pm24.git/drivers/gpu/drm/scheduler/sched_main.c, branch v5.7

drm/scheduler: fix drm_sched_get_cleanup_job

2020-04-15T09:09:13Z

We are racing to initialize sched->thread here, just always check the current thread. Signed-off-by: Christian König Reviewed-by: Andrey Grodzovsky Reviewed-by: Kent Russell Link: https://patchwork.freedesktop.org/patch/361303/

drm/scheduler: fix rare NULL ptr race

2020-03-25T21:00:11Z

There is one one corner case at dma_fence_signal_locked which will raise the NULL pointer problem just like below. ->dma_fence_signal ->dma_fence_signal_locked ->test_and_set_bit here trigger dma_fence_release happen due to the zero of fence refcount. ->dma_fence_put ->dma_fence_release ->drm_sched_fence_release_scheduled ->call_rcu here make the union fled “cb_list” at finished fence to NULL because struct rcu_head contains two pointer which is same as struct list_head cb_list Therefore, to hold the reference of finished fence at drm_sched_process_job to prevent the null pointer during finished fence dma_fence_signal [ 732.912867] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 732.914815] #PF: supervisor write access in kernel mode [ 732.915731] #PF: error_code(0x0002) - not-present page [ 732.916621] PGD 0 P4D 0 [ 732.917072] Oops: 0002 [#1] SMP PTI [ 732.917682] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 5.4.0-rc7 #1 [ 732.918980] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 732.920906] RIP: 0010:dma_fence_signal_locked+0x3e/0x100 [ 732.938569] Call Trace: [ 732.939003] [ 732.939364] dma_fence_signal+0x29/0x50 [ 732.940036] drm_sched_fence_finished+0x12/0x20 [gpu_sched] [ 732.940996] drm_sched_process_job+0x34/0xa0 [gpu_sched] [ 732.941910] dma_fence_signal_locked+0x85/0x100 [ 732.942692] dma_fence_signal+0x29/0x50 [ 732.943457] amdgpu_fence_process+0x99/0x120 [amdgpu] [ 732.944393] sdma_v4_0_process_trap_irq+0x81/0xa0 [amdgpu] v2: hold the finished fence at drm_sched_process_job instead of amdgpu_fence_process v3: resume the blank line Signed-off-by: Yintian Tao Reviewed-by: Christian König Signed-off-by: Alex Deucher

drm/sched: implement and export drm_sched_pick_best

2020-03-16T20:21:32Z

Remove drm_sched_entity_get_free_sched() and use the logic of picking the least loaded drm scheduler from a drm scheduler list to implement drm_sched_pick_best(). This patch also exports drm_sched_pick_best() so that it can be utilized by other drm drivers. Signed-off-by: Nirmoy Das Reviewed-by: Christian König Signed-off-by: Alex Deucher

Revert "drm/scheduler: improve job distribution with multiple queues"

2020-03-16T20:21:32Z

It needs to revert this patch to avoid amdgpu_test compute hang problem on picasso. This reverts commit 56822db194232c089601728d68ed078dccb97f8b. Signed-off-by: changzhu Reviewed-by: Feifei Xu Signed-off-by: Alex Deucher

drm/scheduler: fix inconsistent locking of job_list_lock

2020-03-13T15:52:36Z

1db8c142b6c5 (drm/scheduler: Add drm_sched_suspend/resume_timeout()) made the job_list_lock IRQ safe in as the suspend/resume calls were expected to be called from IRQ context. This usage never materialized in upstream. Instead amdgpu started locking the job_list_lock in an IRQ unsafe way in amdgpu_ib_preempt_mark_partial_job() and amdgpu_ib_preempt_job_recovery(), which leads to potential deadlock if one would actually start to call the drm_sched_suspend/resume_timeout functions from IRQ context. As no current user needs the locking to be IRQ safe, the local IRQ disable/enable is pure overhead. Fix the inconsistent locking by changing all uses of job_list_lock to use the IRQ unsafe locking primitives. Reviewed-by: Christian König Signed-off-by: Lucas Stach Signed-off-by: Alex Deucher

drm/sched: add run job trace

2020-03-13T15:52:36Z

Add a new trace event to show when jobs are run on the HW. Acked-by: Christian König Signed-off-by: Robert Beckett Signed-off-by: Lucas Stach Signed-off-by: Alex Deucher

drm/scheduler: improve job distribution with multiple queues

2020-01-16T18:37:54Z

This patch uses score based logic to select a new rq for better loadbalance between multiple rq/scheds instead of num_jobs. Below are test results after running amdgpu_test from mesa drm Before this patch: sched_name num of many times it got scheduled ========= ================================== sdma0 314 sdma1 32 comp_1.0.0 56 comp_1.0.1 0 comp_1.1.0 0 comp_1.1.1 0 comp_1.2.0 0 comp_1.2.1 0 comp_1.3.0 0 comp_1.3.1 0 After this patch: sched_name num of many times it got scheduled ========= ================================== sdma0 216 sdma1 185 comp_1.0.0 39 comp_1.0.1 9 comp_1.1.0 12 comp_1.1.1 0 comp_1.2.0 12 comp_1.2.1 0 comp_1.3.0 12 comp_1.3.1 0 Signed-off-by: Nirmoy Das Reviewed-by: Christian König Signed-off-by: Alex Deucher

Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2019-12-17T12:57:54Z

drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

drm/scheduler: Avoid accessing freed bad job.

2019-11-27T15:05:49Z

Problem: Due to a race between drm_sched_cleanup_jobs in sched thread and drm_sched_job_timedout in timeout work there is a possiblity that bad job was already freed while still being accessed from the timeout thread. Fix: Instead of just peeking at the bad job in the mirror list remove it from the list under lock and then put it back later when we are garanteed no race with main sched thread is possible which is after the thread is parked. v2: Lock around processing ring_mirror_list in drm_sched_cleanup_jobs. v3: Rebase on top of drm-misc-next. v2 is not needed anymore as drm_sched_get_cleanup_job already has a lock there. v4: Fix comments to relfect latest code in drm-misc. Signed-off-by: Andrey Grodzovsky Reviewed-by: Christian König Reviewed-by: Emily Deng Tested-by: Emily Deng Signed-off-by: Christian König Link: https://patchwork.freedesktop.org/patch/342356

drm/sched: Avoid job cleanup if sched thread is parked.

2019-11-07T23:08:07Z

When the sched thread is parked we assume ring_mirror_list is not accessed from here. Signed-off-by: Andrey Grodzovsky Reviewed-by: Christian König Signed-off-by: Alex Deucher