pm24.git/drivers/gpu/drm/msm, branch v5.16

Merge tag 'net-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-12-09T19:26:44Z

Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, can and netfilter. Current release - regressions: - bpf, sockmap: re-evaluate proto ops when psock is removed from sockmap Current release - new code bugs: - bpf: fix bpf_check_mod_kfunc_call for built-in modules - ice: fixes for TC classifier offloads - vrf: don't run conntrack on vrf with !dflt qdisc Previous releases - regressions: - bpf: fix the off-by-two error in range markings - seg6: fix the iif in the IPv6 socket control block - devlink: fix netns refcount leak in devlink_nl_cmd_reload() - dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's" - dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports Previous releases - always broken: - ethtool: do not perform operations on net devices being unregistered - udp: use datalen to cap max gso segments - ice: fix races in stats collection - fec: only clear interrupt of handling queue in fec_enet_rx_queue() - m_can: pci: fix incorrect reference clock rate - m_can: disable and ignore ELO interrupt - mvpp2: fix XDP rx queues registering Misc: - treewide: add missing includes masked by cgroup -> bpf.h dependency" * tag 'net-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits) net: dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports net: wwan: iosm: fixes unable to send AT command during mbim tx net: wwan: iosm: fixes net interface nonfunctional after fw flash net: wwan: iosm: fixes unnecessary doorbell send net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering MAINTAINERS: s390/net: remove myself as maintainer net/sched: fq_pie: prevent dismantle issue net: mana: Fix memory leak in mana_hwc_create_wq seg6: fix the iif in the IPv6 socket control block nfp: Fix memory leak in nfp_cpp_area_cache_add() nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done nfc: fix segfault in nfc_genl_dump_devices_done udp: using datalen to cap max gso segments net: dsa: mv88e6xxx: error handling for serdes_power functions can: kvaser_usb: get CAN clock frequency from device can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter net: mvpp2: fix XDP rx queues registering vmxnet3: fix minimum vectors alloc issue net, neigh: clear whole pneigh_entry at alloc time net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's" ...

treewide: Add missing includes masked by cgroup -> bpf dependency

2021-12-03T18:58:13Z

cgroup.h (therefore swap.h, therefore half of the universe) includes bpf.h which in turn includes module.h and slab.h. Since we're about to get rid of that dependency we need to clean things up. v2: drop the cpu.h include from cacheinfo.h, it's not necessary and it makes riscv sensitive to ordering of include files. Signed-off-by: Jakub Kicinski Signed-off-by: Alexei Starovoitov Reviewed-by: Christoph Hellwig Acked-by: Krzysztof Wilczyński Acked-by: Peter Chen Acked-by: SeongJae Park Acked-by: Jani Nikula Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/all/20211120035253.72074-1-kuba@kernel.org/ # v1 Link: https://lore.kernel.org/all/20211120165528.197359-1-kuba@kernel.org/ # cacheinfo discussion Link: https://lore.kernel.org/bpf/20211202203400.1208663-1-kuba@kernel.org

drm: msm: fix building without CONFIG_COMMON_CLK

2021-11-26T16:58:57Z

When CONFIG_COMMON_CLOCK is disabled, the 8996 specific phy code is left out, which results in a link failure: ld: drivers/gpu/drm/msm/hdmi/hdmi_phy.o:(.rodata+0x3f0): undefined reference to `msm_hdmi_phy_8996_cfg' This was only exposed after it became possible to build test the driver without the clock interfaces. Make COMMON_CLK a hard dependency for compile testing, and simplify it a little based on that. Fixes: b3ed524f84f5 ("drm/msm: allow compile_test on !ARM") Reported-by: Randy Dunlap Suggested-by: Geert Uytterhoeven Signed-off-by: Arnd Bergmann Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20211013144308.2248978-1-arnd@kernel.org Signed-off-by: Rob Clark

drm/msm: Do hw_init() before capturing GPU state

2021-11-22T18:45:55Z

In particular, we need to ensure all the necessary blocks are switched to 64b mode (a5xx+) otherwise the high bits of the address of the BO to snapshot state into will be ignored, resulting in: *** gpu fault: ttbr0=0000000000000000 iova=0000000000012000 dir=READ type=TRANSLATION source=CP (0,0,0,0) platform 506a000.gmu: [drm:a6xx_gmu_set_oob] *ERROR* Timeout waiting for GMU OOB set BOOT_SLUMBER: 0x0 Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state") Signed-off-by: Rob Clark Link: https://lore.kernel.org/r/20211108180122.487859-1-robdclark@gmail.com Signed-off-by: Rob Clark

drm/msm/dp: Avoid unpowered AUX xfers that caused crashes

2021-11-22T18:16:05Z

If you happened to try to access `/dev/drm_dp_aux` devices provided by the MSM DP AUX driver too early at bootup you could go boom. Let's avoid that by only allowing AUX transfers when the controller is powered up. Specifically the crash that was seen (on Chrome OS 5.4 tree with relevant backports): Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 0 PID: 3131 Comm: fwupd Not tainted 5.4.144-16620-g28af11b73efb #1 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Call trace: dump_backtrace+0x0/0x14c show_stack+0x20/0x2c dump_stack+0xac/0x124 panic+0x150/0x390 nmi_panic+0x80/0x94 arm64_serror_panic+0x78/0x84 do_serror+0x0/0x118 do_serror+0xa4/0x118 el1_error+0xbc/0x160 dp_catalog_aux_write_data+0x1c/0x3c dp_aux_cmd_fifo_tx+0xf0/0x1b0 dp_aux_transfer+0x1b0/0x2bc drm_dp_dpcd_access+0x8c/0x11c drm_dp_dpcd_read+0x64/0x10c auxdev_read_iter+0xd4/0x1c4 I did a little bit of tracing and found that: * We register the AUX device very early at bootup. * Power isn't actually turned on for my system until hpd_event_thread() -> dp_display_host_init() -> dp_power_init() * You can see that dp_power_init() calls dp_aux_init() which is where we start allowing AUX channel requests to go through. In general this patch is a bit of a bandaid but at least it gets us out of the current state where userspace acting at the wrong time can fully crash the system. * I think the more proper fix (which requires quite a bit more changes) is to power stuff on while an AUX transfer is happening. This is like the solution we did for ti-sn65dsi86. This might be required for us to move to populating the panel via the DP-AUX bus. * Another fix considered was to dynamically register / unregister. I tried that at but it got ugly. Currently there's a bug where the pm_runtime() state isn't tracked properly and that causes us to just keep registering more and more. Signed-off-by: Douglas Anderson Reviewed-by: Kuogee Hsieh Reviewed-by: Abhinav Kumar Link: https://lore.kernel.org/r/20211109100403.1.I4e23470d681f7efe37e2e7f1a6466e15e9bb1d72@changeid Signed-off-by: Rob Clark

drm/msm/dsi: set default num_data_lanes

2021-11-22T18:16:04Z

If "data_lanes" property of the dsi output endpoint is missing in the DT, num_data_lanes would be 0 by default, which could cause dsi_host_attach() to fail if dsi->lanes is set to a non-zero value by the bridge driver. According to the binding document of msm dsi controller, the input/output endpoint of the controller is expected to have 4 lanes. So let's set num_data_lanes to 4 by default. Signed-off-by: Philip Chen Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20211030100812.1.I6cd9af36b723fed277d34539d3b2ba4ca233ad2d@changeid Signed-off-by: Rob Clark

drm/msm/gpu: Fix check for devices without devfreq

2021-11-21T20:56:51Z

Looks like 658f4c829688 ("drm/msm/devfreq: Add 1ms delay before clamping freq") was badly rebased on top of efb8a170a367 ("drm/msm: Fix devfreq NULL pointer dereference on a3xx") and ended up with the NULL check in the wrong place. Fixes: 658f4c829688 ("drm/msm/devfreq: Add 1ms delay before clamping freq") Signed-off-by: Rob Clark Link: https://lore.kernel.org/r/20211120200103.1051459-2-robdclark@gmail.com Signed-off-by: Rob Clark

drm/msm/gpu: Fix idle_work time

2021-11-21T20:56:30Z

This was supposed to be a relative timer, not absolute. Fixes: 658f4c829688 ("drm/msm/devfreq: Add 1ms delay before clamping freq") Signed-off-by: Rob Clark Reviewed-by: Douglas Anderson Link: https://lore.kernel.org/r/20211120200103.1051459-1-robdclark@gmail.com Signed-off-by: Rob Clark

drm/msm/a6xx: Fix uinitialized use of gpu_scid

2021-11-21T20:55:26Z

Avoid a possible uninitialized use of gpu_scid variable to fix the below smatch warning: drivers/gpu/drm/msm/adreno/a6xx_gpu.c:1480 a6xx_llc_activate() error: uninitialized symbol 'gpu_scid'. Reported-by: Dan Carpenter Signed-off-by: Akhil P Oommen Link: https://lore.kernel.org/r/20211118154903.3.Ie4ac321feb10168af569d9c2b4cf6828bed8122c@changeid Signed-off-by: Rob Clark

drm/msm: Fix null ptr access msm_ioctl_gem_submit()

2021-11-21T20:54:22Z

Fix the below null pointer dereference in msm_ioctl_gem_submit(): 26545.260705: Call trace: 26545.263223: kref_put+0x1c/0x60 26545.266452: msm_ioctl_gem_submit+0x254/0x744 26545.270937: drm_ioctl_kernel+0xa8/0x124 26545.274976: drm_ioctl+0x21c/0x33c 26545.278478: drm_compat_ioctl+0xdc/0xf0 26545.282428: __arm64_compat_sys_ioctl+0xc8/0x100 26545.287169: el0_svc_common+0xf8/0x250 26545.291025: do_el0_svc_compat+0x28/0x54 26545.295066: el0_svc_compat+0x10/0x1c 26545.298838: el0_sync_compat_handler+0xa8/0xcc 26545.303403: el0_sync_compat+0x188/0x1c0 26545.307445: Code: d503201f d503201f 52800028 4b0803e8 (b8680008) 26545.318799: Kernel panic - not syncing: Oops: Fatal exception Signed-off-by: Akhil P Oommen Link: https://lore.kernel.org/r/20211118154903.2.I3ae019673a0cc45d83a193a7858748dd03dbb820@changeid Signed-off-by: Rob Clark