pm24.git/drivers/net/can/dev, branch v6.8

can: netlink: Fix TDCO calculation using the old data bittiming

2024-02-14T12:53:03Z

The TDCO calculation was done using the currently applied data bittiming, instead of the newly computed data bittiming, which means that the TDCO had an invalid value unless setting the same data bittiming twice. Fixes: d99755f71a80 ("can: netlink: add interface for CAN-FD Transmitter Delay Compensation (TDC)") Signed-off-by: Maxime Jayat Reviewed-by: Vincent Mailhol Link: https://lore.kernel.org/all/40579c18-63c0-43a4-8d4c-f3a6c1c0b417@munic.io Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde

netdev: replace napi_reschedule with napi_schedule

2023-10-12T00:28:06Z

Now that napi_schedule return a bool, we can drop napi_reschedule that does the same exact function. The function comes from a very old commit bfe13f54f502 ("ibm_emac: Convert to use napi_struct independent of struct net_device") and the purpose is actually deprecated in favour of different logic. Convert every user of napi_reschedule to napi_schedule. Signed-off-by: Christian Marangi Acked-by: Jeff Johnson # ath10k Acked-by: Nick Child # ibm Acked-by: Marc Kleine-Budde # for can/dev/rx-offload.c Reviewed-by: Eric Dumazet Acked-by: Tariq Toukan Link: https://lore.kernel.org/r/20231009133754.9834-3-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski

can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters

2023-10-05T19:44:48Z

Some CAN controllers do not have a register that contains the current CAN state, but only a register that contains the error counters. Introduce a new function can_state_get_by_berr_counter() that returns the current TX and RX state depending on the provided CAN bit error counters. Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-1-9987d53600e0@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds

2023-10-05T19:34:13Z

If the "struct can_priv::echoo_skb" is accessed out of bounds, this would cause a kernel crash. Instead, issue a meaningful warning message and return with an error. Fixes: a6e4bc530403 ("can: make the number of echo skb's configurable") Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-5-91b5c1fd922c@pengutronix.de Reviewed-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: dev: can_restart(): move debug message and stats after successful restart

2023-10-05T19:33:41Z

Move the debug message "restarted" and the CAN restart stats_after_ the successful restart of the CAN device, because the restart may fail. While there update the error message from printing the error number to printing symbolic error names. Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-4-91b5c1fd922c@pengutronix.de Reviewed-by: Vincent Mailhol [mkl: mention stats in subject and description, too] Signed-off-by: Marc Kleine-Budde

can: dev: can_restart(): reverse logic to remove need for goto

2023-10-05T19:32:45Z

Reverse the logic in the if statement and eliminate the need for a goto to simplify code readability. Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-3-91b5c1fd922c@pengutronix.de Reviewed-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on()

2023-10-05T19:32:26Z

This race condition was discovered while updating the at91_can driver to use can_bus_off(). The following scenario describes how the converted at91_can driver would behave. When a CAN device goes into BUS-OFF state, the driver usually stops/resets the CAN device and calls can_bus_off(). This function sets the netif carrier to off, and (if configured by user space) schedules a delayed work that calls can_restart() to restart the CAN device. The can_restart() function first checks if the carrier is off and triggers an error message if the carrier is OK. Then it calls the driver's do_set_mode() function to restart the device, then it sets the netif carrier to on. There is a race window between these two calls. The at91 CAN controller (observed on the sama5d3, a single core 32 bit ARM CPU) has a hardware limitation. If the device goes into bus-off while sending a CAN frame, there is no way to abort the sending of this frame. After the controller is enabled again, another attempt is made to send it. If the bus is still faulty, the device immediately goes back to the bus-off state. The driver calls can_bus_off(), the netif carrier is switched off and another can_restart is scheduled. This occurs within the race window before the original can_restart() handler marks the netif carrier as OK. This would cause the 2nd can_restart() to be called with an OK netif carrier, resulting in an error message. The flow of the 1st can_restart() looks like this: can_restart() // bail out if netif_carrier is OK netif_carrier_ok(dev) priv->do_set_mode(dev, CAN_MODE_START) // enable CAN controller // sama5d3 restarts sending old message // CAN devices goes into BUS_OFF, triggers IRQ // IRQ handler start at91_irq() at91_irq_err_line() can_bus_off() netif_carrier_off() schedule_delayed_work() // IRQ handler end netif_carrier_on() The 2nd can_restart() will be called with an OK netif carrier and the error message will be printed. To close the race window, first set the netif carrier to on, then restart the controller. In case the restart fails with an error code, roll back the netif carrier to off. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-2-91b5c1fd922c@pengutronix.de Reviewed-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: dev: can_restart(): don't crash kernel if carrier is OK

2023-10-05T19:32:12Z

During testing, I triggered a can_restart() with the netif carrier being OK [1]. The BUG_ON, which checks if the carrier is OK, results in a fatal kernel crash. This is neither helpful for debugging nor for a production system. [1] The root cause is a race condition in can_restart() which will be fixed in the next patch. Do not crash the kernel, issue an error message instead, and continue restarting the CAN device anyway. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-1-91b5c1fd922c@pengutronix.de Reviewed-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde

can: rx-offload: add can_rx_offload_get_echo_skb_queue_tail()

2023-07-28T07:45:25Z

Add can_rx_offload_get_echo_skb_queue_tail(). This function addds the echo skb at the end of rx-offload the queue. This is intended for devices without timestamp support. Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-2-716e542d14d5@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: rx-offload: rename rx_offload_get_echo_skb() -> can_rx_offload_get_echo_skb_queue_timestamp()

2023-07-28T07:45:24Z

Rename the rx_offload_get_echo_skb() function to can_rx_offload_get_echo_skb_queue_timestamp(), since it inserts the echo skb into the rx-offload queue sorted by timestamp. This is a preparation for adding can_rx_offload_get_echo_skb_queue_tail(), which adds the echo skb to the end of the queue. This is intended for devices that do not support timestamps. Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-1-716e542d14d5@pengutronix.de Signed-off-by: Marc Kleine-Budde