pm24.git/drivers/input, branch v4.2-rc1

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-07-04T15:14:22Z

Pull second round of input updates from Dmitry Torokhov: "A new driver for Weida wdt87xx touch controllers, and a bunch of fixups for other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wdt87xx_i2c - add a scaling factor for TOUCH_MAJOR event Input: wdt87xx_i2c - remove stray newline in diagnostic message Input: arc_ps2 - add HAS_IOMEM dependency Input: wdt87xx_i2c - fix format warning Input: improve parsing OF parameters for touchscreens Input: edt-ft5x06 - mark as direct input device Input: use for_each_set_bit() where appropriate Input: add a driver for wdt87xx touchscreen controller Input: axp20x-pek - fix reporting button state as inverted Input: xpad - re-send LED command on present event Input: xpad - set the LEDs properly on XBox Wireless controllers Input: imx_keypad - check for clk_prepare_enable() error

Merge branch 'next' into for-linus

2015-07-04T06:56:31Z

Prepare second round of input updates for 4.2 merge window.

Input: wdt87xx_i2c - add a scaling factor for TOUCH_MAJOR event

2015-07-01T18:06:50Z

Get the scaling factor when it reads the sys params. The width value will multiple the factor and report the value in the TOUCH_MAJOR event. Signed-off-by: HungNien Chen Signed-off-by: Dmitry Torokhov

Input: wdt87xx_i2c - remove stray newline in diagnostic message

2015-07-01T18:06:49Z

There is no reason to have a newline between plat_id and xml_id1. Signed-off-by: Dmitry Torokhov

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

2015-07-01T17:49:25Z

Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...

Input: arc_ps2 - add HAS_IOMEM dependency

2015-06-29T19:57:05Z

Fix this compile error: drivers/built-in.o: In function `arc_ps2_probe': /mnt/linux/drivers/input/serio/arc_ps2.c:206: undefined reference to `devm_ioremap_resource' Signed-off-by: Sebastian Ott Signed-off-by: Dmitry Torokhov

Input: wdt87xx_i2c - fix format warning

2015-06-29T19:57:04Z

This fixes the following warning: drivers/input/touchscreen/wdt87xx_i2c.c: In function 'wdt87xx_validate_firmware': >> drivers/input/touchscreen/wdt87xx_i2c.c:472:4: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type 'size_t' [-Wformat=] size, fw->size); Reported-by: kbuild test robot Signed-off-by: Dmitry Torokhov

Merge tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2015-06-26T22:53:22Z

Pull tty/serial driver updates from Greg KH: "Here's the tty and serial driver patches for 4.2-rc1. A number of individual driver updates, some code cleanups, and other minor things, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits) Doc: serial-rs485.txt: update RS485 driver interface Doc: tty.txt: remove mention of the BKL MAINTAINERS: tty: add serial docs directory serial: sprd: check for NULL after calling devm_clk_get serial: 8250_pci: Correct uartclk for xr17v35x expansion chips serial: 8250_pci: Add support for 12 port Exar boards serial: 8250_uniphier: add bindings document for UniPhier UART serial: core: cleanup in uart_get_baud_rate() serial: stm32-usart: Add STM32 USART Driver tty/serial: kill off set_irq_flags usage tty: move linux/gsmmux.h to uapi doc: dt: add documentation for nxp,lpc1850-uart serial: 8250: add LPC18xx/43xx UART driver serial: 8250_uniphier: add UniPhier serial driver serial: 8250_dw: support ACPI platforms with integrated DMA engine serial: of_serial: check the return value of clk_prepare_enable() serial: of_serial: use devm_clk_get() instead of clk_get() serial: earlycon: Add support for big-endian MMIO accesses serial: sirf: use hrtimer for data rx serial: sirf: correct the fifo empty_bit ...

Merge tag 'media/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2015-06-26T00:55:48Z

Pull media updates from Mauro Carvalho Chehab: - Lots of improvements at the DVB API DocBook documentation. Now, the frontend and the network APIs are fully in sync with the Kernel and looks more like the rest of the media documentation; - New frontend driver: cx24120 - New driver for a PCI device: cobalt. This driver is actually not sold in the market, but it is a good example of a multi-HDMI input device; - The dt3155 driver were promoted from staging; - The mantis driver got remote controller support; - New V4L2 driver for ST bdisp SoC chipsets; - Make sparse and smatch happier: several bugs were solved by fixing the issues reported by those static code analyzers. - Lots of new device additions, new features, improvements and cleanups at the existing drivers. * tag 'media/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (553 commits) [media] lmedm04: fix the range for relative measurements [media] lmedm04: use u32 instead of u64 for relative stats [media] omap3isp: remove unused var [media] saa7134: fix page size on some archs [media] use CONFIG_PM_SLEEP for suspend/resume [media] tuner-i2c: be consistent with I2C declaration [media] si470x: cleanup define namespace [media] bdisp: prevent compiling on random arch [media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers [media] MAINTAINERS: Add entry for the Renesas VSP1 driver [media] videodev2.h: fix copy-and-paste error in V4L2_MAP_XFER_FUNC_DEFAULT [media] Revert "[media] vb2: Push mmap_sem down to memops" [media] mantis: cleanup a warning [media] bdisp-debug: don't try to divide by s64 [media] cx88: don't declare restart_video_queue if not used [media] au0828: move dev->boards atribuition to happen earlier [media] lmedm04: implement dvb v5 statistics [media] bdisp: remove unused var [media] bdisp: remove needless check ts2020: fix compilation on i386 ...

Input: improve parsing OF parameters for touchscreens

2015-06-25T21:45:46Z

When applying touchscreen parameters specified in device tree let's make sure we keep whatever setup was done by the driver and not reset the missing values to zero. Reported-by: Pavel Machek Tested-by: Pavel Machek Signed-off-by: Dmitry Torokhov