pm24.git/drivers/net/bonding, branch master

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-11-14T19:29:15Z

Cross-merge networking fixes after downstream PR (net-6.12-rc8). Conflicts: tools/testing/selftests/net/.gitignore 252e01e68241 ("selftests: net: add netlink-dumps to .gitignore") be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw") https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/ drivers/net/phy/phylink.c 671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled") 7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"") Adjacent changes: drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines") e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()") Signed-off-by: Jakub Kicinski

bonding: add ns target multicast address to slave device

2024-11-14T10:16:28Z

Commit 4598380f9c54 ("bonding: fix ns validation on backup slaves") tried to resolve the issue where backup slaves couldn't be brought up when receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only worked for drivers that receive all multicast messages, such as the veth interface. For standard drivers, the NS multicast message is silently dropped because the slave device is not a member of the NS target multicast group. To address this, we need to make the slave device join the NS target multicast group, ensuring it can receive these IPv6 NS messages to validate the slave’s status properly. There are three policies before joining the multicast group: 1. All settings must be under active-backup mode (alb and tlb do not support arp_validate), with backup slaves and slaves supporting multicast. 2. We can add or remove multicast groups when arp_validate changes. 3. Other operations, such as enslaving, releasing, or setting NS targets, need to be guarded by arp_validate. Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu Reviewed-by: Nikolay Aleksandrov Signed-off-by: Paolo Abeni

bonding: add ESP offload features when slaves support

2024-11-08T04:42:38Z

Add NETIF_F_GSO_ESP bit to bond's gso_partial_features if all slaves support it, such that ESP segmentation is handled by hardware if possible. Signed-off-by: Jianbo Liu Reviewed-by: Boris Pismenny Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/20241105192721.584822-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski

bonding: return detailed error when loading native XDP fails

2024-10-28T23:09:42Z

Bonding only supports native XDP for specific modes, which can lead to confusion for users regarding why XDP loads successfully at times and fails at others. This patch enhances error handling by returning detailed error messages, providing users with clearer insights into the specific reasons for the failure when loading native XDP. Reviewed-by: Nikolay Aleksandrov Reviewed-by: Toke Høiland-Jørgensen Signed-off-by: Hangbin Liu Link: https://patch.msgid.link/20241021031211.814-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski

netpoll: remove ndo_netpoll_setup() second argument

2024-10-23T11:31:32Z

npinfo is not used in any of the ndo_netpoll_setup() methods. Signed-off-by: Eric Dumazet Reviewed-by: Simon Horman Link: https://patch.msgid.link/20241018052108.2610827-1-edumazet@google.com Signed-off-by: Paolo Abeni

bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave()

2024-09-24T13:19:50Z

syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce this[1], one bond device (bond1) has xdpdrv, which increases bpf_master_redirect_enabled_key. Another bond device (bond0) which is unsupported by XDP but its slave (veth3) has xdpgeneric that returns XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect(). To reduce unnecessary warnings and improve log management, we need to delete the WARN_ON_ONCE() and add ratelimit to the netdev_err(). [1] Steps to reproduce: # Needs tx_xdp with return XDP_TX; ip l add veth0 type veth peer veth1 ip l add veth3 type veth peer veth4 ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default ip l set veth0 master bond1 ip l set bond1 up # Increases bpf_master_redirect_enabled_key ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx ip l set veth3 master bond0 ip l set bond0 up ip l set veth4 up # Triggers WARN_ON_ONCE() from the xdp_master_redirect() ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx Reported-by: syzbot+c187823a52ed505b2257@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c187823a52ed505b2257 Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver") Signed-off-by: Jiwon Kim Signed-off-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20240918140602.18644-1-jiwonaid0@gmail.com Signed-off-by: Paolo Abeni

bonding: Remove setting of RX software timestamp

2024-09-10T00:44:40Z

The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran Reviewed-by: Rahul Rameshbabu Signed-off-by: Gal Pressman Link: https://patch.msgid.link/20240906144632.404651-4-gal@nvidia.com Signed-off-by: Jakub Kicinski

bonding: support xfrm state update

2024-09-05T10:51:13Z

The patch add xfrm statistics update for bonding IPsec offload. Reviewed-by: Nikolay Aleksandrov Acked-by: Jay Vosburgh Signed-off-by: Hangbin Liu Signed-off-by: Paolo Abeni

bonding: Add ESN support to IPSec HW offload

2024-09-05T10:51:13Z

Currently, users can see that bonding supports IPSec HW offload via ethtool. However, this functionality does not work with NICs like Mellanox cards when ESN (Extended Sequence Numbers) is enabled, as ESN functions are not yet supported. This patch adds ESN support to the bonding IPSec device offload, ensuring proper functionality with NICs that support ESN. Reviewed-by: Nikolay Aleksandrov Acked-by: Jay Vosburgh Signed-off-by: Hangbin Liu Signed-off-by: Paolo Abeni

bonding: add common function to check ipsec device

2024-09-05T10:51:12Z

This patch adds a common function to check the status of IPSec devices. This function will be useful for future implementations, such as IPSec ESN and state offload callbacks. Suggested-by: Nikolay Aleksandrov Reviewed-by: Nikolay Aleksandrov Acked-by: Jay Vosburgh Signed-off-by: Hangbin Liu Signed-off-by: Paolo Abeni