensions to the eiointc irqchip. PPC: - Drop lingering and utterly obsolete references to PPC970 KVM, which was removed 10 years ago. - Fix incorrect documentation references to non-existing ioctls RISC-V: - Accelerate KVM RISC-V when running as a guest - Perf support to collect KVM guest statistics from host side s390: - New selftests: more ucontrol selftests and CPU model sanity checks - Support for the gen17 CPU model - List registers supported by KVM_GET/SET_ONE_REG in the documentation x86: - Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve documentation, harden against unexpected changes. Even if the hardware A/D tracking is disabled, it is possible to use the hardware-defined A/D bits to track if a PFN is Accessed and/or Dirty, and that removes a lot of special cases. - Elide TLB flushes when aging secondary PTEs, as has been done in x86's primary MMU for over 10 years. - Recover huge pages in-place in the TDP MMU when dirty page logging is toggled off, instead of zapping them and waiting until the page is re-accessed to create a huge mapping. This reduces vCPU jitter. - Batch TLB flushes when dirty page logging is toggled off. This reduces the time it takes to disable dirty logging by ~3x. - Remove the shrinker that was (poorly) attempting to reclaim shadow page tables in low-memory situations. - Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE. - Advertise CPUIDs for new instructions in Clearwater Forest - Quirk KVM's misguided behavior of initialized certain feature MSRs to their maximum supported feature set, which can result in KVM creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero value results in the vCPU having invalid state if userspace hides PDCM from the guest, which in turn can lead to save/restore failures. - Fix KVM's handling of non-canonical checks for vCPUs that support LA57 to better follow the "architecture", in quotes because the actual behavior is poorly documented. E.g. most MSR writes and descriptor table loads ignore CR4.LA57 and operate purely on whether the CPU supports LA57. - Bypass the register cache when querying CPL from kvm_sched_out(), as filling the cache from IRQ context is generally unsafe; harden the cache accessors to try to prevent similar issues from occuring in the future. The issue that triggered this change was already fixed in 6.12, but was still kinda latent. - Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM over-advertises SPEC_CTRL when trying to support cross-vendor VMs. - Minor cleanups - Switch hugepage recovery thread to use vhost_task. These kthreads can consume significant amounts of CPU time on behalf of a VM or in response to how the VM behaves (for example how it accesses its memory); therefore KVM tried to place the thread in the VM's cgroups and charge the CPU time consumed by that work to the VM's container. However the kthreads did not process SIGSTOP/SIGCONT, and therefore cgroups which had KVM instances inside could not complete freezing. Fix this by replacing the kthread with a PF_USER_WORKER thread, via the vhost_task abstraction. Another 100+ lines removed, with generally better behavior too like having these threads properly parented in the process tree. - Revert a workaround for an old CPU erratum (Nehalem/Westmere) that didn't really work; there was really nothing to work around anyway: the broken patch was meant to fix nested virtualization, but the PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the erratum. - Fix 6.12 regression where CONFIG_KVM will be built as a module even if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is 'y'. x86 selftests: - x86 selftests can now use AVX. Documentation: - Use rST internal links - Reorganize the introduction to the API document Generic: - Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead of RCU, so that running a vCPU on a different task doesn't encounter long due to having to wait for all CPUs become quiescent. In general both reads and writes are rare, but userspace that supports confidential computing is introducing the use of "helper" vCPUs that may jump from one host processor to another. Those will be very happy to trigger a synchronize_rcu(), and the effect on performance is quite the disaster" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits) KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD KVM: x86: add back X86_LOCAL_APIC dependency Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()" KVM: x86: switch hugepage recovery thread to vhost_task KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest Documentation: KVM: fix malformed table irqchip/loongson-eiointc: Add virt extension support LoongArch: KVM: Add irqfd support LoongArch: KVM: Add PCHPIC user mode read and write functions LoongArch: KVM: Add PCHPIC read and write functions LoongArch: KVM: Add PCHPIC device support LoongArch: KVM: Add EIOINTC user mode read and write functions LoongArch: KVM: Add EIOINTC read and write functions LoongArch: KVM: Add EIOINTC device support LoongArch: KVM: Add IPI user mode read and write function LoongArch: KVM: Add IPI read and write function LoongArch: KVM: Add IPI device support LoongArch: KVM: Add iocsr and mmio bus simulation in kernel KVM: arm64: Pass on SVE mapping failures ...

Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2024-11-23T17:58:07Z

Pull MM updates from Andrew Morton: - The series "zram: optimal post-processing target selection" from Sergey Senozhatsky improves zram's post-processing selection algorithm. This leads to improved memory savings. - Wei Yang has gone to town on the mapletree code, contributing several series which clean up the implementation: - "refine mas_mab_cp()" - "Reduce the space to be cleared for maple_big_node" - "maple_tree: simplify mas_push_node()" - "Following cleanup after introduce mas_wr_store_type()" - "refine storing null" - The series "selftests/mm: hugetlb_fault_after_madv improvements" from David Hildenbrand fixes this selftest for s390. - The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng implements some rationaizations and cleanups in the page mapping code. - The series "mm: optimize shadow entries removal" from Shakeel Butt optimizes the file truncation code by speeding up the handling of shadow entries. - The series "Remove PageKsm()" from Matthew Wilcox completes the migration of this flag over to being a folio-based flag. - The series "Unify hugetlb into arch_get_unmapped_area functions" from Oscar Salvador implements a bunch of consolidations and cleanups in the hugetlb code. - The series "Do not shatter hugezeropage on wp-fault" from Dev Jain takes away the wp-fault time practice of turning a huge zero page into small pages. Instead we replace the whole thing with a THP. More consistent cleaner and potentiall saves a large number of pagefaults. - The series "percpu: Add a test case and fix for clang" from Andy Shevchenko enhances and fixes the kernel's built in percpu test code. - The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett optimizes mremap() by avoiding doing things which we didn't need to do. - The series "Improve the tmpfs large folio read performance" from Baolin Wang teaches tmpfs to copy data into userspace at the folio size rather than as individual pages. A 20% speedup was observed. - The series "mm/damon/vaddr: Fix issue in damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting. - The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt removes the long-deprecated memcgv2 charge moving feature. - The series "fix error handling in mmap_region() and refactor" from Lorenzo Stoakes cleanup up some of the mmap() error handling and addresses some potential performance issues. - The series "x86/module: use large ROX pages for text allocations" from Mike Rapoport teaches x86 to use large pages for read-only-execute module text. - The series "page allocation tag compression" from Suren Baghdasaryan is followon maintenance work for the new page allocation profiling feature. - The series "page->index removals in mm" from Matthew Wilcox remove most references to page->index in mm/. A slow march towards shrinking struct page. - The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs interface tests" from Andrew Paniakin performs maintenance work for DAMON's self testing code. - The series "mm: zswap swap-out of large folios" from Kanchana Sridhar improves zswap's batching of compression and decompression. It is a step along the way towards using Intel IAA hardware acceleration for this zswap operation. - The series "kasan: migrate the last module test to kunit" from Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests over to the KUnit framework. - The series "implement lightweight guard pages" from Lorenzo Stoakes permits userapace to place fault-generating guard pages within a single VMA, rather than requiring that multiple VMAs be created for this. Improved efficiencies for userspace memory allocators are expected. - The series "memcg: tracepoint for flushing stats" from JP Kobryn uses tracepoints to provide increased visibility into memcg stats flushing activity. - The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky fixes a zram buglet which potentially affected performance. - The series "mm: add more kernel parameters to control mTHP" from Maíra Canal enhances our ability to control/configuremultisize THP from the kernel boot command line. - The series "kasan: few improvements on kunit tests" from Sabyrzhan Tasbolatov has a couple of fixups for the KASAN KUnit tests. - The series "mm/list_lru: Split list_lru lock into per-cgroup scope" from Kairui Song optimizes list_lru memory utilization when lockdep is enabled. * tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits) cma: enforce non-zero pageblock_order during cma_init_reserved_mem() mm/kfence: add a new kunit test test_use_after_free_read_nofault() zram: fix NULL pointer in comp_algorithm_show() memcg/hugetlb: add hugeTLB counters to memcg vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount zram: ZRAM_DEF_COMP should depend on ZRAM MAINTAINERS/MEMORY MANAGEMENT: add document files for mm Docs/mm/damon: recommend academic papers to read and/or cite mm: define general function pXd_init() kmemleak: iommu/iova: fix transient kmemleak false positive mm/list_lru: simplify the list_lru walk callback function mm/list_lru: split the lock to per-cgroup scope mm/list_lru: simplify reparenting and initial allocation mm/list_lru: code clean up for reparenting mm/list_lru: don't export list_lru_add mm/list_lru: don't pass unnecessary key parameters kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols ...

Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2024-11-20T23:13:02Z

Pull asm-generic updates from Arnd Bergmann: "These are a number of unrelated cleanups, generally simplifying the architecture specific header files: - A series from Al Viro simplifies asm/vga.h, after it turns out that most of it can be generalized. - A series from Julian Vetter adds a common version of memcpy_{to,from}io() and memset_io() and changes most architectures to use that instead of their own implementation - A series from Niklas Schnelle concludes his work to make PC style inb()/outb() optional - Nicolas Pitre contributes improvements for the generic do_div() helper - Christoph Hellwig adds a generic version of page_to_phys() and phys_to_page(), replacing the slightly different architecture specific definitions. - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions" * tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits) empty include/asm-generic/vga.h sparc: get rid of asm/vga.h asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to vt_buffer.h: get rid of dead code in default scr_...() instances tty: serial: export serial_8250_warn_need_ioport lib/iomem_copy: fix kerneldoc format style hexagon: simplify asm/io.h for !HAS_IOPORT loongarch: Use new fallback IO memcpy/memset csky: Use new fallback IO memcpy/memset arm64: Use new fallback IO memcpy/memset New implementation for IO memcpy and IO memset watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240 __arch_xprod64(): make __always_inline when optimizing for performance ARM: div64: improve __arch_xprod_64() asm-generic/div64: optimize/simplify __div64_const32() lib/math/test_div64: add some edge cases relevant to __div64_const32() asm-generic: add an optional pfn_valid check to page_to_phys asm-generic: provide generic page_to_phys and phys_to_page implementations asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n tty: serial: handle HAS_IOPORT dependencies ...

Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2024-11-20T21:19:25Z

Pull devicetree updates from Rob Herring: "Bindings: - Enable dtc "interrupt_provider" warnings for binding examples. Fix the warnings in fsl,mu-msi and ti,sci-inta due to this. - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and altr,fpga-passive-serial to DT schema format - Add some documentation on the different forms of YAML text blocks which are a constant source of review comments - Fix some schema errors in constraints for arrays - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462 DT core: - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n - Add some warnings on deprecated address handling - Rework early_init_dt_scan() so the arch can pass in the phys address of the DTB as __pa() is not always valid to use. This fixes a warning for arm64 with kexec. - Add and use some new DT graph iterators for iterating over ports and endpoints - Rework reserved-memory handling to be sized dynamically for fixed regions - Optimize of_modalias() to avoid a strlen() call - Constify struct device_node and property pointers where ever possible" * tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits) of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible of/address: Rework bus matching to avoid warnings of: WARN on deprecated #address-cells/#size-cells handling of/fdt: Don't use default address cell sizes for address translation dt-bindings: Enable dtc "interrupt_provider" warnings of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml media: xilinx-tpg: use new of_graph functions fbdev: omapfb: use new of_graph functions gpu: drm: omapdrm: use new of_graph functions ASoC: audio-graph-card2: use new of_graph functions ASoC: audio-graph-card: use new of_graph functions ASoC: test-component: use new of_graph functions of: property: use new of_graph functions of: property: add of_graph_get_next_port_endpoint() of: property: add of_graph_get_next_port() of: module: remove strlen() call in of_modalias() ...

Merge tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

2024-11-20T19:34:10Z

Pull ftrace updates from Steven Rostedt: - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes * tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits) ftrace: Show timings of how long nop patching took ftrace: Use guard to take ftrace_lock in ftrace_graph_set_hash() ftrace: Use guard to take the ftrace_lock in release_probe() ftrace: Use guard to lock ftrace_lock in cache_mod() ftrace: Use guard for match_records() fgraph: Use guard(mutex)(&ftrace_lock) for unregister_ftrace_graph() fgraph: Give ret_stack its own kmem cache fgraph: Separate size of ret_stack from PAGE_SIZE ftrace: Rename ftrace_regs_return_value to ftrace_regs_get_return_value selftests/ftrace: Fix check of return value in fgraph-retval.tc test ftrace: Use arch_ftrace_regs() for ftrace_regs_*() macros ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs ftrace: Make ftrace_regs abstract from direct use fgragh: No need to invoke the function call_filter_check_discard() fgraph: Simplify return address printing in function graph tracer function_graph: Remove unnecessary initialization in ftrace_graph_ret_addr() function_graph: Support recording and printing the function return address ftrace: Have calltime be saved in the fgraph storage ftrace: Use a running sleeptime instead of saving on shadow stack fgraph: Use fgraph data to store subtime for profiler ...