pm24.git/arch/powerpc/kernel, branch v4.6

powerpc: Update TM user feature bits in scan_features()

2016-04-18T10:10:45Z

We need to update the user TM feature bits (PPC_FEATURE2_HTM and PPC_FEATURE2_HTM) to mirror what we do with the kernel TM feature bit. At the moment, if firmware reports TM is not available we turn off the kernel TM feature bit but leave the userspace ones on. Userspace thinks it can execute TM instructions and it dies trying. This (together with a QEMU patch) fixes PR KVM, which doesn't currently support TM. Signed-off-by: Anton Blanchard Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman

powerpc: Update cpu_user_features2 in scan_features()

2016-04-18T10:10:45Z

scan_features() updates cpu_user_features but not cpu_user_features2. Amongst other things, cpu_user_features2 contains the user TM feature bits which we must keep in sync with the kernel TM feature bit. Signed-off-by: Anton Blanchard Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman

powerpc: scan_features() updates incorrect bits for REAL_LE

2016-04-18T10:08:38Z

The REAL_LE feature entry in the ibm_pa_feature struct is missing an MMU feature value, meaning all the remaining elements initialise the wrong values. This means instead of checking for byte 5, bit 0, we check for byte 0, bit 0, and then we incorrectly set the CPU feature bit as well as MMU feature bit 1 and CPU user feature bits 0 and 2 (5). Checking byte 0 bit 0 (IBM numbering), means we're looking at the "Memory Management Unit (MMU)" feature - ie. does the CPU have an MMU. In practice that bit is set on all platforms which have the property. This means we set CPU_FTR_REAL_LE always. In practice that seems not to matter because all the modern cpus which have this property also implement REAL_LE, and we've never needed to disable it. We're also incorrectly setting MMU feature bit 1, which is: #define MMU_FTR_TYPE_8xx 0x00000002 Luckily the only place that looks for MMU_FTR_TYPE_8xx is in Book3E code, which can't run on the same cpus as scan_features(). So this also doesn't matter in practice. Finally in the CPU user feature mask, we're setting bits 0 and 2. Bit 2 is not currently used, and bit 0 is: #define PPC_FEATURE_PPC_LE 0x00000001 Which says the CPU supports the old style "PPC Little Endian" mode. Again this should be harmless in practice as no 64-bit CPUs implement that mode. Fix the code by adding the missing initialisation of the MMU feature. Also add a comment marking CPU user feature bit 2 (0x4) as reserved. It would be unsafe to start using it as old kernels incorrectly set it. Fixes: 44ae3ab3358e ("powerpc: Free up some CPU feature bits by moving out MMU-related features") Signed-off-by: Anton Blanchard Cc: stable@vger.kernel.org [mpe: Flesh out changelog, add comment reserving 0x4] Signed-off-by: Michael Ellerman

powerpc/process: Fix altivec SPR not being saved

2016-03-29T01:08:08Z

In save_sprs() in process.c contains the following test: if (cpu_has_feature(cpu_has_feature(CPU_FTR_ALTIVEC))) t->vrsave = mfspr(SPRN_VRSAVE); CPU feature with the mask 0x1 is CPU_FTR_COHERENT_ICACHE so the test is equivilent to: if (cpu_has_feature(CPU_FTR_ALTIVEC) && cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) On CPUs without support for both (i.e G5) this results in vrsave not being saved between context switches. The vector register save/restore code doesn't use VRSAVE to determine which registers to save/restore, but the value of VRSAVE is used to determine if altivec is being used in several code paths. Fixes: 152d523e6307 ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") Cc: stable@vger.kernel.org Signed-off-by: Oliver O'Halloran Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman

arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections

2016-03-25T23:37:42Z

KASAN needs to know whether the allocation happens in an IRQ handler. This lets us strip everything below the IRQ entry point to reduce the number of unique stack traces needed to be stored. Move the definition of __irq_entry to so that the users don't need to pull in . Also introduce the __softirq_entry macro which is similar to __irq_entry, but puts the corresponding functions to the .softirqentry.text section. Signed-off-by: Alexander Potapenko Acked-by: Steven Rostedt Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Andrey Konovalov Cc: Dmitry Vyukov Cc: Andrey Ryabinin Cc: Konstantin Serebryany Cc: Dmitry Chernenkov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2016-03-19T22:38:41Z

Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ...

param: convert some "on"/"off" users to strtobool

2016-03-17T22:09:34Z

This changes several users of manual "on"/"off" parsing to use strtobool. Some side-effects: - these uses will now parse y/n/1/0 meaningfully too - the early_param uses will now bubble up parse errors Signed-off-by: Kees Cook Acked-by: Heiko Carstens Acked-by: Michael Ellerman Cc: Amitkumar Karwar Cc: Andy Shevchenko Cc: Daniel Borkmann Cc: Joe Perches Cc: Kalle Valo Cc: Martin Schwidefsky Cc: Nishant Sarmukadam Cc: Rasmus Villemoes Cc: Steve French Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc: query dynamic DEBUG_PAGEALLOC setting

2016-03-17T22:09:34Z

We can disable debug_pagealloc processing even if the code is compiled with CONFIG_DEBUG_PAGEALLOC. This patch changes the code to query whether it is enabled or not in runtime. Signed-off-by: Joonsoo Kim Acked-by: David Rientjes Cc: Christian Borntraeger Cc: Benjamin Herrenschmidt Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2016-03-16T16:55:35Z

Pull KVM updates from Paolo Bonzini: "One of the largest releases for KVM... Hardly any generic changes, but lots of architecture-specific updates. ARM: - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems - PMU support for guests - 32bit world switch rewritten in C - various optimizations to the vgic save/restore code. PPC: - enabled KVM-VFIO integration ("VFIO device") - optimizations to speed up IPIs between vcpus - in-kernel handling of IOMMU hypercalls - support for dynamic DMA windows (DDW). s390: - provide the floating point registers via sync regs; - separated instruction vs. data accesses - dirty log improvements for huge guests - bugfixes and documentation improvements. x86: - Hyper-V VMBus hypercall userspace exit - alternative implementation of lowest-priority interrupts using vector hashing (for better VT-d posted interrupt support) - fixed guest debugging with nested virtualizations - improved interrupt tracking in the in-kernel IOAPIC - generic infrastructure for tracking writes to guest memory - currently its only use is to speedup the legacy shadow paging (pre-EPT) case, but in the future it will be used for virtual GPUs as well - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits) KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch KVM: x86: disable MPX if host did not enable MPX XSAVE features arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit arm64: KVM: vgic-v3: Reset LRs at boot time arm64: KVM: vgic-v3: Do not save an LR known to be empty arm64: KVM: vgic-v3: Save maintenance interrupt state only if required arm64: KVM: vgic-v3: Avoid accessing ICH registers KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit KVM: arm/arm64: vgic-v2: Reset LRs at boot time KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers KVM: s390: allocate only one DMA page per VM KVM: s390: enable STFLE interpretation only if enabled for the guest KVM: s390: wake up when the VCPU cpu timer expires KVM: s390: step the VCPU timer while in enabled wait KVM: s390: protect VCPU cpu timer with a seqcount KVM: s390: step VCPU cpu timer during kvm_run ioctl ...

powerpc: Fix unrecoverable SLB miss during restore_math()

2016-03-16T04:23:02Z

Commit 70fe3d9 "powerpc: Restore FPU/VEC/VSX if previously used" introduces a call to restore_math() late in the syscall return path, after MSR_RI has been cleared. The MSR_RI flag is used to indicate whether the kernel can take another exception or not. A cleared MSR_RI flag indicates that the kernel cannot. Unfortunately when a machine is under SLB pressure an SLB miss can occur in restore_math() which (with MSR_RI cleared) leads to an unrecoverable exception. Unrecoverable exception 4100 at c0000000000088d8 cpu 0x0: Vector: 4100 at [c0000003fa473b20] pc: c0000000000088d8: .load_vr_state+0x70/0x110 lr: c00000000000f710: .restore_math+0x130/0x188 sp: c0000003fa473da0 msr: 9000000002003030 current = 0xc0000007f876f180 paca = 0xc00000000fff0000 softe: 0 irq_happened: 0x01 pid = 1944, comm = K08umountfs [link register ] c00000000000f710 .restore_math+0x130/0x188 [c0000003fa473da0] c0000003fa473e30 (unreliable) [c0000003fa473e30] c000000000007b6c system_call+0x84/0xfc The clearing of MSR_RI is actually an optimisation to avoid multiple MSR writes, what must be disabled are interrupts. See comment in entry_64.S: /* * For performance reasons we clear RI the same time that we * clear EE. We only need to clear RI just before we restore r13 * below, but batching it with EE saves us one expensive mtmsrd call. * We have to be careful to restore RI if we branch anywhere from * here (eg syscall_exit_work). */ At the point of calling restore_math() r13 has not been restored, as such, the quick fix of turning MSR_RI back on for the call to restore_math() will eliminate the occurrence of an unrecoverable exception. We'd like to do a better fix in future. Fixes: 70fe3d980f5f ("powerpc: Restore FPU/VEC/VSX if previously used") Signed-off-by: Cyril Bur Signed-off-by: Michael Ellerman