pm24.git/arch/s390/kernel, branch master

Merge tag 's390-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2024-11-29T18:40:52Z

Pull more s390 updates from Heiko Carstens: - Add swap entry for hugetlbfs support - Add PTE_MARKER support for hugetlbs mappings; this fixes a regression (possible page fault loop) which was introduced when support for UFFDIO_POISON for hugetlbfs was added - Add ARCH_HAS_PREEMPT_LAZY and PREEMPT_DYNAMIC support - Mark IRQ entries in entry code, so that stack tracers can filter out the non-IRQ parts of stack traces. This fixes stack depot capacity limit warnings, since without filtering the number of unique stack traces is huge - In PCI code fix leak of struct zpci_dev object, and fix potential double remove of hotplug slot - Fix pagefault_disable() / pagefault_enable() unbalance in arch_stack_user_walk_common() - A couple of inline assembly optimizations, more cmpxchg() to try_cmpxchg() conversions, and removal of usages of xchg() and cmpxchg() on one and two byte memory areas - Various other small improvements and cleanups * tag 's390-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (27 commits) Revert "s390/mm: Allow large pages for KASAN shadow mapping" s390/spinlock: Use flag output constraint for arch_cmpxchg_niai8() s390/spinlock: Use R constraint for arch_load_niai4() s390/spinlock: Generate shorter code for arch_spin_unlock() s390/spinlock: Remove condition code clobber from arch_spin_unlock() s390/spinlock: Use symbolic names in inline assemblies s390: Support PREEMPT_DYNAMIC s390/pci: Fix potential double remove of hotplug slot s390/pci: Fix leak of struct zpci_dev when zpci_add_device() fails s390/mm/hugetlbfs: Add missing includes s390/mm: Add PTE_MARKER support for hugetlbfs mappings s390/mm: Introduce region-third and segment table swap entries s390/mm: Introduce region-third and segment table entry present bits s390/mm: Rearrange region-third and segment table entry SW bits KVM: s390: Increase size of union sca_utility to four bytes KVM: s390: Remove one byte cmpxchg() usage KVM: s390: Use try_cmpxchg() instead of cmpxchg() loops s390/ap: Replace xchg() with WRITE_ONCE() s390/mm: Allow large pages for KASAN shadow mapping s390: Add ARCH_HAS_PREEMPT_LAZY support ...

Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2024-11-21T16:28:08Z

Pull networking updates from Paolo Abeni: "The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core: - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infrastructure is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code: - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter: - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF: - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols: - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API: - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling: - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers: - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - add support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Add representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - add support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implement page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - add dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - add clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature" * tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits) mm: page_frag: fix a compile error when kernel is not compiled Documentation: tipc: fix formatting issue in tipc.rst selftests: nic_performance: Add selftest for performance of NIC driver selftests: nic_link_layer: Add selftest case for speed and duplex states selftests: nic_link_layer: Add link layer selftest for NIC driver bnxt_en: Add FW trace coredump segments to the coredump bnxt_en: Add a new ethtool -W dump flag bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr() bnxt_en: Add functions to copy host context memory bnxt_en: Do not free FW log context memory bnxt_en: Manage the FW trace context memory bnxt_en: Allocate backing store memory for FW trace logs bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem() bnxt_en: Refactor bnxt_free_ctx_mem() bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type bnxt_en: Update firmware interface spec to 1.10.3.85 selftests/bpf: Add some tests with sockmap SK_PASS bpf: fix recursive lock when verdict program return SK_PASS wireguard: device: support big tcp GSO wireguard: selftests: load nf_conntrack if not present ...

s390/entry: Mark IRQ entries to fix stack depot warnings

2024-11-21T11:44:07Z

The stack depot filters out everything outside of the top interrupt context as an uninteresting or irrelevant part of the stack traces. This helps with stack trace de-duplication, avoiding an explosion of saved stack traces that share the same IRQ context code path but originate from different randomly interrupted points, eventually exhausting the stack depot. Filtering uses in_irqentry_text() to identify functions within the .irqentry.text and .softirqentry.text sections, which then become the last stack trace entries being saved. While __do_softirq() is placed into the .softirqentry.text section by common code, populating .irqentry.text is architecture-specific. Currently, the .irqentry.text section on s390 is empty, which prevents stack depot filtering and de-duplication and could result in warnings like: Stack depot reached limit capacity WARNING: CPU: 0 PID: 286113 at lib/stackdepot.c:252 depot_alloc_stack+0x39a/0x3c8 with PREEMPT and KASAN enabled. Fix this by moving the IO/EXT interrupt handlers from .kprobes.text into the .irqentry.text section and updating the kprobes blacklist to include the .irqentry.text section. This is done only for asynchronous interrupts and explicitly not for program checks, which are synchronous and where the context beyond the program check is important to preserve. Despite machine checks being somewhat in between, they are extremely rare, and preserving context when possible is also of value. SVCs and Restart Interrupts are not relevant, one being always at the boundary to user space and the other being a one-time thing. IRQ entries filtering is also optionally used in ftrace function graph, where the same logic applies. Cc: stable@vger.kernel.org # 5.15+ Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Heiko Carstens

s390/cpum_sf: Simplify release of SDBs and SDBTs

2024-11-21T11:44:07Z

Free_sampling_buffer() releases the Sampling Data Buffers (SDBs) and Sampling Data Buffer Table (SDBTs) allocated at event initialization. Both buffers are of PAGE_SIZE bytes. Each SDBT consists of 512 entries. The first 511 entries point to SDBs the last entry points to a successor SDBT. The last SDBT in the list points to the origin of all SDBTs. SDBTs do not contain holes, that is an entry always points to a SDB. If less than 511 SDBs have been allocation, the last entry points to the origin SDBT. Simplify the release of the SDBs and SDBTs, walk along the SDBT chain, release SDBs and SDBTs and stop when reaching the origin again. Signed-off-by: Thomas Richter Reviewed-by: Sumanth Korikkar Signed-off-by: Heiko Carstens

s390/stacktrace: Use break instead of return statement

2024-11-21T11:44:07Z

arch_stack_walk_user_common() contains a return statement instead of a break statement in case store_ip() fails while trying to store a callchain entry of a user space process. This may lead to a missing pagefault_enable() call. If this happens any subsequent page fault of the process won't be resolved by the page fault handler and this in turn will lead to the process being killed. Use a break instead of a return statement to fix this. Fixes: ebd912ff9919 ("s390/stacktrace: Merge perf_callchain_user() and arch_stack_walk_user()") Cc: stable@vger.kernel.org Reviewed-by: Jens Remus Signed-off-by: Heiko Carstens

s390/debug: Pass in and enforce output buffer size for format handlers

2024-11-21T11:44:06Z

The s390dbf format handler rely on being passed an output buffer sized such that their output will always fit and then use plain sprintf() to write to it. While only supplied data from other kernel components this still potentially allows buffer overwrite if callers are not careful. Instead just pass in the size of the output buffer and use scnprintf() instead of sprintf() and strscpy() instead of strcpy(). The latter also allows us to get rid of a separate strlen() call. Signed-off-by: Niklas Schnelle Reviewed-by: Heiko Carstens Signed-off-by: Heiko Carstens

Merge tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

2024-11-20T19:34:10Z

Pull ftrace updates from Steven Rostedt: - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes * tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits) ftrace: Show timings of how long nop patching took ftrace: Use guard to take ftrace_lock in ftrace_graph_set_hash() ftrace: Use guard to take the ftrace_lock in release_probe() ftrace: Use guard to lock ftrace_lock in cache_mod() ftrace: Use guard for match_records() fgraph: Use guard(mutex)(&ftrace_lock) for unregister_ftrace_graph() fgraph: Give ret_stack its own kmem cache fgraph: Separate size of ret_stack from PAGE_SIZE ftrace: Rename ftrace_regs_return_value to ftrace_regs_get_return_value selftests/ftrace: Fix check of return value in fgraph-retval.tc test ftrace: Use arch_ftrace_regs() for ftrace_regs_*() macros ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs ftrace: Make ftrace_regs abstract from direct use fgragh: No need to invoke the function call_filter_check_discard() fgraph: Simplify return address printing in function graph tracer function_graph: Remove unnecessary initialization in ftrace_graph_ret_addr() function_graph: Support recording and printing the function return address ftrace: Have calltime be saved in the fgraph storage ftrace: Use a running sleeptime instead of saving on shadow stack fgraph: Use fgraph data to store subtime for profiler ...

Merge tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-11-20T00:09:13Z

Pull vdso data page handling updates from Thomas Gleixner: "First steps of consolidating the VDSO data page handling. The VDSO data page handling is architecture specific for historical reasons, but there is no real technical reason to do so. Aside of that VDSO data has become a dump ground for various mechanisms and fail to provide a clear separation of the functionalities. Clean this up by: - consolidating the VDSO page data by getting rid of architecture specific warts especially in x86 and PowerPC. - removing the last includes of header files which are pulling in other headers outside of the VDSO namespace. - seperating timekeeping and other VDSO data accordingly. Further consolidation of the VDSO page handling is done in subsequent changes scheduled for the next merge window. This also lays the ground for expanding the VDSO time getters for independent PTP clocks in a generic way without making every architecture add support seperately" * tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) x86/vdso: Add missing brackets in switch case vdso: Rename struct arch_vdso_data to arch_vdso_time_data powerpc: Split systemcfg struct definitions out from vdso powerpc: Split systemcfg data out of vdso data page powerpc: Add kconfig option for the systemcfg page powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors powerpc/pseries/lparcfg: Fix printing of system_active_processors powerpc/procfs: Propagate error of remap_pfn_range() powerpc/vdso: Remove offset comment from 32bit vdso_arch_data x86/vdso: Split virtual clock pages into dedicated mapping x86/vdso: Delete vvar.h x86/vdso: Access vdso data without vvar.h x86/vdso: Move the rng offset to vsyscall.h x86/vdso: Access rng vdso data without vvar.h x86/vdso: Access timens vdso data without vvar.h x86/vdso: Allocate vvar page from C code x86/vdso: Access rng data from kernel without vvar x86/vdso: Place vdso_data at beginning of vvar page x86/vdso: Use __arch_get_vdso_data() to access vdso data x86/mm/mmap: Remove arch_vma_name() ...

Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-11-19T23:54:19Z

Pull interrupt subsystem updates from Thomas Gleixner: "Tree wide: - Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. Core code: - Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. - Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. - Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. - Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. Drivers: - New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips - Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. - Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. - Small cleanups and fixes all over the place" * tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) irqchip/riscv-aplic: Prevent crash when MSI domain is missing genirq/proc: Use seq_put_decimal_ull_width() for decimal values softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT. timers: Use __raise_softirq_irqoff() to raise the softirq. hrtimer: Use __raise_softirq_irqoff() to raise the softirq riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers irqchip: Add T-HEAD C900 ACLINT SSWI driver dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK irqchip/mips-gic: Prevent indirect access to clusters without CPU cores irqchip/mips-gic: Multi-cluster support irqchip/mips-gic: Setup defaults in each cluster irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic() irqchip/mips-gic: Replace open coded online CPU iterations genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show() genirq/devres: Don't free interrupt which is not managed by devres irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool() irqchip/aspeed-intc: Add AST27XX INTC support dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC ...

Merge tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-11-19T21:34:06Z

Pull performance events updates from Ingo Molnar: "Uprobes: - Add BPF session support (Jiri Olsa) - Switch to RCU Tasks Trace flavor for better performance (Andrii Nakryiko) - Massively increase uretprobe SMP scalability by SRCU-protecting the uretprobe lifetime (Andrii Nakryiko) - Kill xol_area->slot_count (Oleg Nesterov) Core facilities: - Implement targeted high-frequency profiling by adding the ability for an event to "pause" or "resume" AUX area tracing (Adrian Hunter) VM profiling/sampling: - Correct perf sampling with guest VMs (Colton Lewis) New hardware support: - x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi) Misc fixes and enhancements: - x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter) - x86/amd: Warn only on new bits set (Breno Leitao) - x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init (Jean Delvare) - uprobes: Re-order struct uprobe_task to save some space (Christophe JAILLET) - x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang) - x86/rapl: Clean up cpumask and hotplug (Kan Liang) - uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg Nesterov)" * tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) perf/core: Correct perf sampling with guest VMs perf/x86: Refactor misc flag assignments perf/powerpc: Use perf_arch_instruction_pointer() perf/core: Hoist perf_instruction_pointer() and perf_misc_flags() perf/arm: Drop unused functions uprobes: Re-order struct uprobe_task to save some space perf/x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling perf/x86/intel/pt: Add support for pause / resume perf/core: Add aux_pause, aux_resume, aux_start_paused perf/x86/intel/pt: Fix buffer full but size is 0 case uprobes: SRCU-protect uretprobe lifetime (with timeout) uprobes: allow put_uprobe() from non-sleepable softirq context perf/x86/rapl: Clean up cpumask and hotplug perf/x86/rapl: Move the pmu allocation out of CPU hotplug uprobe: Add support for session consumer uprobe: Add data pointer to consumer handlers perf/x86/amd: Warn only on new bits set uprobes: fold xol_take_insn_slot() into xol_get_insn_slot() uprobes: kill xol_area->slot_count ...