pm24.git/drivers/net/can/flexcan, branch master

can: Switch back to struct platform_driver::remove()

2024-09-11T07:37:16Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all can drivers to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://patch.msgid.link/20240909072742.381003-2-u.kleine-koenig@baylibre.com Signed-off-by: Marc Kleine-Budde

can: flexcan: add wakeup support for imx95

2024-08-05T14:45:45Z

iMX95 defines a bit in GPR that sets/unsets the IPG_STOP signal to the FlexCAN module, controlling its entry into STOP mode. Wakeup should work even if FlexCAN is in STOP mode. Due to iMX95 architecture design, the A-Core cannot access GPR; only the system manager (SM) can configure GPR. To support the wakeup feature, follow these steps: - For suspend: 1) During Linux suspend, when CAN suspends, do nothing for GPR and keep CAN-related clocks on. 2) In ATF, check whether CAN needs to support wakeup; if yes, send a request to SM through the SCMI protocol. 3) In SM, configure the GPR and unset IPG_STOP. 4) A-Core suspends. - For wakeup and resume: 1) A-Core wakeup event arrives. 2) In SM, deassert IPG_STOP. 3) Linux resumes. Add a new fsl_imx95_devtype_data and FLEXCAN_QUIRK_SETUP_STOP_MODE_SCMI to reflect this. Reviewed-by: Han Xu Signed-off-by: Haibo Chen Reviewed-by: Vincent Mailhol Signed-off-by: Frank Li Link: https://lore.kernel.org/all/20240731-flexcan-v4-2-82ece66e5a76@nxp.com Signed-off-by: Marc Kleine-Budde

net: can: Use device_get_match_data()

2024-01-19T14:08:53Z

Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Error checking for matching and match data was not necessary as matching is always successful if we're already in probe and the match tables always have data pointers. Signed-off-by: Rob Herring

can: flexcan: remove the auto stop mode for IMX93

2023-10-06T10:54:33Z

IMX93 A0 chip involve the internal q-channel handshake in LPCG and CCM to automatically handle the Flex-CAN IPG STOP signal. Only after FLEX-CAN enter stop mode then can support the self-wakeup feature. But meet issue when do the continue system PM stress test. When config the CAN as wakeup source, the first time after system suspend, any data on CAN bus can wakeup the system, this is as expect. But the second time when system suspend, data on CAN bus can't wakeup the system. If continue this test, we find in odd time system enter suspend, CAN can wakeup the system, but in even number system enter suspend, CAN can't wakeup the system. IC find a bug in the auto stop mode logic, and can't fix it easily. So for the new imx93 A1, IC drop the auto stop mode and involve the GPR to support stop mode (used before). IC define a bit in GPR which can trigger the IPG STOP signal to Flex-CAN, let it go into stop mode. And NXP claim to drop IMX93 A0, and only support IMX93 A1. So this patch remove the auto stop mode, and add flag FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR to imx93. Signed-off-by: Haibo Chen Link: https://lore.kernel.org/all/20230726112458.3524165-2-haibo.chen@nxp.com Signed-off-by: Marc Kleine-Budde

can: flexcan: fix the return value handle for platform_get_irq()

2023-07-31T08:12:56Z

There is no possible for platform_get_irq() to return 0 and the return value of platform_get_irq() is more sensible to show the error reason. Signed-off-by: Ruan Jinjie Link: https://lore.kernel.org/all/20230731075252.359965-1-ruanjinjie@huawei.com Signed-off-by: Marc Kleine-Budde

can: rx-offload: rename rx_offload_get_echo_skb() -> can_rx_offload_get_echo_skb_queue_timestamp()

2023-07-28T07:45:24Z

Rename the rx_offload_get_echo_skb() function to can_rx_offload_get_echo_skb_queue_timestamp(), since it inserts the echo skb into the rx-offload queue sorted by timestamp. This is a preparation for adding can_rx_offload_get_echo_skb_queue_tail(), which adds the echo skb to the end of the queue. This is intended for devices that do not support timestamps. Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-1-716e542d14d5@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: flexcan: Convert to platform remove callback returning void

2023-05-15T20:53:50Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230512212725.143824-8-u.kleine-koenig@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: flexcan: avoid unbalanced pm_runtime_enable warning

2022-12-19T15:08:27Z

When do suspend/resume, meet the following warning message: [ 30.028336] flexcan 425b0000.can: Unbalanced pm_runtime_enable! Balance the pm_runtime_force_suspend() and pm_runtime_force_resume(). Fixes: 8cb53b485f18 ("can: flexcan: add auto stop mode for IMX93 to support wakeup") Signed-off-by: Haibo Chen Link: https://lore.kernel.org/all/20221213094351.3023858-1-haibo.chen@nxp.com Signed-off-by: Marc Kleine-Budde

can: flexcan: add auto stop mode for IMX93 to support wakeup

2022-12-12T10:39:12Z

IMX93 do not contain a GPR to config the stop mode, it will set the flexcan into stop mode automatically once the ARM core go into low power mode (WFI instruct) and gate off the flexcan related clock automatically. But to let these logic work as expect, before ARM core go into low power mode, need to make sure the flexcan related clock keep on. To support stop mode and wakeup feature on imx93, this patch add a new fsl_imx93_devtype_data to separate from imx8mp. Signed-off-by: Haibo Chen Link: https://lore.kernel.org/all/1669116752-4260-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Marc Kleine-Budde

can: dev: fix skb drop check

2022-11-07T13:00:27Z

In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. Fixes: a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") Reported-by: Dariusz Stojaczyk Cc: Vincent Mailhol Cc: Max Staudt Signed-off-by: Oliver Hartkopp Acked-by: Vincent Mailhol Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org # 6.0.x [mkl: patch pch_can, too] Signed-off-by: Marc Kleine-Budde