pm24.git/drivers/net/mctp, branch master

net: mctp: Expose transport binding identifier via IFLA attribute

2024-11-09T17:04:54Z

MCTP control protocol implementations are transport binding dependent. Endpoint discovery is mandatory based on transport binding. Message timing requirements are specified in each respective transport binding specification. However, we currently have no means to get this information from MCTP links. Add a IFLA_MCTP_PHYS_BINDING netlink link attribute, which represents the transport type using the DMTF DSP0239-defined type numbers, returned as part of RTM_GETLINK data. We get an IFLA_MCTP_PHYS_BINDING attribute for each MCTP link, for example: - 0x00 (unspec) for loopback interface; - 0x01 (SMBus/I2C) for mctpi2c%d interfaces; and - 0x05 (serial) for mctpserial%d interfaces. Signed-off-by: Khang Nguyen Reviewed-by: Matt Johnston Link: https://patch.msgid.link/20241105071915.821871-1-khangng@os.amperecomputing.com Signed-off-by: Jakub Kicinski

mctp i2c: handle NULL header address

2024-10-29T18:22:38Z

daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol. Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver") Cc: stable@vger.kernel.org Reported-by: Dung Cao Signed-off-by: Matt Johnston Reviewed-by: Simon Horman Link: https://patch.msgid.link/20241022-mctp-i2c-null-dest-v3-1-e929709956c5@codeconstruct.com.au Signed-off-by: Jakub Kicinski

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23Z

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Merge tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-09-26T16:59:50Z

Pull tty / serial driver updates from Greg KH: "Here is the "big" set of tty/serial driver updates for 6.12-rc1. Nothing major in here, just nice forward progress in the slow cleanup of the serial apis, and lots of other driver updates and fixes. Included in here are: - serial api updates from Jiri to make things more uniform and sane - 8250_platform driver cleanups - samsung serial driver fixes and updates - qcom-geni serial driver fixes from Johan for the bizarre UART engine that that chip seems to have. Hopefully it's in a better state now, but hardware designers still seem to come up with more ways to make broken UARTS 40+ years after this all should have finished. - sc16is7xx driver updates - omap 8250 driver updates - 8250_bcm2835aux driver updates - a few new serial driver bindings added - other serial minor driver updates All of these have been in linux-next for a long time with no reported problems" * tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits) tty: serial: samsung: Fix serial rx on Apple A7-A9 tty: serial: samsung: Fix A7-A11 serial earlycon SError tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_* tty: rp2: Fix reset with non forgiving PCIe host bridges serial: 8250_aspeed_vuart: Enable module autoloading serial: qcom-geni: fix polled console corruption serial: qcom-geni: disable interrupts during console writes serial: qcom-geni: fix console corruption serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield() serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit() soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers serial: qcom-geni: fix false console tx restart serial: qcom-geni: fix fifo polling timeout tty: hvc: convert comma to semicolon mxser: convert comma to semicolon serial: 8250_bcm2835aux: Fix clock imbalance in PM resume serial: sc16is7xx: convert bitmask definitions to use BIT() macro serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK serial: xilinx_uartps: Make cdns_rs485_supported static ...

net: mctp-serial: Fix missing escapes on transmit

2024-09-01T17:14:01Z

0x7d and 0x7e bytes are meant to be escaped in the data portion of frames, but this didn't occur since next_chunk_len() had an off-by-one error. That also resulted in the final byte of a payload being written as a separate tty write op. The chunk prior to an escaped byte would be one byte short, and the next call would never test the txpos+1 case, which is where the escaped byte was located. That meant it never hit the escaping case in mctp_serial_tx_work(). Example Input: 01 00 08 c8 7e 80 02 Previous incorrect chunks from next_chunk_len(): 01 00 08 c8 7e 80 02 With this fix: 01 00 08 c8 7e 80 02 Cc: stable@vger.kernel.org Fixes: a0c2ccd9b5ad ("mctp: Add MCTP-over-serial transport binding") Signed-off-by: Matt Johnston Signed-off-by: David S. Miller

net: mctp-serial: Add kunit test for next_chunk_len()

2024-09-01T17:14:01Z

Test various edge cases of inputs that contain characters that need escaping. This adds a new kunit suite for mctp-serial. Signed-off-by: Matt Johnston Signed-off-by: David S. Miller

mctp: serial: propagage new tty types

2024-08-14T06:25:21Z

In tty, u8 is now used for data, ssize_t for sizes (with possible negative error codes). Propagate these types (and use unsigned in next_chunk_len()) to mctp. Signed-off-by: Jiri Slaby (SUSE) Reviewed-by: Jeremy Kerr Cc: Greg Kroah-Hartman Cc: Jeremy Kerr Cc: Matt Johnston Cc: David S. Miller Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20240808103549.429349-7-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

net: mctp-i2c: invalidate flows immediately on TX errors

2024-07-12T12:37:31Z

If we encounter an error on i2c packet transmit, we won't have a valid flow anymore; since we didn't transmit a valid packet sequence, we'll have to wait for the key to timeout instead of dropping it on the reply. This causes the i2c lock to be held for longer than necessary. Instead, invalidate the flow on TX error, and release the i2c lock immediately. Cc: Bonnie Lo Tested-by: Jerry C Chen Signed-off-by: Jeremy Kerr Signed-off-by: David S. Miller

net: Drop explicit initialization of struct i2c_device_id::driver_data to 0

2024-06-26T14:28:08Z

These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König Reviewed-by: Petr Machata # For mlxsw Reviewed-by: Kory Maincent Reviewed-by: Jeremy Kerr # for mctp-i2c Reviewed-by: Oleksij Rempel Acked-by: Oleksij Rempel Link: https://patch.msgid.link/20240625083853.2205977-2-u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski

mctp i3c: MCTP I3C driver

2023-10-17T10:45:03Z

Provides MCTP network transport over an I3C bus, as specified in DMTF DSP0233. Each I3C bus (with "mctp-controller" devicetree property) gets an "mctpi3cX" net device created. I3C devices are reachable as remote endpoints through that net device. Link layer addressing uses the I3C PID as a fixed hardware address for neighbour table entries. The driver matches I3C devices that have the MIPI assigned DCR 0xCC for MCTP. Signed-off-by: Matt Johnston Reviewed-by: Simon Horman Signed-off-by: Paolo Abeni