pm24.git/drivers/i2c/busses/Kconfig, branch master

Merge tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2024-11-21T21:19:29Z

Pull i2c updates from Wolfram Sang: "Core: - drivers can now use a GPIO as a side channel for SMBus Alerts using a generic binding - regular stuff like mem leak fix, Makefile maintenance... Host improvements and refactoring: - All controllers using the 'remove_new' callback have been reverted to use the 'remove' callback - Intel SCH controller underwent significant refactoring, this brings love and a modern look to the driver - PIIX4 driver refactored to enable usage by other drivers (e.g., AMD ASF) - iMX/MXC improved message handling to reduce protocol overhead: Refactored DMA/non-DMA read/write and bus polling mechanisms to achieve this. - ACPI documentation for PIIX4 New host features: - i2c-cadence support for atomic transfers - Qualcomm CII support for a 32MHz serial engine clock Deprecated features: - Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If somebody misses this, Jean will rewrite support using the proper i2c mux framework. New hardware IDs for existing drivers: - Intel Panther Lake - S32G2/S32G3 SoCs - HJMC01 DesignWare ACPI HID - PIC64GX to Microchip Core - Qualcomm SDM670 to Qualcomm CCI New drivers: - AMD ASF - Realtek RTL I2C Controller at24 updates: - add support for the lockable page on ST M24256E" * tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits) docs: i2c: piix4: Add ACPI section i2c: Add driver for the RTL9300 I2C controller i2c: qcom-cci: Remove unused struct member cci_clk_rate dt-bindings: i2c: Add Realtek RTL I2C Controller i2c: busses: Use *-y instead of *-objs in Makefile i2c: imx: add support for S32G2/S32G3 SoCs dt-bindings: i2c: imx: add SoC specific compatible strings for S32G i2c: qcom-cci: Remove the unused variable cci_clk_rate i2c: Drop legacy muxing pseudo-drivers i2c: imx: prevent rescheduling in non dma mode i2c: imx: separate atomic, dma and non-dma use case i2c: imx: do not poll for bus busy in single master mode i2c: designware: Add a new ACPI HID for HJMC01 I2C controller i2c: qcom-geni: Keep comment why interrupts start disabled dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver i2c: designware: constify abort_sources i2c: Switch back to struct platform_driver::remove() i2c: qcom-geni: Support systems with 32MHz serial engine clock i2c: qcom-cci: Stop complaining about DT set clock rate dt-bindings: i2c: qcom-cci: Document SDM670 compatible ...

i2c: Add driver for the RTL9300 I2C controller

2024-11-17T10:58:57Z

Add support for the I2C controller on the RTL9300 SoC. There are two I2C controllers in the RTL9300 that are part of the Ethernet switch register block. Each of these controllers owns a SCL pin (GPIO8 for the fiorst I2C controller, GPIO17 for the second). There are 8 possible SDA pins (GPIO9-16) that can be assigned to either I2C controller. This relationship is represented in the device tree with a child node for each SDA line in use. This is based on the openwrt implementation[1] but has been significantly modified [1] - https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c Signed-off-by: Chris Packham Reviewed-by: Andi Shyti Signed-off-by: Andi Shyti

i2c: busses: Use -y instead of -objs in Makefile

2024-11-17T10:58:56Z

*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. While at it, fix an obvious typo in help section of the Kconfig. Signed-off-by: Andy Shevchenko Signed-off-by: Andi Shyti

i2c: imx: add support for S32G2/S32G3 SoCs

2024-11-17T10:58:56Z

Some S32G2/S32G3 SoC I2C particularities exist such as different pairs. Those are addressed by adding specific S32G2 and S32G3 compatible strings. Co-developed-by: Ionut Vicovan Signed-off-by: Ionut Vicovan Signed-off-by: Ciprian Marian Costea Reviewed-by: Frank Li Signed-off-by: Andi Shyti

i2c: Drop legacy muxing pseudo-drivers

2024-11-17T10:58:14Z

The i2c-amd756-s4882 and i2c-nforce2-s4985 muxing pseudo-drivers were written at a time when the i2c core did not support muxing. They are essentially board-specific hacks. If we had to add support for these boards today, we would implement it in a completely different way. These Tyan server boards are 19 years old by now, so I very much doubt any of these is still running today. So let's just drop this clumsy code. If anyone really still needs this support and complains, I'll rewrite it in a proper way on top of i2c-mux. This also fixes the following warnings: drivers/i2c/busses/i2c-amd756.c:286:20: warning: symbol 'amd756_smbus' was not declared. Should it be static? drivers/i2c/busses/i2c-nforce2.c:123:20: warning: symbol 'nforce2_smbus' was not declared. Should it be static? Signed-off-by: Jean Delvare Cc: Andi Shyti Cc: Nick Desaulniers Acked-by: Wolfram Sang Signed-off-by: Andi Shyti

i2c: amd-asf: Add i2c_algorithm operations to support AMD ASF with SMBus

2024-11-13T22:29:46Z

Implement the i2c_algorithm operations to enable support for AMD ASF (Alert Standard Format) with SMBus. This enhancement includes: - Adding functionality to identify and select the supported ASF functions. - Implementing mechanisms for registering and deregistering I2C slave devices. - Providing support for data transfer operations over ASF. Additionally, include a 'select' Kconfig entry as the current patch utilizes .reg_slave() and .unreg_slave() callbacks, which are controlled by CONFIG_I2C_SLAVE. Reviewed-by: Andy Shevchenko Co-developed-by: Sanket Goswami Signed-off-by: Sanket Goswami Signed-off-by: Shyam Sundar S K Signed-off-by: Andi Shyti

i2c: amd-asf: Add ACPI support for AMD ASF Controller

2024-11-13T22:29:46Z

The AMD ASF controller is presented to the operating system as an ACPI device. The AMD ASF driver can use ACPI to obtain information about the ASF controller's attributes, such as the ASF address space and interrupt number, and to handle ASF interrupts. Currently, the piix4 driver assumes that a specific port address is designated for AUX operations. However, with the introduction of ASF, the same port address may also be used by the ASF controller. Therefore, a check needs to be added to ensure that if ASF is advertised and enabled in ACPI, the AUX port should not be configured. Reviewed-by: Andy Shevchenko Co-developed-by: Sanket Goswami Signed-off-by: Sanket Goswami Signed-off-by: Shyam Sundar S K Signed-off-by: Andi Shyti

i2c: i801: Add support for Intel Panther Lake

2024-11-13T22:29:46Z

Add SMBus PCI IDs on Intel Panther Lake-P and -U. Signed-off-by: Jarkko Nikula Signed-off-by: Andi Shyti

i2c: Congatec Board Controller i2c bus driver

2024-10-09T15:32:08Z

Add i2c support for the Congatec Board Controller. The Board Controller has two i2c busses, a General Purpose bus and a Power Management bus. Acked-by: Andi Shyti Signed-off-by: Thomas Richard Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-3-39ceceed5c47@bootlin.com Signed-off-by: Lee Jones

i2c: keba: I2C_KEBA should depend on KEBA_CP500

2024-09-27T09:48:11Z

The KEBA I2C controller is only present on KEBA PLC devices. Hence add a dependency on KEBA_CP500, to prevent asking the user about this driver when configuring a kernel without KEBA CP500 system FPGA support. Fixes: c7e08c816cd2fdf8 ("i2c: keba: Add KEBA I2C controller support") Signed-off-by: Geert Uytterhoeven Reviewed-by: Gerhard Engleder Signed-off-by: Andi Shyti