pm24.git/drivers/input, branch v4.3-rc6

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-10-17T00:39:27Z

Pull input fixes from Dmitry Torokhov: "Just two small fixups to ads7846 touchscreen controller driver and Cypress touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - fix the copy paste error on electrodes_rx value Input: ads7846 - correct the value got from SPI

Input: cyapa - fix the copy paste error on electrodes_rx value

2015-10-14T06:29:52Z

Fix the copy paste error on the electrodes_rx value set code which will cause the electrodes_rx value be always set to the value of electrodes_y. Reported-by: Sudip Mukherjee Signed-off-by: Dudley Du Signed-off-by: Dmitry Torokhov

Input: ads7846 - correct the value got from SPI

2015-10-06T23:39:14Z

According to the touch controller spec, SPI return a 16 bit value, only 12 bits are valid, they are bit[14-3]. The value of MISO and MOSI can be configured when SPI is in idle mode. Currently this touch driver assumes the SPI bus sets the MOSI and MISO in low level when SPI bus is in idle mode. So the bit[15] of the value got from SPI bus is always 0. But when SPI bus congfigures the MOSI and MISO in high level during the SPI idle mode, the bit[15] of the value get from SPI is always 1. If bit[15] is not masked, we may get the wrong value. Mask the invalid bit to make sure the correct value gets returned. Regardless of the SPI bus idle configuration. Signed-off-by: Andrey Gelman Signed-off-by: Haibo Chen Signed-off-by: Igor Grinberg Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-10-02T21:53:25Z

Pull input layer fixes from Dmitry Torokhov: "Fixes for two recent regressions (in Synaptics PS/2 and uinput drivers) and some more driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - fix handling of disabling gesture mode" Input: psmouse - fix data race in __ps2_command Input: elan_i2c - add all valid ic type for i2c/smbus Input: zhenhua - ensure we have BITREVERSE Input: omap4-keypad - fix memory leak Input: serio - fix blocking of parport Input: uinput - fix crash when using ABS events Input: elan_i2c - expand maximum product_id form 0xFF to 0xFFFF Input: elan_i2c - add ic type 0x03 Input: elan_i2c - don't require known iap version Input: imx6ul_tsc - fix controller name Input: imx6ul_tsc - use the preferred method for kzalloc() Input: imx6ul_tsc - check for negative return value Input: imx6ul_tsc - propagate the errors Input: walkera0701 - fix abs() calculations on 64 bit values Input: mms114 - remove unneded semicolons Input: pm8941-pwrkey - remove unneded semicolon Input: fix typo in MT documentation Input: cyapa - fix address of Gen3 devices in device tree documentation

Revert "Input: synaptics - fix handling of disabling gesture mode"

2015-10-02T17:31:32Z

This reverts commit e51e38494a8ecc18650efb0c840600637891de2c: we actually do want the device to work in extended W mode, as this is the mode that allows us receiving multiple contact information. Cc: stable@vger.kernel.org

drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSE

2015-10-02T01:42:35Z

It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in vmlinux. Cc: Fengguang Wu Cc: yalin wang Cc: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Input: psmouse - fix data race in __ps2_command

2015-09-29T23:08:29Z

The data race happens on ps2dev->cmdcnt and ps2dev->cmdbuf contents. __ps2_command reads that data concurrently with the interrupt handler. As the result, for example, if a response arrives just after the timeout, __ps2_command can copy out garbage from ps2dev->cmdbuf but then see that ps2dev->cmdcnt is 0 and return success. Stop the interrupt handler with serio_pause_rx() before reading the results. The data race was found with KernelThreadSanitizer (KTSAN). Signed-off-by: Dmitry Vyukov Signed-off-by: Dmitry Torokhov

Input: elan_i2c - add all valid ic type for i2c/smbus

2015-09-29T00:18:54Z

Signed-off-by: Duson Lin Signed-off-by: Dmitry Torokhov

Input: zhenhua - ensure we have BITREVERSE

2015-09-28T23:42:34Z

It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in vmlinux. Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov

Input: omap4-keypad - fix memory leak

2015-09-28T23:05:45Z

If omap4_keypad_parse_dt() fails we returned the error code but we missed releasing keypad_data. Signed-off-by: Sudip Mukherjee Signed-off-by: Dmitry Torokhov