pm24.git/arch/powerpc/include, branch v5.6

powerpc/32s: Fix DSI and ISI exceptions for CONFIG_VMAP_STACK

2020-02-18T10:31:11Z

hash_page() needs to read page tables from kernel memory. When entire kernel memory is mapped by BATs, which is normally the case when CONFIG_STRICT_KERNEL_RWX is not set, it works even if the page hosting the page table is not referenced in the MMU hash table. However, if the page where the page table resides is not covered by a BAT, a DSI fault can be encountered from hash_page(), and it loops forever. This can happen when CONFIG_STRICT_KERNEL_RWX is selected and the alignment of the different regions is too small to allow covering the entire memory with BATs. This also happens when CONFIG_DEBUG_PAGEALLOC is selected or when booting with 'nobats' flag. Also, if the page containing the kernel stack is not present in the MMU hash table, registers cannot be saved and a recursive DSI fault is encountered. To allow hash_page() to properly do its job at all time and load the MMU hash table whenever needed, it must run with data MMU disabled. This means it must be called before re-enabling data MMU. To allow this, registers clobbered by hash_page() and create_hpte() have to be saved in the thread struct together with SRR0, SSR1, DAR and DSISR. It is also necessary to ensure that DSI prolog doesn't overwrite regs saved by prolog of the current running exception. That means: - DSI can only use SPRN_SPRG_SCRATCH0 - Exceptions must free SPRN_SPRG_SCRATCH0 before writing to the stack. This also fixes the Oops reported by Erhard when create_hpte() is called by add_hash_page(). Due to prolog size increase, a few more exceptions had to get split in two parts. Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Reported-by: Erhard F. Signed-off-by: Christophe Leroy Tested-by: Erhard F. Tested-by: Larry Finger Signed-off-by: Michael Ellerman Link: https://bugzilla.kernel.org/show_bug.cgi?id=206501 Link: https://lore.kernel.org/r/64a4aa44686e9fd4b01333401367029771d9b231.1581761633.git.christophe.leroy@c-s.fr

powerpc/hugetlb: Fix 8M hugepages on 8xx

2020-02-17T01:47:06Z

With HW assistance all page tables must be 4k aligned, the 8xx drops the last 12 bits during the walk. Redefine HUGEPD_SHIFT_MASK to mask last 12 bits out. HUGEPD_SHIFT_MASK is used to for alignment of page table cache. Fixes: 22569b881d37 ("powerpc/8xx: Enable 8M hugepage support with HW assistance") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/778b1a248c4c7ca79640eeff7740044da6a220a0.1581264115.git.christophe.leroy@c-s.fr

Merge tag 'powerpc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-02-08T22:28:26Z

Pull powerpc fixes from Michael Ellerman: - Fix an existing bug in our user access handling, exposed by one of the bug fixes we merged this cycle. - A fix for a boot hang on 32-bit with CONFIG_TRACE_IRQFLAGS and the recently added CONFIG_VMAP_STACK. Thanks to: Christophe Leroy, Guenter Roeck. * tag 'powerpc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACK powerpc/futex: Fix incorrect user access blocking

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T22:04:19Z

Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...

powerpc/futex: Fix incorrect user access blocking

2020-02-08T10:48:39Z

The early versions of our kernel user access prevention (KUAP) were written by Russell and Christophe, and didn't have separate read/write access. At some point I picked up the series and added the read/write access, but I failed to update the usages in futex.h to correctly allow read and write. However we didn't notice because of another bug which was causing the low-level code to always enable read and write. That bug was fixed recently in commit 1d8f739b07bd ("powerpc/kuap: Fix set direction in allow/prevent_user_access()"). futex_atomic_cmpxchg_inatomic() is passed the user address as %3 and does: 1: lwarx %1, 0, %3 cmpw 0, %1, %4 bne- 3f 2: stwcx. %5, 0, %3 Which clearly loads and stores from/to %3. The logic in arch_futex_atomic_op_inuser() is similar, so fix both of them to use allow_read_write_user(). Without this fix, and with PPC_KUAP_DEBUG=y, we see eg: Bug: Read fault blocked by AMR! WARNING: CPU: 94 PID: 149215 at arch/powerpc/include/asm/book3s/64/kup-radix.h:126 __do_page_fault+0x600/0xf30 CPU: 94 PID: 149215 Comm: futex_requeue_p Tainted: G W 5.5.0-rc7-gcc9x-g4c25df5640ae #1 ... NIP [c000000000070680] __do_page_fault+0x600/0xf30 LR [c00000000007067c] __do_page_fault+0x5fc/0xf30 Call Trace: [c00020138e5637e0] [c00000000007067c] __do_page_fault+0x5fc/0xf30 (unreliable) [c00020138e5638c0] [c00000000000ada8] handle_page_fault+0x10/0x30 --- interrupt: 301 at cmpxchg_futex_value_locked+0x68/0xd0 LR = futex_lock_pi_atomic+0xe0/0x1f0 [c00020138e563bc0] [c000000000217b50] futex_lock_pi_atomic+0x80/0x1f0 (unreliable) [c00020138e563c30] [c00000000021b668] futex_requeue+0x438/0xb60 [c00020138e563d60] [c00000000021c6cc] do_futex+0x1ec/0x2b0 [c00020138e563d90] [c00000000021c8b8] sys_futex+0x128/0x200 [c00020138e563e20] [c00000000000b7ac] system_call+0x5c/0x68 Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Cc: stable@vger.kernel.org # v5.2+ Reported-by: syzbot+e808452bad7c375cbee6@syzkaller-ppc64.appspotmail.com Signed-off-by: Michael Ellerman Reviewed-by: Christophe Leroy Link: https://lore.kernel.org/r/20200207122145.11928-1-mpe@ellerman.id.au

Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-02-04T13:06:46Z

Pull powerpc updates from Michael Ellerman: "A pretty small batch for us, and apologies for it being a bit late, I wanted to sneak Christophe's user_access_begin() series in. Summary: - Implement user_access_begin() and friends for our platforms that support controlling kernel access to userspace. - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx. - Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual machines) to use the IOMMU. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and some other improvements. - A series to use the PCI hotplug framework to control opencapi card's so that they can be reset and re-read after flashing a new FPGA image. As well as other minor fixes and improvements as usual. Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain" * tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits) powerpc: configs: Cleanup old Kconfig options powerpc/configs/skiroot: Enable some more hardening options powerpc/configs/skiroot: Disable xmon default & enable reboot on panic powerpc/configs/skiroot: Enable security features powerpc/configs/skiroot: Update for symbol movement only powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV powerpc/configs/skiroot: Drop HID_LOGITECH powerpc/configs: Drop NET_VENDOR_HP which moved to staging powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE powerpc/configs: Drop CONFIG_QLGE which moved to staging powerpc: Do not consider weak unresolved symbol relocations as bad powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK powerpc: indent to improve Kconfig readability powerpc: Provide initial documentation for PAPR hcalls powerpc: Implement user_access_save() and user_access_restore() powerpc: Implement user_access_begin and friends powerpc/32s: Prepare prevent_user_access() for user_access_end() powerpc/32s: Drop NULL addr verification powerpc/kuap: Fix set direction in allow/prevent_user_access() powerpc/32s: Fix bad_kuap_fault() ...

mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush

2020-02-04T03:05:26Z

Architectures for which we have hardware walkers of Linux page table should flush TLB on mmu gather batch allocation failures and batch flush. Some architectures like POWER supports multiple translation modes (hash and radix) and in the case of POWER only radix translation mode needs the above TLBI. This is because for hash translation mode kernel wants to avoid this extra flush since there are no hardware walkers of linux page table. With radix translation, the hardware also walks linux page table and with that, kernel needs to make sure to TLB invalidate page walk cache before page table pages are freed. More details in commit d86564a2f085 ("mm/tlb, x86/mm: Support invalidating TLB caches for RCU_TABLE_FREE") The changes to sparc are to make sure we keep the old behavior since we are now removing HAVE_RCU_TABLE_NO_INVALIDATE. The default value for tlb_needs_table_invalidate is to always force an invalidate and sparc can avoid the table invalidate. Hence we define tlb_needs_table_invalidate to false for sparc architecture. Link: http://lkml.kernel.org/r/20200116064531.483522-3-aneesh.kumar@linux.ibm.com Fixes: a46cc7a90fd8 ("powerpc/mm/radix: Improve TLB/PWC flushes") Signed-off-by: Peter Zijlstra (Intel) Acked-by: Michael Ellerman [powerpc] Cc: [4.14+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case

2020-02-04T03:05:25Z

Patch series "Fixup page directory freeing", v4. This is a repost of patch series from Peter with the arch specific changes except ppc64 dropped. ppc64 changes are added here because we are redoing the patch series on top of ppc64 changes. This makes it easy to backport these changes. Only the first 2 patches need to be backported to stable. The thing is, on anything SMP, freeing page directories should observe the exact same order as normal page freeing: 1) unhook page/directory 2) TLB invalidate 3) free page/directory Without this, any concurrent page-table walk could end up with a Use-after-Free. This is esp. trivial for anything that has software page-table walkers (HAVE_FAST_GUP / software TLB fill) or the hardware caches partial page-walks (ie. caches page directories). Even on UP this might give issues since mmu_gather is preemptible these days. An interrupt or preempted task accessing user pages might stumble into the free page if the hardware caches page directories. This patch series fixes ppc64 and add generic MMU_GATHER changes to support the conversion of other architectures. I haven't added patches w.r.t other architecture because they are yet to be acked. This patch (of 9): A followup patch is going to make sure we correctly invalidate page walk cache before we free page table pages. In order to keep things simple enable RCU_TABLE_FREE even for !SMP so that we don't have to fixup the !SMP case differently in the followup patch !SMP case is right now broken for radix translation w.r.t page walk cache flush. We can get interrupted in between page table free and that would imply we have page walk cache entries pointing to tables which got freed already. Michael said "both our platforms that run on Power9 force SMP on in Kconfig, so the !SMP case is unlikely to be a problem for anyone in practice, unless they've hacked their kernel to build it !SMP." Link: http://lkml.kernel.org/r/20200116064531.483522-2-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V Acked-by: Peter Zijlstra (Intel) Acked-by: Michael Ellerman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc: mm: add p?d_leaf() definitions

2020-02-04T03:05:24Z

walk_page_range() is going to be allowed to walk page tables other than those of user space. For this it needs to know when it has reached a 'leaf' entry in the page tables. This information is provided by the p?d_leaf() functions/macros. For powerpc p?d_is_leaf() functions already exist. Export them using the new p?d_leaf() name. Link: http://lkml.kernel.org/r/20191218162402.45610-7-steven.price@arm.com Signed-off-by: Steven Price Acked-by: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Albert Ou Cc: Alexandre Ghiti Cc: Andy Lutomirski Cc: Ard Biesheuvel Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Catalin Marinas Cc: Christian Borntraeger Cc: Dave Hansen Cc: David S. Miller Cc: Heiko Carstens Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: James Hogan Cc: James Morse Cc: Jerome Glisse Cc: "Liang, Kan" Cc: Mark Rutland Cc: Paul Burton Cc: Paul Walmsley Cc: Peter Zijlstra Cc: Ralf Baechle Cc: Russell King Cc: Thomas Gleixner Cc: Vasily Gorbik Cc: Vineet Gupta Cc: Will Deacon Cc: Zong Li Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random

2020-02-01T17:48:37Z

Pull random changes from Ted Ts'o: "Change /dev/random so that it uses the CRNG and only blocking if the CRNG hasn't initialized, instead of the old blocking pool. Also clean up archrandom.h, and some other miscellaneous cleanups" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (24 commits) s390x: Mark archrandom.h functions __must_check powerpc: Mark archrandom.h functions __must_check powerpc: Use bool in archrandom.h x86: Mark archrandom.h functions __must_check linux/random.h: Mark CONFIG_ARCH_RANDOM functions __must_check linux/random.h: Use false with bool linux/random.h: Remove arch_has_random, arch_has_random_seed s390: Remove arch_has_random, arch_has_random_seed powerpc: Remove arch_has_random, arch_has_random_seed x86: Remove arch_has_random, arch_has_random_seed random: remove some dead code of poolinfo random: fix typo in add_timer_randomness() random: Add and use pr_fmt() random: convert to ENTROPY_BITS for better code readability random: remove unnecessary unlikely() random: remove kernel.random.read_wakeup_threshold random: delete code to pull data into pools random: remove the blocking pool random: make /dev/random be almost like /dev/urandom random: ignore GRND_RANDOM in getentropy(2) ...