pm24.git/drivers/iio, branch rust-6.8

Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2023-11-04T00:51:08Z

Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.7-rc1. Included in here are: - IIO subsystem driver updates and additions (largest part of this pull request) - FPGA subsystem driver updates - Counter subsystem driver updates - ICC subsystem driver updates - extcon subsystem driver updates - mei driver updates and additions - nvmem subsystem driver updates and additions - comedi subsystem dependency fixes - parport driver fixups - cdx subsystem driver and core updates - splice support for /dev/zero and /dev/full - other smaller driver cleanups All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits) cdx: add sysfs for subsystem, class and revision cdx: add sysfs for bus reset cdx: add support for bus enable and disable cdx: Register cdx bus as a device on cdx subsystem cdx: Create symbol namespaces for cdx subsystem cdx: Introduce lock to protect controller ops cdx: Remove cdx controller list from cdx bus system dts: ti: k3-am625-beagleplay: Add beaglecc1352 greybus: Add BeaglePlay Linux Driver dt-bindings: net: Add ti,cc1352p7 dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax Revert "nvmem: add new config option" MAINTAINERS: coresight: Add missing Coresight files misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition uacce: make uacce_class constant ocxl: make ocxl_class constant cxl: make cxl_class constant misc: phantom: make phantom_class constant ...

Merge tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2023-10-20T05:54:15Z

Jonathan writes: IIO: 1st set of new device support, features and cleanup for 6.7 Particularly great to see a resolver driver move out of staging via a massive set of changes. Only took 13 years :) One small patch added then reverted due to a report of test breakage (ashai-kasei,ak8975: Drop deprecated enums.) An immutable branch was used for some hid-senors changes in case there was a need to take them into the HID tree as well. New device support ----------------- adi,hmc425a - Add support for HMC540SLP3E broadband 4-bit digital attenuator. kionix,kx022a - Add support for the kx132-1211 accelerometer. Require significant driver rework to enable this including add a chip type specific structure to deal with the chip differences. - Add support for the kx132acr-lbz accelerometer (subset of the kx022a feature set). lltc,ltc2309 - New driver for this 8 channel ADC. microchip,mcp3911 - Add support for rest of mcp391x family of ADCs (there are various differences beyond simple channel count variation. Series includes some general driver cleanup. microchip,mcp3564 - New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564 and their R variants of 16/24bit ADCs. A few minor fixed followed. rohm,bu1390 - New driver for this pressure sensor. Staging graduation ------------------ adi,ad1210 (after 13 or so years :) - More or less a complete (step-wise) rewrite of this resolver driver to bring it up to date with modern IIO standards. The fault signal handling mapping to event channels was particularly complex and significant part of the changes. Features -------- iio-core - Add chromacity and color temperature channel types. adi,ad7192 - Oversampling ratio control (called fast settling in datasheet). adi,adis16475 - Add core support and then driver support for delta angle and delta velocity channels. These are intended for summation to establish angle and velocity changes over larger timescales. Fix was needed for alignment after the temperature channel. Further fix reduced set of devices for which the buffer support was applicable as seems burst reads don't cover these on all devices. hid-sensors-als - Chromacity and color temperatures support including in amd sfh. stx104 - Add support for counter subsystem to this multipurpose device. ti,twl6030 - Add missing device tree binding description. Clean up and minor fixes. ------------------------ treewide - Drop some unused declarations across IIO. - Make more use of device_get_match_data() instead of OF specific approaches. Similar cleanup to sets of drivers. - Stop platform remove callbacks returning anything by using the temporary remove_new() callback. - Use i2c_get_match_data() to cope nicely with all types of ID table entry. - Use device_get_match_data() for various platform device to cope with more types of firmware. - Convert from enum to pointer in ID tables allowing use of i2c_get_match_data(). - Fix sorting on some ID tables. - Include specific string helper headers rather than simply string_helpers.h docs - Better description of the ordering requirements etc for available_scan_masks. tools - Handle alignment of mixed sizes where the last element isn't the biggest correctly. Seems that doesn't happen often! adi,ad2s1210 - Lots of work from David Lechner on this driver including a few fixes that are going with the rework to avoid slowing that down. adi,ad4310 - Replace deprecated devm_clk_register() adi,ad74413r - Bring the channel function setting inline with the datasheet. adi,ad7192 - Change to FIELD_PREP(), FIELD_GET(). - Calculate f_order from the sinc filter and chop filter states. - Move more per chip config into data in struct ad7192_chip_info - Cleanup unused parameter in channel macros. adi,adf4350 - Make use of devm_* to simplify error handling for many of the setup calls in probe() / tear down in remove() and error paths. Some more work to be done on this one. - Use dev_err_probe() for errors in probe() callback. adi,adf4413 - Typo in function name prefix. adi,adxl345 - Add channel scale to the chip type specific structure and drop using a type field previously used for indirection. asahi,ak8985 - Fix a mismatch introduced when switching from enum->pointers in the match tables. amlogic,meson - Expand error logging during probe. invensense,mpu6050 - Support level-shifter control. Whilst no one is sure exactly what this is doing it is needed for some old boards. - Document mount-matrix dt-binding. mediatek,mt6577 - Use devm_clk_get_enabled() to replace open coded version and move everything over to being device managed. Drop now empty remove() callback. Fix follows to put the drvdata back. - Use dev_err_probe() for error reporting in probe() callback. memsic,mxc4005 - Add of_match_table. microchip,mcp4725 - Move various chip specific data from being looked up by chip ID to data in the chip type specific structure. silicon-labs,si7005 - Add of_match_table and entry in trivial-devices.yaml st,lsm6dsx - Add missing mount-matrix dt binding documentation. st,spear - Use devm_clk_get_enabled() and some other devm calls to move everything over to being device managed. Drop now empty remove() callback. - Use dev_err_probe() to better handled deferred probing and tidy up error reporting in probe() callback. st,stm32-adc - Add a bit of additional checking in probe() to protect against a NULL pointer (no known path to trigger it today). - Replace deprecated strncpy() ti,ads1015 - Allow for edge triggers. - Document interrupt in dt-bindings. * tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits) iio: Use device_get_match_data() iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero. dt-bindings: trivial-devices: add silabs,si7005 iio: si7005: Add device tree support drivers: imu: adis16475.c: Remove scan index from delta channels dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property iio: resolver: ad2s1210: remove of_match_ptr() iio: resolver: ad2s1210: remove DRV_NAME macro iio: resolver: ad2s1210: move out of staging staging: iio: resolver: ad2s1210: simplify code with guard(mutex) staging: iio: resolver: ad2s1210: clear faults after soft reset staging: iio: resolver: ad2s1210: refactor sample toggle staging: iio: resolver: ad2s1210: remove fault attribute staging: iio: resolver: ad2s1210: add label attribute support staging: iio: resolver: ad2s1210: add register/fault support summary staging: iio: resolver: ad2s1210: implement fault events iio: event: add optional event label support staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr ...

iio: afe: rescale: Accept only offset channels

2023-10-17T19:25:32Z

As noted by Jonathan Cameron: it is perfectly legal for a channel to have an offset but no scale in addition to the raw interface. The conversion will imply that scale is 1:1. Make rescale_configure_channel() accept just scale, or just offset to process a channel. When a user asks for IIO_CHAN_INFO_OFFSET in rescale_read_raw() we now have to deal with the fact that OFFSET could be present but SCALE missing. Add code to simply scale 1:1 in this case. Link: https://lore.kernel.org/linux-iio/CACRpkdZXBjHU4t-GVOCFxRO-AHGxKnxMeHD2s4Y4PuC29gBq6g@mail.gmail.com/ Fixes: 53ebee949980 ("iio: afe: iio-rescale: Support processed channels") Fixes: 9decacd8b3a4 ("iio: afe: rescale: Fix boolean logic bug") Reported-by: Jonathan Cameron Signed-off-by: Linus Walleij Reviewed-by: Peter Rosin Link: https://lore.kernel.org/r/20230902-iio-rescale-only-offset-v2-1-988b807754c8@linaro.org Cc: Signed-off-by: Jonathan Cameron

iio: exynos-adc: request second interupt only when touchscreen mode is used

2023-10-14T16:47:20Z

Second interrupt is needed only when touchscreen mode is used, so don't request it unconditionally. This removes the following annoying warning during boot: exynos-adc 14d10000.adc: error -ENXIO: IRQ index 1 not found Fixes: 2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support") Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20231009101412.916922-1-m.szyprowski@samsung.com Cc: Signed-off-by: Jonathan Cameron

iio: Use device_get_match_data()

2023-10-14T16:18:36Z

Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20231006224440.442864-1-robh@kernel.org Signed-off-by: Jonathan Cameron

iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.

2023-10-14T16:17:25Z

The patch 33ec3e5fc1ea: "iio: adc: adding support for MCP3564 ADC" leads to the following Smatch static checker warning: smatch warnings: drivers/iio/adc/mcp3564.c:1105 mcp3564_fill_scale_tbls() warn: unsigned '__x' is never less than zero. vim +/__x +1105 drivers/iio/adc/mcp3564.c 1094 1095 static void mcp3564_fill_scale_tbls(struct mcp3564_state *adc) 1096 { ..... 1103 for (i = 0; i < MCP3564_MAX_PGA; i++) { 1104 ref = adc->vref_mv; > 1105 tmp1 = shift_right((u64)ref * NANO, pow); 1106 div_u64_rem(tmp1, NANO, &tmp0); 1107 ..... 1113 } Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202309280738.NWjVfVt4-lkp@intel.com/ Fixes: 33ec3e5fc1ea (iio: adc: adding support for MCP3564 ADC) Signed-off-by: Marius Cristea Link: https://lore.kernel.org/r/20231013132333.10582-1-marius.cristea@microchip.com Signed-off-by: Jonathan Cameron

iio: si7005: Add device tree support

2023-10-14T16:12:21Z

This device supports ACPI detection but lacks of the device tree counterpart. Add device tree support. Signed-off-by: Javier Carrasco Link: https://lore.kernel.org/r/20231012-topic-si7005_devicetree-v1-1-6c8a6fa7b3ec@gmail.com Signed-off-by: Jonathan Cameron

drivers: imu: adis16475.c: Remove scan index from delta channels

2023-10-14T16:04:08Z

Some devices do not support delta angle and delta velocity burst readings, which means there should be no buffer support for these types of channels. A new list of channels is created which contains the delta channels structures with the scan index equal to -1 to allow for raw register readings, without buffer support. This list of channels is assigned to the devices which do not support delta angle and delta velocity burst readings. Fixes: 8f6bc87d67c0 ("iio: imu: adis16475.c: Add delta angle and delta velocity channels") Signed-off-by: Ramona Gradinariu Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20231012122456.765709-2-ramona.gradinariu@analog.com Signed-off-by: Jonathan Cameron

iio: resolver: ad2s1210: remove of_match_ptr()

2023-10-14T12:53:45Z

To be consistent with the rest of iio, remove of_match_ptr(). It does not do anything useful here. Suggested-by: Jonathan Cameron Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20231012-ad2s1210-mainline-v1-2-b2ee31c0e9dd@baylibre.com Signed-off-by: Jonathan Cameron

iio: resolver: ad2s1210: remove DRV_NAME macro

2023-10-14T12:53:45Z

The DRV_NAME macro is only used in one place in the ad2s1210 driver and is not really needed so let's remove it. Suggested-by: Jonathan Cameron Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20231012-ad2s1210-mainline-v1-1-b2ee31c0e9dd@baylibre.com Signed-off-by: Jonathan Cameron