pm24.git/arch/csky/kernel, branch v5.6

csky: Replace by

2020-02-23T04:48:55Z

The C-Sky platform code is not a clock provider, and just needs to call of_clk_init(). Hence it can include instead of . Signed-off-by: Geert Uytterhoeven Signed-off-by: Guo Ren

csky: Implement copy_thread_tls

2020-02-21T07:43:25Z

This is required for clone3 which passes the TLS value through a struct rather than a register. Cc: Amanieu d'Antras Signed-off-by: Guo Ren

csky: Add setup_initrd check code

2020-02-21T07:43:25Z

We should give some necessary check for initrd just like other architectures and it seems that setup_initrd() could be a common code for all architectures. Signed-off-by: Guo Ren

csky/smp: Fixup boot failed when CONFIG_SMP

2020-02-21T07:43:24Z

If we use a non-ipi-support interrupt controller, it will cause panic here. We should let cpu up and work with CONFIG_SMP, when we use a non-ipi intc. Signed-off-by: Guo Ren

csky: Set regs->usp to kernel sp, when the exception is from kernel

2020-02-21T07:43:24Z

In the past, we didn't care about kernel sp when saving pt_reg. But in some cases, we still need pt_reg->usp to represent the kernel stack before enter exception. For cmpxhg in atomic.S, we need save and restore usp for above. Signed-off-by: Guo Ren

csky: Separate fixaddr_init from highmem

2020-02-21T07:43:24Z

After fixaddr_init is separated from highmem, we could use tcm without highmem selected. (610 (abiv1) don't support highmem, but it could use tcm now.) Signed-off-by: Guo Ren

csky: Tightly-Coupled Memory or Sram support

2020-02-21T07:43:24Z

The implementation are not only used by TCM but also used by sram on SOC bus. It follow existed linux tcm software interface, so that old tcm application codes could be re-used directly. Software interface list in asm/tcm.h: - Variables/Const: __tcmdata, __tcmconst - Functions: __tcmfunc, __tcmlocalfunc - Malloc/Free: tcm_alloc, tcm_free In linux menuconfig: - Choose a TCM contain instrctions + data or separated in ITCM/DTCM. - Determine TCM_BASE (DTCM_BASE) in phyiscal address. - Determine size of TCM or ITCM(DTCM) in page counts. Here is hello tcm example from Documentation/arm/tcm.rst which could be directly used: /* Uninitialized data */ static u32 __tcmdata tcmvar; /* Initialized data */ static u32 __tcmdata tcmassigned = 0x2BADBABEU; /* Constant */ static const u32 __tcmconst tcmconst = 0xCAFEBABEU; static void __tcmlocalfunc tcm_to_tcm(void) { int i; for (i = 0; i < 100; i++) tcmvar ++; } static void __tcmfunc hello_tcm(void) { /* Some abstract code that runs in ITCM */ int i; for (i = 0; i < 100; i++) { tcmvar ++; } tcm_to_tcm(); } static void __init test_tcm(void) { u32 *tcmem; int i; hello_tcm(); printk("Hello TCM executed from ITCM RAM\n"); printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar); tcmvar = 0xDEADBEEFU; printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar); printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned); printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst); /* Allocate some TCM memory from the pool */ tcmem = tcm_alloc(20); if (tcmem) { printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem); tcmem[0] = 0xDEADBEEFU; tcmem[1] = 0x2BADBABEU; tcmem[2] = 0xCAFEBABEU; tcmem[3] = 0xDEADBEEFU; tcmem[4] = 0x2BADBABEU; for (i = 0; i < 5; i++) printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]); tcm_free(tcmem, 20); } } TODO: - Separate fixup mapping from highmem - Support abiv1 Signed-off-by: Guo Ren

csky: Initial stack protector support

2020-02-21T07:43:24Z

This is a basic -fstack-protector support without per-task canary switching. The protector will report something like when stack corruption is detected: It's tested with strcpy local array overflow in sys_kill and get: stack-protector: Kernel stack is corrupted in: sys_kill+0x23c/0x23c TODO: - Support task switch for different cannary Signed-off-by: Mao Han Signed-off-by: Guo Ren

Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2020-01-29T18:13:27Z

Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...

arch/csky/setup: Drop dummy_con initialization

2020-01-14T14:29:16Z

con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar Link: https://lore.kernel.org/r/20191218214506.49252-9-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman