pm24.git/drivers/gpio, branch perf-mon

gpio: GPIO_GRGPIO should depend on OF

2025-02-05T13:37:53Z

While the Aeroflex Gaisler GRGPIO driver has no build-time dependency on gpiolib-of, it supports only DT-based configuration, and is used only on DT systems. Hence add a dependency on OF, to prevent asking the user about this driver when configuring a kernel without DT support. Fixes: bc40668def384256 ("gpio: grgpio: drop Kconfig dependency on OF_GPIO") Signed-off-by: Geert Uytterhoeven Reviewed-by: Andreas Larsson Link: https://lore.kernel.org/r/db6da3d11bf850d89f199e5c740d8f133e38078d.1738760539.git.geert+renesas@glider.be Signed-off-by: Bartosz Golaszewski

gpio: sim: lock hog configfs items if present

2025-02-05T13:37:01Z

Depending on the user config, the leaf entry may be the hog directory, not line. Check it and lock the correct item. Fixes: 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on") Tested-by: Koichiro Den Link: https://lore.kernel.org/r/20250203110123.87701-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski

gpio: pca953x: Improve interrupt support

2025-02-04T20:21:03Z

The GPIO drivers with latch interrupt support (typically types starting with PCAL) have interrupt status registers to determine which particular inputs have caused an interrupt. Unfortunately there is no atomic operation to read these registers and clear the interrupt. Clearing the interrupt is done by reading the input registers. The code was reading the interrupt status registers, and then reading the input registers. If an input changed between these two events it was lost. The solution in this patch is to revert to the non-latch version of code, i.e. remembering the previous input status, and looking for the changes. This system results in no more I2C transfers, so is no slower. The latch property of the device still means interrupts will still be noticed if the input changes back to its initial state. Fixes: 44896beae605 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2") Signed-off-by: Mark Tomlinson Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240606033102.2271916-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Bartosz Golaszewski

Merge tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2025-01-30T18:19:30Z

Pull gpio fixes from Bartosz Golaszewski: - update gpio-sim selftests to not fail now that we no longer allow rmdir() on configfs entries of active devices - remove leftover code from gpio-mxc * tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: selftests: gpio: gpio-sim: Fix missing chip disablements gpio: mxc: remove dead code after switch to DT-only

Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2025-01-28T20:25:12Z

Pull driver core and debugfs updates from Greg KH: "Here is the big set of driver core and debugfs updates for 6.14-rc1. Included in here is a bunch of driver core, PCI, OF, and platform rust bindings (all acked by the different subsystem maintainers), hence the merge conflict with the rust tree, and some driver core api updates to mark things as const, which will also require some fixups due to new stuff coming in through other trees in this merge window. There are also a bunch of debugfs updates from Al, and there is at least one user that does have a regression with these, but Al is working on tracking down the fix for it. In my use (and everyone else's linux-next use), it does not seem like a big issue at the moment. Here's a short list of the things in here: - driver core rust bindings for PCI, platform, OF, and some i/o functions. We are almost at the "write a real driver in rust" stage now, depending on what you want to do. - misc device rust bindings and a sample driver to show how to use them - debugfs cleanups in the fs as well as the users of the fs api for places where drivers got it wrong or were unnecessarily doing things in complex ways. - driver core const work, making more of the api take const * for different parameters to make the rust bindings easier overall. - other small fixes and updates All of these have been in linux-next with all of the aforementioned merge conflicts, and the one debugfs issue, which looks to be resolved "soon"" * tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits) rust: device: Use as_char_ptr() to avoid explicit cast rust: device: Replace CString with CStr in property_present() devcoredump: Constify 'struct bin_attribute' devcoredump: Define 'struct bin_attribute' through macro rust: device: Add property_present() saner replacement for debugfs_rename() orangefs-debugfs: don't mess with ->d_name octeontx2: don't mess with ->d_parent or ->d_parent->d_name arm_scmi: don't mess with ->d_parent->d_name slub: don't mess with ->d_name sof-client-ipc-flood-test: don't mess with ->d_name qat: don't mess with ->d_name xhci: don't mess with ->d_iname mtu3: don't mess wiht ->d_iname greybus/camera - stop messing with ->d_iname mediatek: stop messing with ->d_iname netdevsim: don't embed file_operations into your structs b43legacy: make use of debugfs_get_aux() b43: stop embedding struct file_operations into their objects carl9170: stop embedding file_operations into their objects ...

gpio: mxc: remove dead code after switch to DT-only

2025-01-23T07:44:51Z

struct platform_device::id was only set by board code, but since i.MX became a devicetree-only platform, this will always be -1 (PLATFORM_DEVID_NONE). Note: of_alias_get_id() returns a negative number on error and base treats all negative errors the same, so we need not add any additional error handling. Fixes: 0f2c7af45d7e ("gpio: mxc: Convert the driver to DT-only") Signed-off-by: Ahmad Fatoum Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20250113-b4-imx-gpio-base-warning-v1-3-0a28731a5cf6@pengutronix.de Signed-off-by: Bartosz Golaszewski

Merge tag 'gpio-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2025-01-22T16:47:54Z

Pull gpio updates from Bartosz Golaszewski: "Thanks to little activity in December, this is really tiny. Just a few updates to drivers and device-tree bindings. Driver improvements: - support a new model in gpio-mpc8xxx - refactor gpio-tqmx86 and add support for direction setting - allow building gpio-omap with COMPILE_TEST=y - use gpiochip_get_data() instead of dev_get_drvdata() in gpio-twl6040 - drop unued field from driver data in gpio-altera - use generic request/free callbacks in gpio-regmap for better integration with pinctrl - use dev_err_probe() where applicable in gpio-pca953x - use existing dedicated GPIO defines in gpio-tps65219 instead of custom ones DT bindings: - document a new model in fsl,qoriq-gpio - explain the chip's latch clock pin and how it works like chip-select in fairchild,74hc595 - enable the gpio-line-names property for gpio-brcmstb" * tag 'gpio-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: regmap: Use generic request/free ops gpio: altera: Drop .mapped_irq from driver data gpio: mpc8xxx: Add MPC8314 support dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,mpc8314-gpio dt-bindings: gpio: fairchild,74hc595: Document chip select vs. latch clock gpio: tps65219: Use existing kernel gpio macros gpio: pca953x: log an error when failing to get the reset GPIO dt-bindings: gpio: brcmstb: permit gpio-line-names property gpio: tqmx86: add support for changing GPIO directions gpio: tqmx86: introduce tqmx86_gpio_clrsetbits() helper gpio: tqmx86: use cleanup guards for spinlock gpio: tqmx86: consistently refer to IRQs by hwirq numbers gpio: tqmx86: add macros for interrupt configuration gpio: omap: allow building the module with COMPILE_TEST=y gpio: twl4030: use gpiochip_get_data

gpio: xilinx: Convert gpio_lock to raw spinlock

2025-01-14T13:04:38Z

irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) Fixes: a32c7caea292 ("gpio: gpio-xilinx: Add interrupt support") Signed-off-by: Sean Anderson Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250110163354.2012654-1-sean.anderson@linux.dev Signed-off-by: Bartosz Golaszewski

gpio: regmap: Use generic request/free ops

2025-01-13T08:20:25Z

Set the gpiochip request and free ops to the generic implementations. This way a user can provide a gpio-ranges property defined for a pinmux, easing muxing of gpio functions. Provided that the pin controller implementents the pinmux op .gpio_request_enable(), pins will automatically be muxed to their GPIO function when requested. Signed-off-by: Sander Vanheule Acked-by: Michael Walle Link: https://lore.kernel.org/r/20250107201621.12467-1-sander@svanheule.net Signed-off-by: Bartosz Golaszewski

gpio: altera: Drop .mapped_irq from driver data

2025-01-13T08:20:25Z

struct altera_gpio_chip::mapped_irq is only used in the driver's probe function. So it's enough if mapped_irq is a local variable, and can be dropped from driver data. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20250109090802.3763275-2-u.kleine-koenig@baylibre.com Signed-off-by: Bartosz Golaszewski