pm24.git/drivers/firmware/arm_ffa, branch v6.4

firmware: arm_ffa: Set handle field to zero in memory descriptor

2023-06-06T12:41:56Z

As described in the commit 111a833dc5cb ("firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors") some fields in the memory descriptor have to be zeroed explicitly. The handle field is one of these, but it was left out from that change, fix this now. Fixes: 111a833dc5cb ("firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors") Reported-by: Imre Kis Signed-off-by: Balint Dobszay Link: https://lore.kernel.org/r/20230601140749.93812-1-balint.dobszay@arm.com Signed-off-by: Sudeep Holla

firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors

2023-05-08T19:40:46Z

The transmit buffers allocated by the driver can be used to transmit data by any messages/commands needing the buffer. However, it is not guaranteed to have been zero-ed before every new transmission and hence it will just contain residual value from the previous transmission. There are several reserved fields in the memory descriptors that must be zero(MBZ). The receiver can reject the transmission if any such MBZ fields are non-zero. While we can set the whole page to zero, it is not optimal as most of the fields get initialised to the value required for the current transmission. So, just set the reserved/MBZ fields to zero in the memory descriptors explicitly to honour the requirement and keep the receiver happy. Fixes: cc2195fe536c ("firmware: arm_ffa: Add support for MEM_* interfaces") Reported-by: Marc Bonnici Link: https://lore.kernel.org/r/20230503131252.12585-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla

firmware: arm_ffa: Fix FFA device names for logical partitions

2023-05-08T19:40:46Z

Each physical partition can provide multiple services each with UUID. Each such service can be presented as logical partition with a unique combination of VM ID and UUID. The number of distinct UUID in a system will be less than or equal to the number of logical partitions. However, currently it fails to register more than one logical partition or service within a physical partition as the device name contains only VM ID while both VM ID and UUID are maintained in the partition information. The kernel complains with the below message: | sysfs: cannot create duplicate filename '/devices/arm-ffa-8001' | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8 | Hardware name: FVP Base RevC (DT) | Call trace: | dump_backtrace+0xf8/0x118 | show_stack+0x18/0x24 | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | sysfs_create_dir_ns+0xe0/0x13c | kobject_add_internal+0x220/0x3d4 | kobject_add+0x94/0x100 | device_add+0x144/0x5d8 | device_register+0x20/0x30 | ffa_device_register+0x88/0xd8 | ffa_setup_partitions+0x108/0x1b8 | ffa_init+0x2ec/0x3a4 | do_one_initcall+0xcc/0x240 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x100/0x16c | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 | kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to | register things with the same name in the same directory. | arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17 | ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001 By virtue of being random enough to avoid collisions when generated in a distributed system, there is no way to compress UUID keys to the number of bits required to identify each. We can eliminate '-' in the name but it is not worth eliminating 4 bytes and add unnecessary logic for doing that. Also v1.0 doesn't provide the UUID of the partitions which makes it hard to use the same for the device name. So to keep it simple, let us alloc an ID using ida_alloc() and append the same to "arm-ffa" to make up a unique device name. Also stash the id value in ffa_dev to help freeing the ID later when the device is destroyed. Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Reported-by: Lucian Paul-Trifu Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-3-d9108e43a176@arm.com Signed-off-by: Sudeep Holla

firmware: arm_ffa: Fix usage of partition info get count flag

2023-05-08T19:40:46Z

Commit bb1be7498500 ("firmware: arm_ffa: Add v1.1 get_partition_info support") adds support to discovery the UUIDs of the partitions or just fetch the partition count using the PARTITION_INFO_GET_RETURN_COUNT_ONLY flag. However the commit doesn't handle the fact that the older version doesn't understand the flag and must be MBZ which results in firmware returning invalid parameter error. That results in the failure of the driver probe which is in correct. Limit the usage of the PARTITION_INFO_GET_RETURN_COUNT_ONLY flag for the versions above v1.0(i.e v1.1 and onwards) which fixes the issue. Fixes: bb1be7498500 ("firmware: arm_ffa: Add v1.1 get_partition_info support") Reported-by: Jens Wiklander Reported-by: Marc Bonnici Tested-by: Jens Wiklander Reviewed-by: Jens Wiklander Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-2-d9108e43a176@arm.com Signed-off-by: Sudeep Holla

firmware: arm_ffa: Check if ffa_driver remove is present before executing

2023-05-08T19:40:46Z

Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194 Fixes: 244f5d597e1e ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type") Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-1-d9108e43a176@arm.com Signed-off-by: Sudeep Holla

driver core: make struct bus_type.uevent() take a const *

2023-01-27T12:45:52Z

The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki Acked-by: Hans de Goede Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

firmware: arm_ffa: Move constants to header file

2022-12-01T15:51:31Z

FF-A function IDs and error codes will be needed in the hypervisor too, so move to them to the header file where they can be shared. Rename the version constants with an "FFA_" prefix so that they are less likely to clash with other code in the tree. Co-developed-by: Andrew Walbran Signed-off-by: Andrew Walbran Signed-off-by: Quentin Perret Reviewed-by: Sudeep Holla Link: https://lore.kernel.org/r/20221116170335.2341003-2-qperret@google.com Signed-off-by: Will Deacon

firmware: arm_ffa: Split up ffa_ops into info, message and memory operations

2022-09-08T10:34:04Z

In preparation to make memory operations accessible for a non ffa_driver/device, it is better to split the ffa_ops into different categories of operations: info, message and memory. The info and memory are ffa_device independent and can be used without any associated ffa_device from a non ffa_driver. However, we don't export these info and memory APIs yet without the user. The first users of these APIs can export them. Link: https://lore.kernel.org/r/20220907145240.1683088-11-sudeep.holla@arm.com Reviewed-by: Jens Wiklander Signed-off-by: Sudeep Holla

firmware: arm_ffa: Set up 32bit execution mode flag using partiion property

2022-09-08T10:33:15Z

FF-A v1.1 adds a flag in the partition properties to indicate if the partition runs in the AArch32 or AArch64 execution state. Use the same to set-up the 32-bit execution flag mode in the ffa_dev automatically if the detected firmware version is above v1.0 and ignore any requests to do the same from the ffa_driver. Link: https://lore.kernel.org/r/20220907145240.1683088-10-sudeep.holla@arm.com Signed-off-by: Sudeep Holla

firmware: arm_ffa: Add v1.1 get_partition_info support

2022-09-08T10:30:35Z

FF-A v1.1 adds support to discovery the UUIDs of the partitions that was missing in v1.0 and which the driver workarounds by using UUIDs supplied by the ffa_drivers. Add the v1.1 get_partition_info support and disable the workaround if the detected FF-A version is greater than v1.0. Link: https://lore.kernel.org/r/20220907145240.1683088-9-sudeep.holla@arm.com Reviewed-by: Jens Wiklander Signed-off-by: Sudeep Holla