pm24.git/arch/openrisc, branch v5.3

Merge tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping

2019-07-12T22:13:55Z

Pull dma-mapping updates from Christoph Hellwig: - move the USB special case that bounced DMA through a device bar into the USB code instead of handling it in the common DMA code (Laurentiu Tudor and Fredrik Noring) - don't dip into the global CMA pool for single page allocations (Nicolin Chen) - fix a crash when allocating memory for the atomic pool failed during boot (Florian Fainelli) - move support for MIPS-style uncached segments to the common code and use that for MIPS and nios2 (me) - make support for DMA_ATTR_NON_CONSISTENT and DMA_ATTR_NO_KERNEL_MAPPING generic (me) - convert nds32 to the generic remapping allocator (me) * tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping: (29 commits) dma-mapping: mark dma_alloc_need_uncached as __always_inline MIPS: only select ARCH_HAS_UNCACHED_SEGMENT for non-coherent platforms usb: host: Fix excessive alignment restriction for local memory allocations lib/genalloc.c: Add algorithm, align and zeroed family of DMA allocators nios2: use the generic uncached segment support in dma-direct nds32: use the generic remapping allocator for coherent DMA allocations arc: use the generic remapping allocator for coherent DMA allocations dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code dma-mapping: add a dma_alloc_need_uncached helper openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support arc: remove the partial DMA_ATTR_NON_CONSISTENT support arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT support ARM: dma-mapping: allow larger DMA mask than supported dma-mapping: truncate dma masks to what dma_addr_t can hold iommu/dma: Apply dma_{alloc,free}_contiguous functions dma-remap: Avoid de-referencing NULL atomic_pool MIPS: use the generic uncached segment support in dma-direct dma-direct: provide generic support for uncached kernel segments au1100fb: fix DMA API abuse ...

Merge tag 'docs-5.3' of git://git.lwn.net/linux

2019-07-09T19:34:26Z

Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2019-07-09T04:48:15Z

Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...

openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support

2019-06-25T06:14:39Z

The openrisc DMA code supports DMA_ATTR_NON_CONSISTENT allocations, but does not provide a cache_sync operation. This means any user of it will never be able to actually transfer cache ownership and thus cause coherency bugs. Signed-off-by: Christoph Hellwig Acked-by: Stafford Horne

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

docs: kbuild: convert docs to ReST and rename to *.rst

2019-06-14T20:21:21Z

The kbuild documentation clearly shows that the documents there are written at different times: some use markdown, some use their own peculiar logic to split sections. Convert everything to ReST without affecting too much the author's style and avoiding adding uneeded markups. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jonathan Corbet

treewide: Add SPDX license identifier - Kbuild

2019-05-30T18:32:33Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0 Reported-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman Reviewed-by: Kate Stewart Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

signal: Remove the task parameter from force_sig_fault

2019-05-29T14:31:43Z

As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman"

signal: Explicitly call force_sig_fault on current

2019-05-29T14:31:43Z

Update the calls of force_sig_fault that pass in a variable that is set to current earlier to explicitly use current. This is to make the next change that removes the task parameter from force_sig_fault easier to verify. Signed-off-by: "Eric W. Biederman"