pm24.git/drivers/net/wireguard, branch v5.8

wireguard: queueing: make use of ip_tunnel_parse_protocol

2020-06-30T19:29:39Z

Now that wg_examine_packet_protocol has been added for general consumption as ip_tunnel_parse_protocol, it's possible to remove wg_examine_packet_protocol and simply use the new ip_tunnel_parse_protocol function directly. Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller

wireguard: implement header_ops->parse_protocol for AF_PACKET

2020-06-30T19:29:39Z

WireGuard uses skb->protocol to determine packet type, and bails out if it's not set or set to something it's not expecting. For AF_PACKET injection, we need to support its call chain of: packet_sendmsg -> packet_snd -> packet_parse_headers -> dev_parse_header_protocol -> parse_protocol Without a valid parse_protocol, this returns zero, and wireguard then rejects the skb. So, this wires up the ip_tunnel handler for layer 3 packets for that case. Reported-by: Hans Wippel Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller

wireguard: receive: account for napi_gro_receive never returning GRO_DROP

2020-06-25T23:16:21Z

The napi_gro_receive function no longer returns GRO_DROP ever, making handling GRO_DROP dead code. This commit removes that dead code. Further, it's not even clear that device drivers have any business in taking action after passing off received packets; that's arguably out of their hands. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller

wireguard: device: avoid circular netns references

2020-06-23T21:50:34Z

Before, we took a reference to the creating netns if the new netns was different. This caused issues with circular references, with two wireguard interfaces swapping namespaces. The solution is to rather not take any extra references at all, but instead simply invalidate the creating netns pointer when that netns is deleted. In order to prevent this from happening again, this commit improves the rough object leak tracking by allowing it to account for created and destroyed interfaces, aside from just peers and keys. That then makes it possible to check for the object leak when having two interfaces take a reference to each others' namespaces. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller

wireguard: noise: do not assign initiation time in if condition

2020-06-23T21:50:34Z

Fixes an error condition reported by checkpatch.pl which caused by assigning a variable in an if condition in wg_noise_handshake_consume_ initiation(). Signed-off-by: Frank Werner-Krippendorf Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller

wireguard: noise: separate receive counter from send counter

2020-05-21T03:55:09Z

In "wireguard: queueing: preserve flow hash across packet scrubbing", we were required to slightly increase the size of the receive replay counter to something still fairly small, but an increase nonetheless. It turns out that we can recoup some of the additional memory overhead by splitting up the prior union type into two distinct types. Before, we used the same "noise_counter" union for both sending and receiving, with sending just using a simple atomic64_t, while receiving used the full replay counter checker. This meant that most of the memory being allocated for the sending counter was being wasted. Since the old "noise_counter" type increased in size in the prior commit, now is a good time to split up that union type into a distinct "noise_replay_ counter" for receiving and a boring atomic64_t for sending, each using neither more nor less memory than required. Also, since sometimes the replay counter is accessed without necessitating additional accesses to the bitmap, we can reduce cache misses by hoisting the always-necessary lock above the bitmap in the struct layout. We also change a "noise_replay_counter" stack allocation to kmalloc in a -DDEBUG selftest so that KASAN doesn't trigger a stack frame warning. All and all, removing a bit of abstraction in this commit makes the code simpler and smaller, in addition to the motivating memory usage recuperation. For example, passing around raw "noise_symmetric_key" structs is something that really only makes sense within noise.c, in the one place where the sending and receiving keys can safely be thought of as the same type of object; subsequent to that, it's important that we uniformly access these through keypair->{sending,receiving}, where their distinct roles are always made explicit. So this patch allows us to draw that distinction clearly as well. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller

wireguard: queueing: preserve flow hash across packet scrubbing

2020-05-21T03:55:09Z

It's important that we clear most header fields during encapsulation and decapsulation, because the packet is substantially changed, and we don't want any info leak or logic bug due to an accidental correlation. But, for encapsulation, it's wrong to clear skb->hash, since it's used by fq_codel and flow dissection in general. Without it, classification does not proceed as usual. This change might make it easier to estimate the number of innerflows by examining clustering of out of order packets, but this shouldn't open up anything that can't already be inferred otherwise (e.g. syn packet size inference), and fq_codel can be disabled anyway. Furthermore, it might be the case that the hash isn't used or queried at all until after wireguard transmits the encrypted UDP packet, which means skb->hash might still be zero at this point, and thus no hash taken over the inner packet data. In order to address this situation, we force a calculation of skb->hash before encrypting packet data. Of course this means that fq_codel might transmit packets slightly more out of order than usual. Toke did some testing on beefy machines with high quantities of parallel flows and found that increasing the reply-attack counter to 8192 takes care of the most pathological cases pretty well. Reported-by: Dave Taht Reviewed-and-tested-by: Toke Høiland-Jørgensen Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller

wireguard: noise: read preshared key while taking lock

2020-05-21T03:55:09Z

Prior we read the preshared key after dropping the handshake lock, which isn't an actual crypto issue if it races, but it's still not quite correct. So copy that part of the state into a temporary like we do with the rest of the handshake state variables. Then we can release the lock, operate on the temporary, and zero it out at the end of the function. In performance tests, the impact of this was entirely unnoticable, probably because those bytes are coming from the same cacheline as other things that are being copied out in the same manner. Reported-by: Matt Dunwoodie Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller

wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing

2020-05-07T03:03:47Z

It's very unlikely that send will become true. It's nearly always false between 0 and 120 seconds of a session, and in most cases becomes true only between 120 and 121 seconds before becoming false again. So, unlikely(send) is clearly the right option here. What happened before was that we had this complex boolean expression with multiple likely and unlikely clauses nested. Since this is evaluated left-to-right anyway, the whole thing got converted to unlikely. So, we can clean this up to better represent what's going on. The generated code is the same. Suggested-by: Sultan Alsawaf Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller

wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning

2020-05-07T03:03:47Z

Without setting these to NULL, clang complains in certain configurations that have CONFIG_IPV6=n: In file included from drivers/net/wireguard/ratelimiter.c:223: drivers/net/wireguard/selftest/ratelimiter.c:173:34: error: variable 'skb6' is uninitialized when used here [-Werror,-Wuninitialized] ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count); ^~~~ drivers/net/wireguard/selftest/ratelimiter.c:123:29: note: initialize the variable 'skb6' to silence this warning struct sk_buff *skb4, *skb6; ^ = NULL drivers/net/wireguard/selftest/ratelimiter.c:173:40: error: variable 'hdr6' is uninitialized when used here [-Werror,-Wuninitialized] ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count); ^~~~ drivers/net/wireguard/selftest/ratelimiter.c:125:22: note: initialize the variable 'hdr6' to silence this warning struct ipv6hdr *hdr6; ^ We silence this warning by setting the variables to NULL as the warning suggests. Reported-by: Arnd Bergmann Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller