pm24.git/arch/mips, branch v5.1

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2019-04-26T05:54:42Z

Alexei Starovoitov says: ==================== pull-request: bpf 2019-04-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) the bpf verifier fix to properly mark registers in all stack frames, from Paul. 2) preempt_enable_no_resched->preempt_enable fix, from Peter. 3) other misc fixes. ==================== Signed-off-by: David S. Miller

MIPS: eBPF: Make ebpf_to_mips_reg() static

2019-04-26T00:20:06Z

Fix sparse warning: arch/mips/net/ebpf_jit.c:196:5: warning: symbol 'ebpf_to_mips_reg' was not declared. Should it be static? Reported-by: Hulk Robot Signed-off-by: YueHaibing Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov

Merge tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2019-04-23T20:34:17Z

Pull syscall numbering updates from Arnd Bergmann: "arch: add pidfd and io_uring syscalls everywhere This comes a bit late, but should be in 5.1 anyway: we want the newly added system calls to be synchronized across all architectures in the release. I hope that in the future, any newly added system calls can be added to all architectures at the same time, and tested there while they are in linux-next, avoiding dependencies between the architecture maintainer trees and the tree that contains the new system call" * tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: add pidfd and io_uring syscalls everywhere

Merge tag 'mips_fixes_5.1_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2019-04-22T18:54:47Z

Pull MIPS fixes from Paul Burton: "A couple more MIPS fixes: - Fix indirect syscall tracing & seccomp filtering for big endian MIPS64 kernels, which previously loaded the syscall number incorrectly & would always use zero. - Fix performance counter IRQ setup for Atheros/ath79 SoCs, allowing perf to function on those systems. And not really a fix, but a useful addition: - Add a Broadcom mailing list to the MAINTAINERS entry for BMIPS systems to allow relevant engineers to track patch submissions" * tag 'mips_fixes_5.1_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: perf: ath79: Fix perfcount IRQ assignment MIPS: scall64-o32: Fix indirect syscall number load MAINTAINERS: BMIPS: Add internal Broadcom mailing list

MIPS: perf: ath79: Fix perfcount IRQ assignment

2019-04-16T22:09:10Z

Currently it's not possible to use perf on ath79 due to genirq flags mismatch happening on static virtual IRQ 13 which is used for performance counters hardware IRQ 5. On TP-Link Archer C7v5: CPU0 2: 0 MIPS 2 ath9k 4: 318 MIPS 4 19000000.eth 7: 55034 MIPS 7 timer 8: 1236 MISC 3 ttyS0 12: 0 INTC 1 ehci_hcd:usb1 13: 0 gpio-ath79 2 keys 14: 0 gpio-ath79 5 keys 15: 31 AR724X PCI 1 ath10k_pci $ perf top genirq: Flags mismatch irq 13. 00014c83 (mips_perf_pmu) vs. 00002003 (keys) On TP-Link Archer C7v4: CPU0 4: 0 MIPS 4 19000000.eth 5: 7135 MIPS 5 1a000000.eth 7: 98379 MIPS 7 timer 8: 30 MISC 3 ttyS0 12: 90028 INTC 0 ath9k 13: 5520 INTC 1 ehci_hcd:usb1 14: 4623 INTC 2 ehci_hcd:usb2 15: 32844 AR724X PCI 1 ath10k_pci 16: 0 gpio-ath79 16 keys 23: 0 gpio-ath79 23 keys $ perf top genirq: Flags mismatch irq 13. 00014c80 (mips_perf_pmu) vs. 00000080 (ehci_hcd:usb1) This problem is happening, because currently statically assigned virtual IRQ 13 for performance counters is not claimed during the initialization of MIPS PMU during the bootup, so the IRQ subsystem doesn't know, that this interrupt isn't available for further use. So this patch fixes the issue by simply booking hardware IRQ 5 for MIPS PMU. Tested-by: Kevin 'ldir' Darbyshire-Bryant Signed-off-by: Petr Štetiar Acked-by: John Crispin Acked-by: Marc Zyngier Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle Cc: James Hogan Cc: Thomas Gleixner Cc: Jason Cooper

MIPS: scall64-o32: Fix indirect syscall number load

2019-04-15T17:35:12Z

Commit 4c21b8fd8f14 (MIPS: seccomp: Handle indirect system calls (o32)) added indirect syscall detection for O32 processes running on MIPS64, but it did not work correctly for big endian kernel/processes. The reason is that the syscall number is loaded from ARG1 using the lw instruction while this is a 64-bit value, so zero is loaded instead of the syscall number. Fix the code by using the ld instruction instead. When running a 32-bit processes on a 64 bit CPU, the values are properly sign-extended, so it ensures the value passed to syscall_trace_enter is correct. Recent systemd versions with seccomp enabled whitelist the getpid syscall for their internal processes (e.g. systemd-journald), but call it through syscall(SYS_getpid). This fix therefore allows O32 big endian systems with a 64-bit kernel to run recent systemd versions. Signed-off-by: Aurelien Jarno Cc: # v3.15+ Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org

arch: add pidfd and io_uring syscalls everywhere

2019-04-15T14:31:17Z

Add the io_uring and pidfd_send_signal system calls to all architectures. These system calls are designed to handle both native and compat tasks, so all entries are the same across architectures, only arm-compat and the generic tale still use an old format. Acked-by: Michael Ellerman (powerpc) Acked-by: Heiko Carstens (s390) Acked-by: Geert Uytterhoeven Signed-off-by: Arnd Bergmann

Merge tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2019-04-10T02:27:18Z

Pull MIPS fixes from Paul Burton: "A few minor MIPS fixes: - Provide struct pt_regs * from get_irq_regs() to kgdb_nmicallback() when handling an IPI triggered by kgdb_roundup_cpus(), matching the behavior of other architectures & resolving kgdb issues for SMP systems. - Defer a pointer dereference until after a NULL check in the irq_shutdown callback for SGI IP27 HUB interrupts. - A defconfig update for the MSCC Ocelot to enable some necessary drivers" * tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig MIPS: SGI-IP27: Fix use of unchecked pointer in shutdown_bridge_irq MIPS: KGDB: fix kgdb support for SMP platforms.

syscalls: Remove start and number from syscall_get_arguments() args

2019-04-05T13:26:43Z

At Linux Plumbers, Andy Lutomirski approached me and pointed out that the function call syscall_get_arguments() implemented in x86 was horribly written and not optimized for the standard case of passing in 0 and 6 for the starting index and the number of system calls to get. When looking at all the users of this function, I discovered that all instances pass in only 0 and 6 for these arguments. Instead of having this function handle different cases that are never used, simply rewrite it to return the first 6 arguments of a system call. This should help out the performance of tracing system calls by ptrace, ftrace and perf. Link: http://lkml.kernel.org/r/20161107213233.754809394@goodmis.org Cc: Oleg Nesterov Cc: Kees Cook Cc: Andy Lutomirski Cc: Dominik Brodowski Cc: Dave Martin Cc: "Dmitry V. Levin" Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Acked-by: Paul Burton # MIPS parts Acked-by: Max Filippov # For xtensa changes Acked-by: Will Deacon # For the arm64 bits Reviewed-by: Thomas Gleixner # for x86 Reviewed-by: Dmitry V. Levin Reported-by: Andy Lutomirski Signed-off-by: Steven Rostedt (VMware)

MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig

2019-04-04T18:14:45Z

Some of the configuration were not selected by default anymore, therefore enable them again. Also remove some configs which are used for MSCC Ocelot. Signed-off-by: Horatiu Vultur Signed-off-by: Paul Burton Cc: Cc: Cc: Cc: Cc: Cc: