pm24.git/drivers/gpu/drm/v3d, branch master

Merge tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel

2024-12-06T19:52:15Z

Pull drm fixes from Dave Airlie: "Pretty quiet week which is probably expected after US holidays, the dma-fence and displayport MST message handling fixes make up the bulk of this, along with a couple of minor xe and other driver fixes. dma-fence: - Fix reference leak on fence-merge failure path - Simplify fence merging with kernel's sort() - Fix dma_fence_array_signaled() to ensure forward progress dp_mst: - Fix MST sideband message body length check - Fix a bunch of locking/state handling with DP MST msgs sti: - Add __iomem for mixer_dbg_mxn()'s parameter xe: - Missing init value and 64-bit write-order check - Fix a memory allocation issue causing lockdep violation v3d: - Performance counter fix" * tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel: drm/v3d: Enable Performance Counters before clearing them drm/dp_mst: Use reset_msg_rx_state() instead of open coding it drm/dp_mst: Reset message rx state after OOM in drm_dp_mst_handle_up_req() drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req() drm/dp_mst: Fix down request message timeout handling drm/dp_mst: Simplify error path in drm_dp_mst_handle_down_rep() drm/dp_mst: Verify request type in the corresponding down message reply drm/dp_mst: Fix resetting msg rx state after topology removal drm/xe: Move the coredump registration to the worker thread drm/xe/guc: Fix missing init value and add register order check drm/sti: Add __iomem for mixer_dbg_mxn's parameter drm/dp_mst: Fix MST sideband message body length check dma-buf: fix dma_fence_array_signaled v4 dma-fence: Use kernel's sort for merging fences dma-fence: Fix reference leak on fence merge failure path

Merge tag 'drm-misc-fixes-2024-12-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

2024-12-05T22:40:47Z

drm-misc-fixes v6.13-rc2: - v3d performance counter fix. - A lot of DP-MST related fixes. Signed-off-by: Dave Airlie From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/2ce1650d-801f-4265-a876-5a8743f1c82b@linux.intel.com

drm/v3d: Enable Performance Counters before clearing them

2024-12-05T17:27:57Z

On the Raspberry Pi 5, performance counters are not being cleared when `v3d_perfmon_start()` is called, even though we write to the CLR register. As a result, their values accumulate until they overflow. The expected behavior is for performance counters to reset to zero at the start of a job. When the job finishes and the perfmon is stopped, the counters should accurately reflect the values for that specific job. To ensure this behavior, the performance counters are now enabled before being cleared. This allows the CLR register to function as intended, zeroing the counter values when the job begins. Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal Reviewed-by: Iago Toral Quiroga Link: https://patchwork.freedesktop.org/patch/msgid/20241204122831.17015-1-mcanal@igalia.com

Get rid of 'remove_new' relic from platform driver struct

2024-12-01T23:12:43Z

The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds

Backmerge v6.12-rc6 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

2024-11-04T04:25:33Z

Backmerge Linus tree for some drm-fixes needed for msm and xe merges. Signed-off-by: Dave Airlie

drm/v3d: Drop allocation of object without mountpoint

2024-10-30T13:21:05Z

Function drm_gem_shmem_create_with_mnt() creates an object without using the mountpoint if gemfs is NULL. Drop the else branch calling drm_gem_shmem_create(). Signed-off-by: Matthias Brugger Signed-off-by: Maíra Canal Link: https://patchwork.freedesktop.org/patch/msgid/20241029-v3d-v2-1-c0d3dd328d1b@gmail.com

drm/v3d: Stop the active perfmon before being destroyed

2024-10-07T12:03:57Z

When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: stable@vger.kernel.org # v5.15+ Closes: https://github.com/raspberrypi/linux/issues/6389 Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal Reviewed-by: Juan A. Suarez Link: https://patchwork.freedesktop.org/patch/msgid/20241004130625.918580-2-mcanal@igalia.com

Merge drm/drm-next into drm-misc-next

2024-09-30T08:50:54Z

Get drm-misc-next to up v6.12-rc1. Signed-off-by: Thomas Zimmermann

drm/v3d: Expose Super Pages capability

2024-09-25T11:40:26Z

Add a new V3D parameter to expose the support of Super Pages to userspace. The userspace might want to know this information to apply optimizations that are specific to kernels with Super Pages enabled. Signed-off-by: Maíra Canal Reviewed-by: Iago Toral Quiroga Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-12-mcanal@igalia.com

drm/v3d: Add modparam for turning off Big/Super Pages

2024-09-25T11:40:25Z

Add a modparam for turning off Big/Super Pages to make sure that if an user doesn't want Big/Super Pages enabled, it can disabled it by setting the modparam to false. Signed-off-by: Maíra Canal Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-11-mcanal@igalia.com