pm24.git/drivers/md/md-cluster.h, branch v6.8

md-cluster: introduce resync_info_get interface for sanity check

2018-10-18T16:36:35Z

Since the resync region from suspend_info means one node is reshaping this area, so the position of reshape_progress should be included in the area. Reviewed-by: NeilBrown Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li

md-cluster/raid10: resize all the bitmaps before start reshape

2018-10-18T16:30:58Z

To support add disk under grow mode, we need to resize all the bitmaps of each node before reshape, so that we can ensure all nodes have the same view of the bitmap of the clustered raid. So after the master node resized the bitmap, it broadcast a message to other slave nodes, and it checks the size of each bitmap are same or not by compare pages. We can only continue the reshaping after all nodes update the bitmap to the same size (by checking the pages), otherwise revert bitmap size to previous value. The resize_bitmaps interface and BITMAP_RESIZE message are introduced in md-cluster.c for the purpose. Reviewed-by: NeilBrown Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

md-cluster: add the support for resize

2017-03-16T23:55:50Z

To update size for cluster raid, we need to make sure all nodes can perform the change successfully. However, it is possible that some of them can't do it due to failure (bitmap_resize could fail). So we need to consider the issue before we set the capacity unconditionally, and we use below steps to perform sanity check. 1. A change the size, then broadcast METADATA_UPDATED msg. 2. B and C receive METADATA_UPDATED change the size excepts call set_capacity, sync_size is not update if the change failed. Also call bitmap_update_sb to sync sb to disk. 3. A checks other node's sync_size, if sync_size has been updated in all nodes, then send CHANGE_CAPACITY msg otherwise send msg to revert previous change. 4. B and C call set_capacity if receive CHANGE_CAPACITY msg, otherwise pers->resize will be called to restore the old value. Reviewed-by: NeilBrown Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li

md-cluster: gather resync infos and enable recv_thread after bitmap is ready

2016-05-09T16:24:03Z

The in-memory bitmap is not ready when node joins cluster, so it doesn't make sense to make gather_all_resync_info() called so earlier, we need to call it after the node's bitmap is setup. Also, recv_thread could be wake up after node joins cluster, but it could cause problem if node receives RESYNCING message without persionality since mddev->pers->quiesce is called in process_suspend_info. This commit introduces a new cluster interface load_bitmaps to fix above problems, load_bitmaps is called in bitmap_load where bitmap and persionality are ready, and load_bitmaps does the following tasks: 1. call gather_all_resync_info to load all the node's bitmap info. 2. set MD_CLUSTER_ALREADY_IN_CLUSTER bit to recv_thread could be wake up, and wake up recv_thread if there is pending recv event. Then ack_bast only wakes up recv_thread after IN_CLUSTER bit is ready otherwise MD_CLUSTER_PENDING_RESYNC_EVENT is set. Reviewed-by: NeilBrown Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li

md-cluster: append some actions when change bitmap from clustered to none

2016-01-06T00:38:57Z

For clustered raid, we need to do extra actions when change bitmap to none. 1. check if all the bitmap lock could be get or not, if yes then we can continue the change since cluster raid is only active in current node. Otherwise return fail and unlock the related bitmap locks 2. set nodes to 0 and then leave cluster environment. 3. release other nodes's bitmap lock. Signed-off-by: Guoqing Jiang Signed-off-by: NeilBrown

md-cluster: Fix adding of new disk with new reload code

2015-10-12T08:35:30Z

Adding the disk worked incorrectly with the new reload code. Fix it: - No operation should be performed on rdev marked as Candidate - After a metadata update operation, kick disk if role is 0xfffe else clear Candidate bit and continue with the regular change check. - Saving the mode of the lock resource to check if token lock is already locked, because it can be called twice while adding a disk. However, unlock_comm() must be called only once. - add_new_disk() is called by the node initiating the --add operation. If it needs to be canceled, call add_new_disk_cancel(). The operation is completed by md_update_sb() which will write and unlock the communication. Signed-off-by: Goldwyn Rodrigues

md-cluster: Perform resync/recovery under a DLM lock

2015-10-12T08:32:44Z

Resync or recovery must be performed by only one node at a time. A DLM lock resource, resync_lockres provides the mutual exclusion so that only one node performs the recovery/resync at a time. If a node is unable to get the resync_lockres, because recovery is being performed by another node, it set MD_RECOVER_NEEDED so as to schedule recovery in the future. Remove the debug message in resync_info_update() used during development. Signed-off-by: Goldwyn Rodrigues

md-cluster: Use a small window for resync

2015-10-12T06:32:05Z

Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window (32M) is maintained in r1conf as cluster_sync_low and cluster_sync_high and processed in raid1's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Check if the sync will fit in the new window, if not issue a wait_barrier() and set cluster_sync_low to sector_nr. 3. Set cluster_sync_high to cluster_sync_low + resync_window. 4. Send a message to all nodes so they may add it in their suspension list. bitmap_cond_end_sync is modified to allow to force a sync inorder to get the curr_resync_completed uptodate with the sector passed. Signed-off-by: Goldwyn Rodrigues Signed-off-by: NeilBrown

Fix read-balancing during node failure

2015-07-24T03:37:59Z

During a node failure, We need to suspend read balancing so that the reads are directed to the first device and stale data is not read. Suspending writes is not required because these would be recorded and synced eventually. A new flag MD_CLUSTER_SUSPEND_READ_BALANCING is set in recover_prep(). area_resyncing() will respond true for the entire devices if this flag is set and the request type is READ. The flag is cleared in recover_done(). Signed-off-by: Goldwyn Rodrigues Reported-By: David Teigland Signed-off-by: NeilBrown