pm24.git/arch/arm, branch rust-6.7

Merge tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-10-01T01:41:37Z

Pull ARM SoC fixes from Arnd Bergmann: "These are the latest bug fixes that have come up in the soc tree. Most of these are fairly minor. Most notably, the majority of changes this time are not for dts files as usual. - Updates to the addresses of the broadcom and aspeed entries in the MAINTAINERS file. - Defconfig updates to address a regression on samsung and a build warning from an unknown Kconfig symbol - Build fixes for the StrongARM and Uniphier platforms - Code fixes for SCMI and FF-A firmware drivers, both of which had a simple bug that resulted in invalid data, and a lesser fix for the optee firmware driver - Multiple fixes for the recently added loongson/loongarch "guts" soc driver - Devicetree fixes for RISC-V on the startfive platform, addressing issues with NOR flash, usb and uart. - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with clock, gpio, hdmi settings and the Makefile - Bug fixes for i.MX firmware code and the OCOTP soc driver - Multiple fixes for the TI sysc bus driver - Minor dts updates for TI omap dts files, to address boot time warnings and errors" * tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) MAINTAINERS: Fix Florian Fainelli's email address arm64: defconfig: enable syscon-poweroff driver ARM: locomo: fix locomolcd_power declaration soc: loongson: loongson2_guts: Remove unneeded semicolon soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource() soc: loongson: loongson_pm2: Populate children syscon nodes dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child soc: loongson: loongson_pm2: Drop useless of_device_id compatible dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible soc: loongson: loongson_pm2: Add dependency for INPUT arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y ARM: uniphier: fix cache kernel-doc warnings MAINTAINERS: aspeed: Update Andrew's email address MAINTAINERS: aspeed: Update git tree URL firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND arm64: dts: imx: Add imx8mm-prt8mm.dtb to build arm64: dts: imx8mm-evk: Fix hdmi@3d node soc: imx8m: Enable OCOTP clock for imx8mm before reading registers arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock arm64: dts: imx8mp: Fix SDMA2/3 clocks ...

ARM: locomo: fix locomolcd_power declaration

2023-09-28T07:15:51Z

The locomolcd driver has one remaining missing-prototype warning: drivers/video/backlight/locomolcd.c:83:6: error: no previous prototype for 'locomolcd_power' [-Werror=missing-prototypes] There is in fact an unused prototype with a similar name in a global header, so move the actual one there and remove the old one. Link: https://lore.kernel.org/r/20230927194844.680771-1-arnd@kernel.org Signed-off-by: Arnd Bergmann

Merge tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

2023-09-27T09:02:33Z

Fixes for omaps and ti-sysc Fixes for several ti-sysc interconnect target module driver issues for external abort on non-linefetch, am35x soc match, and uart module quirks handling needed for devices to work and to allow device wake-up to work. Fixes for droid4 boot time errors and warnings as noticed after boot doing dmesg -lerr,warn. Let's also cut down the debug uart noise by using overrun-throttle-ms, and downgrade the u-boot version warnings to debug statements to further reduce the boot time noise with warnings. * tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up ARM: omap2+: Downgrade u-boot version warnings to debug statements ARM: dts: ti: omap: Fix noisy serial with overrun-throttle-ms for mapphone ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4 bus: ti-sysc: Fix missing AM35xx SoC matching bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset() Link: https://lore.kernel.org/r/pull-1695715881-95183@atomide.com Signed-off-by: Arnd Bergmann

ARM: uniphier: fix cache kernel-doc warnings

2023-09-27T09:02:14Z

Fix kernel-doc warning(s) as reported by lkp: arch/arm/mm/cache-uniphier.c:72: warning: cannot understand function prototype: 'struct uniphier_cache_data ' cache-uniphier.c:82: warning: Function parameter or member 'way_ctrl_base' not described in 'uniphier_cache_data' Fixes: e7ecbc057bc5 ("ARM: uniphier: add outer cache support") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Masahiro Yamada Cc: Olof Johansson Cc: Arnd Bergmann Cc: soc@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Kunihiko Hayashi Cc: Masami Hiramatsu Link: lore.kernel.org/r/202309260130.Uvwh8ceE-lkp@intel.com # fixes only one item Link: https://lore.kernel.org/r/20230926003548.22066-1-rdunlap@infradead.org Signed-off-by: Arnd Bergmann

xen: simplify evtchn_do_upcall() call maze

2023-09-19T05:04:49Z

There are several functions involved for performing the functionality of evtchn_do_upcall(): - __xen_evtchn_do_upcall() doing the real work - xen_hvm_evtchn_do_upcall() just being a wrapper for __xen_evtchn_do_upcall(), exposed for external callers - xen_evtchn_do_upcall() calling __xen_evtchn_do_upcall(), too, but without any user Simplify this maze by: - removing the unused xen_evtchn_do_upcall() - removing xen_hvm_evtchn_do_upcall() as the only left caller of __xen_evtchn_do_upcall(), while renaming __xen_evtchn_do_upcall() to xen_evtchn_do_upcall() Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Reviewed-by: Thomas Gleixner Signed-off-by: Juergen Gross

ARM: omap2+: Downgrade u-boot version warnings to debug statements

2023-09-13T07:18:19Z

We should be able to see real issues with dmesg -l err,warn. The u-boot revision warning should be a debug statement rather than a warning. Cc: Ivaylo Dimitrov Cc: Carl Philipp Klemm Cc: Merlijn Wajer Cc: Pavel Machek Reviewed-by: Sebastian Reichel Signed-off-by: Tony Lindgren

ARM: dts: ti: omap: Fix noisy serial with overrun-throttle-ms for mapphone

2023-09-13T07:18:09Z

On mapphone devices we may get lots of noise on the micro-USB port in debug uart mode until the phy-cpcap-usb driver probes. Let's limit the noise by using overrun-throttle-ms. Note that there is also a related separate issue where the charger cable connected may cause random sysrq requests until phy-cpcap-usb probes that still remains. Cc: Ivaylo Dimitrov Cc: Carl Philipp Klemm Cc: Merlijn Wajer Cc: Pavel Machek Reviewed-by: Sebastian Reichel Signed-off-by: Tony Lindgren

ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot

2023-09-13T07:17:59Z

Commit 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra") attempted to fix the PWM settings but ended up causin an additional clock reparenting error: clk: failed to reparent abe-clkctrl:0060:24 to sys_clkin_ck: -22 Only timer9 is in the PER domain and can use the sys_clkin_ck clock source. For timer8, the there is no sys_clkin_ck available as it's in the ABE domain, instead it should use syc_clk_div_ck. However, for power management, we want to use the always on sys_32k_ck instead. Cc: Ivaylo Dimitrov Cc: Carl Philipp Klemm Cc: Merlijn Wajer Cc: Pavel Machek Reviewed-by: Sebastian Reichel Fixes: 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra") Depends-on: 61978617e905 ("ARM: dts: Add minimal support for Droid Bionic xt875") Signed-off-by: Tony Lindgren

ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4

2023-09-13T07:17:47Z

Fix "thermal_sys: cpu_thermal: Failed to read thermal-sensors cells: -2" error on boot for omap3/4. This is caused by wrong addressing in the dts for bandgap sensor for single sensor instances. Note that omap4-cpu-thermal.dtsi is shared across omap4/5 and dra7, so we can't just change the addressing in omap4-cpu-thermal.dtsi. Cc: Ivaylo Dimitrov Cc: Carl Philipp Klemm Cc: Merlijn Wajer Cc: Pavel Machek Reviewed-by: Sebastian Reichel Fixes: a761d517bbb1 ("ARM: dts: omap3: Add cpu_thermal zone") Fixes: 0bbf6c54d100 ("arm: dts: add omap4 CPU thermal data") Signed-off-by: Tony Lindgren

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2023-09-07T20:52:20Z

Pull kvm updates from Paolo Bonzini: "ARM: - Clean up vCPU targets, always returning generic v8 as the preferred target - Trap forwarding infrastructure for nested virtualization (used for traps that are taken from an L2 guest and are needed by the L1 hypervisor) - FEAT_TLBIRANGE support to only invalidate specific ranges of addresses when collapsing a table PTE to a block PTE. This avoids that the guest refills the TLBs again for addresses that aren't covered by the table PTE. - Fix vPMU issues related to handling of PMUver. - Don't unnecessary align non-stack allocations in the EL2 VA space - Drop HCR_VIRT_EXCP_MASK, which was never used... - Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu parameter instead - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort() - Remove prototypes without implementations RISC-V: - Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest - Added ONE_REG interface for SATP mode - Added ONE_REG interface to enable/disable multiple ISA extensions - Improved error codes returned by ONE_REG interfaces - Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V - Added get-reg-list selftest for KVM RISC-V s390: - PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch) Allows a PV guest to use crypto cards. Card access is governed by the firmware and once a crypto queue is "bound" to a PV VM every other entity (PV or not) looses access until it is not bound anymore. Enablement is done via flags when creating the PV VM. - Guest debug fixes (Ilya) x86: - Clean up KVM's handling of Intel architectural events - Intel bugfixes - Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug registers and generate/handle #DBs - Clean up LBR virtualization code - Fix a bug where KVM fails to set the target pCPU during an IRTE update - Fix fatal bugs in SEV-ES intrahost migration - Fix a bug where the recent (architecturally correct) change to reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to skip it) - Retry APIC map recalculation if a vCPU is added/enabled - Overhaul emergency reboot code to bring SVM up to par with VMX, tie the "emergency disabling" behavior to KVM actually being loaded, and move all of the logic within KVM - Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC ratio MSR cannot diverge from the default when TSC scaling is disabled up related code - Add a framework to allow "caching" feature flags so that KVM can check if the guest can use a feature without needing to search guest CPUID - Rip out the ancient MMU_DEBUG crud and replace the useful bits with CONFIG_KVM_PROVE_MMU - Fix KVM's handling of !visible guest roots to avoid premature triple fault injection - Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface that is needed by external users (currently only KVMGT), and fix a variety of issues in the process Generic: - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass action specific data without needing to constantly update the main handlers. - Drop unused function declarations Selftests: - Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs - Add support for printf() in guest code and covert all guest asserts to use printf-based reporting - Clean up the PMU event filter test and add new testcases - Include x86 selftests in the KVM x86 MAINTAINERS entry" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits) KVM: x86/mmu: Include mmu.h in spte.h KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots KVM: x86/mmu: Disallow guest from using !visible slots for page tables KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page KVM: x86/mmu: Harden new PGD against roots without shadow pages KVM: x86/mmu: Add helper to convert root hpa to shadow page drm/i915/gvt: Drop final dependencies on KVM internal details KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers KVM: x86/mmu: Drop @slot param from exported/external page-track APIs KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled KVM: x86/mmu: Assert that correct locks are held for page write-tracking KVM: x86/mmu: Rename page-track APIs to reflect the new reality KVM: x86/mmu: Drop infrastructure for multiple page-track modes KVM: x86/mmu: Use page-track notifiers iff there are external users KVM: x86/mmu: Move KVM-only page-track declarations to internal header KVM: x86: Remove the unused page-track hook track_flush_slot() drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region() KVM: x86: Add a new page-track hook to handle memslot deletion drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot KVM: x86: Reject memslot MOVE operations if KVMGT is attached ...