pm24.git/drivers/ata, branch rust-6.8

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-12-01T21:27:20Z

Pull SCSI fixes from James Bottomley: "Three small fixes, one in drivers. The core changes are to the internal representation of flags in scsi_devices which removes space wasting bools in favour of single bit flags and to add a flag to force a runtime resume which is used by ATA devices" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Fix system start for ATA devices scsi: Change SCSI device boolean fields to single bit flags scsi: ufs: core: Clear cmd if abort succeeds in MCQ mode

scsi: sd: Fix system start for ATA devices

2023-11-25T01:44:21Z

It is not always possible to keep a device in the runtime suspended state when a system level suspend/resume cycle is executed. E.g. for ATA devices connected to AHCI adapters, system resume resets the ATA ports, which causes connected devices to spin up. In such case, a runtime suspended disk will incorrectly be seen with a suspended runtime state because the device is not resumed by sd_resume_system(). The power state seen by the user is different than the actual device physical power state. Fix this issue by introducing the struct scsi_device flag force_runtime_start_on_system_start. When set, this flag causes sd_resume_system() to request a runtime resume operation for runtime suspended devices. This results in the user seeing the device runtime_state as active after a system resume, thus correctly reflecting the device physical power state. Fixes: 9131bff6a9f1 ("scsi: core: pm: Only runtime resume if necessary") Cc: Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org Signed-off-by: Martin K. Petersen

scsi: Change SCSI device boolean fields to single bit flags

2023-11-25T01:44:21Z

Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") changed the single bit manage_start_stop flag into 2 boolean fields of the SCSI device structure. Commit 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") introduced the manage_shutdown boolean field for the same structure. Together, these 2 commits increase the size of struct scsi_device by 8 bytes by using booleans instead of defining the manage_xxx fields as single bit flags, similarly to other flags of this structure. Avoid this unnecessary structure size increase and be consistent with the definition of other flags by reverting the definitions of the manage_xxx fields as single bit flags. Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Fixes: 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") Cc: Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org Reviewed-by: Niklas Cassel Signed-off-by: Martin K. Petersen

ata: pata_isapnp: Add missing error check for devm_ioport_map()

2023-11-20T00:22:26Z

Add missing error return check for devm_ioport_map() and return the error if this function call fails. Fixes: 0d5ff566779f ("libata: convert to iomap") Signed-off-by: Chen Ni Reviewed-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

ata: pata_gayle: Convert to platform remove callback returning void

2023-11-08T00:00:49Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Reviewed-by: Sergey Shtylyov Reviewed-by: Niklas Cassel Signed-off-by: Damien Le Moal

ata: pata_falcon: Convert to platform remove callback returning void

2023-11-08T00:00:44Z

ata: pata_gayle: Stop using module_platform_driver_probe()

2023-11-08T00:00:37Z

On today's platforms the benefit of platform_driver_probe() isn't that relevant any more. It allows to drop some code after booting (or module loading) for .probe() and discard the .remove() function completely if the driver is built-in. This typically saves a few 100k. The downside of platform_driver_probe() is that the driver cannot be bound and unbound at runtime which is ancient and so slightly complicates testing. There are also thoughts to deprecate platform_driver_probe() because it adds some complexity in the driver core for little gain. Also many drivers don't use it correctly. This driver for example misses to mark the driver struct with __ref which is needed to suppress a (W=1) modpost warning. Signed-off-by: Uwe Kleine-König Reviewed-by: Sergey Shtylyov Reviewed-by: Niklas Cassel Signed-off-by: Damien Le Moal

ata: pata_falcon: Stop using module_platform_driver_probe()

2023-11-08T00:00:03Z

ata: libata-core: Fix ata_pci_shutdown_one()

2023-11-07T23:53:55Z

This reverts commit 5b6fba546da246b3d0dd8465c07783e22629cc53. Commit 5b6fba546da2 ("ata: libata-core: Detach a port devices on shutdown") modified the function ata_pci_shutdown_one() to stop (suspend) devices attached to the ports of a PCI AHCI adapter to ensure that drives are spun down before shutting down a system. However, this is done only for PCI adapters and not for other types of adapters. This limitation was addressed with commit 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag"). With this, all ATA disks are spun down on system shutdown, which make the changes introduced with 5b6fba546da2 useless. Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel

Merge tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2023-11-01T22:50:12Z

Pull ATA updates from Damien Le Moal: - Modify the AHCI driver to print the link power management policy used on scan, to help with debugging issues (Niklas) - Add support for the ASM2116 series adapters to the AHCI driver (Szuying) - Prepare libata for the coming gcc and Clang __counted_by attribute (Kees) - Following the recent estensive fixing of libata suspend/resume handling, several patches further cleanup and improve disk power state management (me) - Reduce the verbosity of some error messages for non-fatal temporary errors, e.g. slow response to device reset when scanning a port, and warning messages that are in fact normal, e.g. disabling a device on suspend or when removing it (me) - Cleanup DMA helper functions (me) - Fix sata_mv drive handling of potential errors durring probe (Ma) - Cleanup the xgene and imx drivers using the functions of_device_get_match_data() and device_get_match_data() (Rob) - Improve the tegra driver device tree (Rob) * tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (22 commits) dt-bindings: ata: tegra: Disallow undefined properties ata: libata-core: Improve ata_dev_power_set_active() ata: libata-eh: Spinup disk on resume after revalidation ata: imx: Use device_get_match_data() ata: xgene: Use of_device_get_match_data() ata: sata_mv: aspeed: fix value check in mv_platform_probe() ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list ata: libata: Cleanup inline DMA helper functions ata: libata-eh: Reduce "disable device" message verbosity ata: libata-eh: Improve reset error messages ata: libata-sata: Improve ata_sas_slave_configure() ata: libata-core: Do not resume runtime suspended ports ata: libata-core: Do not poweroff runtime suspended ports ata: libata-core: Remove ata_port_resume_async() ata: libata-core: Remove ata_port_suspend_async() ata: libata-core: Detach a port devices on shutdown ata: libata-core: Synchronize ata_port_detach() with hotplug ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat() scsi: Remove scsi device no_start_on_resume flag ata: libata: Annotate struct ata_cpr_log with __counted_by ...