pm24.git/arch/mips/alchemy, branch v3.18

MIPS: Alchemy: DB1300: Add touch penirq support

2014-09-22T11:35:47Z

wire up the WM9713 pendown irq support. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7563/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: DB1xxx: Explicitly set 50MHz clock for I2C/SPI units.

2014-09-22T11:35:47Z

Add an explicit call to set the desired rate to get the correct clock routing for the PSC clocks. It wasn't broken before, but now it's less affected by bootloader changes. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7554/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: devboards: sit and spin after poweroff

2014-09-22T11:35:46Z

On boards which don't support poweroff, systemd complains about this fact. In case poweroff fails, just sit and spin in the wait loop. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Cc: Manuel Lauss Patchwork: https://patchwork.linux-mips.org/patch/7558/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: Fix db1200 PSC clock enablement

2014-08-19T11:30:47Z

Enable PSC0 (I2C/SPI) clock and leave PSC1 (Audio) alone. This patch restores functionality to both Audio and I2C/SPI. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7544/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: remove old clock support

2014-07-30T12:12:00Z

With the clock framework in place, remove unused functions and bits, and drop the CLK_IGNORE_UNUSED flag, which is now unneeded. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7473/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: au1100fb: use clk framework

2014-07-30T12:10:39Z

Use the clock framework to en/disable the clock to the au1100 framebuffer device. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7474/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: db1x00: use clk framework

2014-07-30T12:10:00Z

Make use of the clk framework to set up and enable all PSC clocks. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7469/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: usb: use clk framework

2014-07-30T12:09:21Z

Add use of the common clock framework to set and enable the 48MHz clock source for the onchip OHCI and UDC blocks. Tested on a DB1500. (Au1200 and Au1300 use an external 48MHz crystal). Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7467/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: platform: use clk framework for uarts

2014-07-30T12:09:02Z

Use the clock framework to get the rate of the peripheral clock. Remove the now obsolete get_uart_baud_base function. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7468/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: clock framework integration of onchip clocks

2014-07-30T12:08:42Z

This patch introduces common clock framework integration for all configurable on-chip clocks on Alchemy chips: - 2 or 3 PLLs which generate integer multiples of the root rate 12MHz, - 6 dividers which take one of the 3 PLLs as input and divide their rate by either multiples of 2 or 1 (Au1300). - another bank of up to 6 muxes which take either one of the 6 above dividers or one of the PLLs directly and divide their rate further by 1, 2, 3 or 4. - a few other sources which are used by onchip peripherals and are informational. This implementation will take the clock tree as it was set up by boot firmware: all in-kernel boards should continue to work without having to set up the clock tree in board code. CLK_IGNORE_DISABLED will be removed once all drivers have been converted. Signed-off-by: Manuel Lauss Cc: Mike Turquette Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7466/ Signed-off-by: Ralf Baechle