pm24.git/drivers/cpuidle, branch v6.12

Merge tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm

2024-09-18T08:49:45Z

Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Add support for s2idle for CPU PM domains on PREEMPT_RT - Add device managed version of dev_pm_domain_attach|detach_list() - Improve layout of the debugfs summary table pmdomain providers: - amlogic: Remove obsolete vpu domain driver - bcm: raspberrypi: Add support for devices used as wakeup-sources - imx: Fixup clock handling for imx93 at driver remove - rockchip: Add gating support for RK3576 - rockchip: Add support for RK3576 SoC - Some OF parsing simplifications - Some simplifications by using dev_err_probe() and guard() pmdomain consumers: - qcom/media/venus: Convert to the device managed APIs for PM domains cpuidle-psci: - Add support for s2idle/s2ram for the hierarchical topology on PREEMPT_RT - Some OF parsing simplifications" * tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (39 commits) pmdomain: core: Reduce debug summary table width pmdomain: core: Move mode_status_str() pmdomain: core: Fix "managed by" alignment in debug summary pmdomain: core: Harden inter-column space in debug summary pmdomain: rockchip: Add gating masks for rk3576 pmdomain: rockchip: Add gating support pmdomain: rockchip: Simplify dropping OF node reference pmdomain: mediatek: make use of dev_err_cast_probe() pmdomain: imx93-pd: drop the context variable "init_off" pmdomain: imx93-pd: don't unprepare clocks on driver remove pmdomain: imx93-pd: replace dev_err() with dev_err_probe() pmdomain: qcom: rpmpd: Simplify locking with guard() pmdomain: qcom: rpmhpd: Simplify locking with guard() pmdomain: qcom: cpr: Simplify locking with guard() pmdomain: qcom: cpr: Simplify with dev_err_probe() pmdomain: imx: gpcv2: Simplify with scoped for each OF child loop pmdomain: imx: gpc: Simplify with scoped for each OF child loop pmdomain: rockchip: SimplUlf Hanssonify locking with guard() pmdomain: rockchip: Simplify with scoped for each OF child loop pmdomain: qcom-cpr: Use scope based of_node_put() to simplify code. ...

cpuidle: remove dead code from cpuidle_enter_state()

2024-08-22T19:03:52Z

Checking for index < 0 is useless because the find_deepest_state() function never really returns a negative value. Since this hasn't been reported in over 9 years it's dead code, so remove it. Signed-off-by: Dhruva Gole Link: https://patch.msgid.link/20240821114250.1416421-1-d-gole@ti.com [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki

cpuidle: riscv-sbi: Simplify with scoped for each OF child loop

2024-08-20T19:46:43Z

Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by: Jonathan Cameron Signed-off-by: Krzysztof Kozlowski Reviewed-by: Anup Patel Link: https://patch.msgid.link/20240820094023.61155-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rafael J. Wysocki

cpuidle: riscv-sbi: Use scoped device node handling to fix missing of_node_put

2024-08-20T19:46:43Z

Two return statements in sbi_cpuidle_dt_init_states() did not drop the OF node reference count. Solve the issue and simplify entire error handling with scoped/cleanup.h. Fixes: 6abf32f1d9c5 ("cpuidle: Add RISC-V SBI CPU idle driver") Cc: All applicable Signed-off-by: Krzysztof Kozlowski Reviewed-by: Anup Patel Link: https://patch.msgid.link/20240820094023.61155-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rafael J. Wysocki

cpuidle: dt_idle_genpd: Simplify with scoped for each OF child loop

2024-08-20T09:30:39Z

Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Jonathan Cameron Link: https://lore.kernel.org/r/20240816150931.142208-4-krzysztof.kozlowski@linaro.org Signed-off-by: Ulf Hansson

cpuidle: psci: Simplify with scoped for each OF child loop

2024-08-20T09:30:39Z

Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Jonathan Cameron Link: https://lore.kernel.org/r/20240816150931.142208-1-krzysztof.kozlowski@linaro.org Signed-off-by: Ulf Hansson

cpuidle: psci: Enable the hierarchical topology for s2idle on PREEMPT_RT

2024-08-05T11:25:45Z

To enable the domain-idle-states to be used during s2idle on a PREEMPT_RT based configuration, let's allow the re-assignment of the ->enter_s2idle() callback to psci_enter_s2idle_domain_idle_state(). Similar to s2ram, let's leave the support for CPU hotplug outside PREEMPT_RT, as it's depending on using runtime PM. For s2idle, this means that an offline CPU's PM domain will remain powered-on. In practise this may lead to that a shallower idle-state than necessary gets selected, which shouldn't be an issue (besides wasting power). Signed-off-by: Ulf Hansson Tested-by: Raghavendra Kakarla # qcm6490 with PREEMPT_RT set Acked-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20240527142557.321610-8-ulf.hansson@linaro.org

cpuidle: psci: Enable the hierarchical topology for s2ram on PREEMPT_RT

2024-08-05T11:24:47Z

The hierarchical PM domain topology are currently disabled on a PREEMPT_RT based configuration. As a first step to enable it to be used, let's try to attach the CPU devices to their PM domains on PREEMPT_RT. In this way the syscore ops becomes available, allowing the PM domain topology to be managed during s2ram. For the moment let's leave the support for CPU hotplug outside PREEMPT_RT, as it's depending on using runtime PM. For s2ram, this isn't a problem as all CPUs are managed via the syscore ops. Signed-off-by: Ulf Hansson Tested-by: Raghavendra Kakarla # qcm6490 with PREEMPT_RT set Acked-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20240527142557.321610-7-ulf.hansson@linaro.org

cpuidle: psci: Drop redundant assignment of CPUIDLE_FLAG_RCU_IDLE

2024-08-05T11:24:28Z

When using the hierarchical topology and PSCI OSI-mode we may end up overriding the deepest idle-state's ->enter|enter_s2idle() callbacks, but there is no point to also re-assign the CPUIDLE_FLAG_RCU_IDLE for the idle-state in question, as that has already been set when parsing the states from DT. See init_state_node(). Signed-off-by: Ulf Hansson Tested-by: Raghavendra Kakarla # qcm6490 with PREEMPT_RT set Acked-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20240527142557.321610-6-ulf.hansson@linaro.org

cpuidle: psci-domain: Enable system-wide suspend on PREEMPT_RT

2024-08-05T11:23:34Z

The domain-idle-states are currently disabled on a PREEMPT_RT based configuration for the cpuidle-psci-domain. To enable them to be used for system-wide suspend and in particular during s2idle, let's set the GENPD_FLAG_RPM_ALWAYS_ON instead of GENPD_FLAG_ALWAYS_ON for the corresponding genpd provider. In this way, the runtime PM path remains disabled in genpd for its attached devices, while powering-on/off the PM domain during system-wide suspend becomes allowed. Signed-off-by: Ulf Hansson Tested-by: Raghavendra Kakarla # qcm6490 with PREEMPT_RT set Acked-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20240527142557.321610-5-ulf.hansson@linaro.org