pm24.git/drivers/gpu/drm/renesas, branch master

Get rid of 'remove_new' relic from platform driver struct

2024-12-01T23:12:43Z

The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds

drm/renesas/shmobile: Run DRM default client setup

2024-09-26T07:31:27Z

Call drm_client_setup_with_fourcc() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. v5: - select DRM_CLIENT_SELECTION v2: - use drm_client_setup_with_fourcc() Signed-off-by: Thomas Zimmermann Cc: Laurent Pinchart Cc: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Reviewed-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-36-tzimmermann@suse.de

drm/renesas/rz-du: Run DRM default client setup

2024-09-26T07:31:18Z

Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. The rz-du driver specifies a preferred color mode of 32. As this is the default if no format has been given, leave it out entirely. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann Cc: Biju Das Tested-by: Biju Das Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-35-tzimmermann@suse.de

drm/renesas/rcar-du: Run DRM default client setup

2024-09-26T06:28:10Z

Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. The rcar-du driver specifies a preferred color mode of 32. As this is the default if no format has been given, leave it out entirely. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann Cc: Laurent Pinchart Cc: Kieran Bingham Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-34-tzimmermann@suse.de

drm: renesas: rcar-du: Add drm_panic support for non-vsp

2024-09-24T14:15:44Z

Add support for the drm_panic module for DU variants not using the VSP-compositor, to display a message on the screen when a kernel panic occurs. Signed-off-by: Geert Uytterhoeven Reviewed-by: Jocelyn Falempe Acked-by: Sui Jingfeng Link: https://patchwork.freedesktop.org/patch/msgid/b633568d2e3f405b21debdd60854fe39780254d6.1716816897.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard

drm: renesas: shmobile: Add drm_panic support

2024-09-24T14:15:33Z

Add support for the drm_panic module, which displays a message on the screen when a kernel panic occurs. Signed-off-by: Geert Uytterhoeven Reviewed-by: Jocelyn Falempe Acked-by: Sui Jingfeng Link: https://patchwork.freedesktop.org/patch/msgid/292638fde9aef8b00e984245f43dc02a818cf322.1716816827.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard

Merge v6.11-rc7 into drm-next

2024-09-11T07:18:15Z

Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary") in drm-misc, so start the backmerge cascade. Signed-off-by: Simona Vetter

drm/bridge-connector: move to DRM_DISPLAY_HELPER module

2024-09-03T08:18:31Z

drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard Acked-by: Maxime Ripard Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard

drm: renesas: rz-du: Add RZ/G2UL DU Support

2024-08-26T09:47:04Z

The LCD controller is composed of Frame Compression Processor (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU). It has DPI interface and supports a maximum resolution of WXGA along with 2 RPFs to support the blending of two picture layers and raster operations (ROPs). The DU module is connected to VSPD. Add RZ/G2UL DU support. Signed-off-by: Biju Das Reviewed-by: Laurent Pinchart Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20240822162320.5084-3-biju.das.jz@bp.renesas.com

drm: renesas: Move RZ/G2L MIPI DSI driver to rz-du

2024-08-26T09:47:04Z

All the RZ/G2L DU specific components are located under the rz-du folder, so it makes sense to move the RZ/G2L MIPI DSI driver there instead of keeping it in the rcar-du folder. This change improves the organization and modularity of the driver configuration by grouping related settings together. Signed-off-by: Lad Prabhakar Acked-by: Biju Das Reviewed-by: Laurent Pinchart Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20240625123244.200533-1-prabhakar.mahadev-lad.rj@bp.renesas.com