pm24.git/drivers/net/phy, branch rust-fixes-6.10

net: phy: Micrel KSZ8061: fix errata solution not taking effect problem

2024-06-05T09:03:15Z

KSZ8061 needs to write to a MMD register at driver initialization to fix an errata. This worked in 5.0 kernel but not in newer kernels. The issue is the main phylib code no longer resets PHY at the very beginning. Calling phy resuming code later will reset the chip if it is already powered down at the beginning. This wipes out the MMD register write. Solution is to implement a phy resume function for KSZ8061 to take care of this problem. Fixes: 232ba3a51cc2 ("net: phy: Micrel KSZ8061: link failure after cable connect") Signed-off-by: Tristram Ha Signed-off-by: David S. Miller

net: phy: micrel: fix KSZ9477 PHY issues after suspend/resume

2024-06-03T11:06:29Z

When the PHY is powered up after powered down most of the registers are reset, so the PHY setup code needs to be done again. In addition the interrupt register will need to be setup again so that link status indication works again. Fixes: 26dd2974c5b5 ("net: phy: micrel: Move KSZ9477 errata fixes to PHY driver") Signed-off-by: Tristram Ha Signed-off-by: David S. Miller

net: micrel: Fix lan8841_config_intr after getting out of sleep mode

2024-05-27T23:58:39Z

When the interrupt is enabled, the function lan8841_config_intr tries to clear any pending interrupts by reading the interrupt status, then checks the return value for errors and then continue to enable the interrupt. It has been seen that once the system gets out of sleep mode, the interrupt status has the value 0x400 meaning that the PHY detected that the link was in low power. That is correct value but the problem is that the check is wrong. We try to check for errors but we return an error also in this case which is not an error. Therefore fix this by returning only when there is an error. Fixes: a8f1a19d27ef ("net: micrel: Add support for lan8841 PHY") Signed-off-by: Horatiu Vultur Reviewed-by: Suman Ghosh Reviewed-by: Andrew Lunn Reviewed-by: Russell King (Oracle) Link: https://lore.kernel.org/r/20240524085350.359812-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski

net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8061

2024-05-24T11:30:38Z

Following a similar reinstate for the KSZ8081 and KSZ9031. Older kernels would use the genphy_soft_reset if the PHY did not implement a .soft_reset. The KSZ8061 errata described here: https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8061-Errata-DS80000688B.pdf and worked around with 232ba3a51c ("net: phy: Micrel KSZ8061: link failure after cable connect") is back again without this soft reset. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Tested-by: Karim Ben Houcine Signed-off-by: Mathieu Othacehe Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-05-14T17:53:19Z

Merge in late fixes to prepare for the 6.10 net-next PR. Signed-off-by: Jakub Kicinski

net: micrel: Fix receiving the timestamp in the frame for lan8841

2024-05-14T12:38:31Z

The blamed commit started to use the ptp workqueue to get the second part of the timestamp. And when the port was set down, then this workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING is not enabled, then the ptp_clock is not initialized so then it would crash when it would try to access the delayed work. So then basically by setting up and then down the port, it would crash. The fix consists in checking if the ptp_clock is initialized and only then cancel the delayed work. Fixes: cc7554954848 ("net: micrel: Change to receive timestamp in the frame for lan8841") Signed-off-by: Horatiu Vultur Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net: revert partially applied PHY topology series

2024-05-14T01:35:02Z

The series is causing issues with PHY drivers built as modules. Since it was only partially applied and the merge window has opened let's revert and try again for v6.11. Revert 6916e461e793 ("net: phy: Introduce ethernet link topology representation") Revert 0ec5ed6c130e ("net: sfp: pass the phy_device when disconnecting an sfp module's PHY") Revert e75e4e074c44 ("net: phy: add helpers to handle sfp phy connect/disconnect") Revert fdd353965b52 ("net: sfp: Add helper to return the SFP bus name") Revert 841942bc6212 ("net: ethtool: Allow passing a phy index for some commands") Link: https://lore.kernel.org/all/171242462917.4000.9759453824684907063.git-patchwork-notify@kernel.org/ Link: https://lore.kernel.org/all/20240507102822.2023826-1-maxime.chevallier@bootlin.com/ Link: https://lore.kernel.org/r/20240513154156.104281-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: phy: air_en8811h: reset netdev rules when LED is set manually

2024-05-13T20:51:17Z

Setting LED_OFF via brightness_set should deactivate hw control, so make sure netdev trigger rules also get cleared in that case. This fixes unwanted restoration of the default netdev trigger rules and matches the behaviour when using the 'netdev' trigger without any hardware offloading. Fixes: 71e79430117d ("net: phy: air_en8811h: Add the Airoha EN8811H PHY driver") Signed-off-by: Daniel Golle Link: https://lore.kernel.org/r/5ed8ea615890a91fa4df59a7ae8311bbdf63cdcf.1715248281.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-05-09T17:01:01Z

Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c 35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization") 2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3") Signed-off-by: Jakub Kicinski

net: phy: marvell-88q2xxx: add support for Rev B1 and B2

2024-05-08T11:18:25Z

Different revisions of the Marvell 88q2xxx phy needs different init sequences. Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one register write. Tested-by: Dimitri Fedrau Signed-off-by: Gregor Herburger Signed-off-by: David S. Miller