pm24.git/arch/riscv/kernel, branch v5.6

riscv: fix the IPI missing issue in nommu mode

2020-03-19T01:44:39Z

This patch fixes the IPI(inner processor interrupt) missing issue. It failed because it used hartid_mask to iterate for_each_cpu(), however the cpu_mask and hartid_mask may not be always the same. It will never send the IPI to hartid 4 because it will be skipped in for_each_cpu loop in my case. We can reproduce this case in Qemu sifive_u machine by this command. qemu-system-riscv64 -nographic -smp 5 -m 1G -M sifive_u -kernel \ arch/riscv/boot/loader It will hang in csd_lock_wait(csd) because the csd_unlock(csd) is not called. It is not called because hartid 4 doesn't receive the IPI to release this lock. The caller hart doesn't send the IPI to hartid 4 is because of hartid 4 is skipped in for_each_cpu(). It will be skipped is because "(cpu) < nr_cpu_ids" is not true. The hartid is 4 and nr_cpu_ids is 4. Therefore it should use cpumask in for_each_cpu() instead of hartid_mask. /* Send a message to all CPUs in the map */ arch_send_call_function_ipi_mask(cfd->cpumask_ipi); if (wait) { for_each_cpu(cpu, cfd->cpumask) { call_single_data_t *csd; csd = per_cpu_ptr(cfd->csd, cpu); csd_lock_wait(csd); } } for ((cpu) = -1; \ (cpu) = cpumask_next((cpu), (mask)), \ (cpu) < nr_cpu_ids;) It could boot to login console after this patch applied. Fixes: b2d36b5668f6 ("riscv: provide native clint access for M-mode") Signed-off-by: Greentime Hu Reviewed-by: Palmer Dabbelt Signed-off-by: Palmer Dabbelt

riscv: fix seccomp reject syscall code path

2020-03-05T21:58:15Z

If secure_computing() rejected a system call, we were previously setting the system call number to -1, to indicate to later code that the syscall failed. However, if something (e.g. a user notification) was sleeping, and received a signal, we may set a0 to -ERESTARTSYS and re-try the system call again. In this case, seccomp "denies" the syscall (because of the signal), and we would set a7 to -1, thus losing the value of the system call we want to restart. Instead, let's return -1 from do_syscall_trace_enter() to indicate that the syscall was rejected, so we don't clobber the value in case of -ERESTARTSYS or whatever. This commit fixes the user_notification_signal seccomp selftest on riscv to no longer hang. That test expects the system call to be re-issued after the signal, and it wasn't due to the above bug. Now that it is, everything works normally. Note that in the ptrace (tracer) case, the tracer can set the register values to whatever they want, so we still need to keep the code that handles out-of-bounds syscalls. However, we can drop the comment. We can also drop syscall_set_nr(), since it is no longer used anywhere, and the code that re-loads the value in a7 because of it. Reported in: https://lore.kernel.org/bpf/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/ Reported-by: David Abdurachmanov Signed-off-by: Tycho Andersen Reviewed-by: Kees Cook Signed-off-by: Palmer Dabbelt

riscv: avoid the PIC offset of static percpu data in module beyond 2G limits

2020-03-03T18:27:45Z

The compiler uses the PIC-relative method to access static variables instead of GOT when the code model is PIC. Therefore, the limitation of the access range from the instruction to the symbol address is +-2GB. Under this circumstance, the kernel cannot load a kernel module if this module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason is that kernel relocates the .data..percpu section of the kernel module to the end of kernel's .data..percpu. Hence, the distance between the per-CPU symbols and the instruction will exceed the 2GB limits. To solve this problem, the kernel should place the loaded module in the memory area [&_end-2G, VMALLOC_END]. Signed-off-by: Vincent Chen Suggested-by: Alexandre Ghiti Suggested-by: Anup Patel Tested-by: Alexandre Ghiti Tested-by: Carlos de Paula Signed-off-by: Palmer Dabbelt

RISC-V: Don't enable all interrupts in trap_init()

2020-02-18T18:34:04Z

Historically, we have been enabling all interrupts for each HART in trap_init(). Ideally, we should only enable M-mode interrupts for M-mode kernel and S-mode interrupts for S-mode kernel in trap_init(). Currently, we get suprious S-mode interrupts on Kendryte K210 board running M-mode NO-MMU kernel because we are enabling all interrupts in trap_init(). To fix this, we only enable software and external interrupt in trap_init(). In future, trap_init() will only enable software interrupt and PLIC driver will enable external interrupt using CPU notifiers. Fixes: a4c3733d32a7 ("riscv: abstract out CSR names for supervisor vs machine mode") Signed-off-by: Anup Patel Reviewed-by: Atish Patra Tested-by: Palmer Dabbelt [QMEU virt machine with SMP] [Palmer: Move the Fixes up to a newer commit] Reviewed-by: Palmer Dabbelt Signed-off-by: Palmer Dabbelt

riscv: set pmp configuration if kernel is running in M-mode

2020-02-18T17:41:24Z

When the kernel is running in S-mode, the expectation is that the bootloader or SBI layer will configure the PMP to allow the kernel to access physical memory. But, when the kernel is running in M-mode and is started with the ELF "loader", there's probably no bootloader or SBI layer involved to configure the PMP. Thus, we need to configure the PMP ourselves to enable the kernel to access all regions. Signed-off-by: Greentime Hu Reviewed-by: Palmer Dabbelt Signed-off-by: Palmer Dabbelt

Merge tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2020-01-31T19:23:29Z

Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of patches for this merge window: - Support for kasan - 32-bit physical addresses on rv32i-based systems - Support for CONFIG_DEBUG_VIRTUAL - DT entry for the FU540 GPIO controller, which has recently had a device driver merged These boot a buildroot-based system on QEMU's virt board for me" * tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: Add DT support for SiFive FU540 GPIO driver riscv: mm: add support for CONFIG_DEBUG_VIRTUAL riscv: keep 32-bit kernel to 32-bit phys_addr_t kasan: Add riscv to KASAN documentation. riscv: Add KASAN support kasan: No KASAN's memmove check if archs don't have it.

Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2020-01-29T18:13:27Z

Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-01-28T18:07:09Z

Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...

riscv: Add KASAN support

2020-01-22T21:09:58Z

This patch ports the feature Kernel Address SANitizer (KASAN). Note: The start address of shadow memory is at the beginning of kernel space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is 2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the shadow memory would not overlap with the fixmap area. There are currently two limitations in this port, 1. RV64 only: KASAN need large address space for extra shadow memory region. 2. KASAN can't debug the modules since the modules are allocated in VMALLOC area. We mapped the shadow memory, which corresponding to VMALLOC area, to the kasan_early_shadow_page because we don't have enough physical space for all the shadow memory corresponding to VMALLOC area. Signed-off-by: Nick Hu Reported-by: Greentime Hu Signed-off-by: Palmer Dabbelt

riscv: delete temporary files

2020-01-18T21:22:13Z

Temporary files used in the VDSO build process linger on even after make mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp. Delete them once they're no longer needed. Signed-off-by: Ilie Halip Signed-off-by: Paul Walmsley