pm24.git/drivers/pinctrl, branch v5.10

pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request

2020-12-09T08:08:18Z

Mistakenly the buffers (input and output) become enabled together for a short period of time during GPIO request. This is problematic, because instead of initial motive to disable them in the commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO"), the driven value on the pin, which might be used as an IRQ line, brings firmwares of some touch pads to an awkward state that needs a full power off to recover. Fix this, as stated in the culprit commit, by disabling the buffers. Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210497 Reported-by: Pierre-Louis Bossart Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Tested-by: Pierre-Louis Bossart Tested-by: Kai-Heng Feng Link: https://lore.kernel.org/r/20201208182403.40435-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij

pinctrl: aspeed: Fix GPIO requests on pass-through banks

2020-12-08T08:23:51Z

Commit 6726fbff19bf ("pinctrl: aspeed: Fix GPI only function problem.") fixes access to GPIO banks T and U on the AST2600. Both banks contain input-only pins and the GPIO pin function is named GPITx and GPIUx respectively. Unfortunately the fix had a negative impact on GPIO banks D and E for the AST2400 and AST2500 where the GPIO pass-through functions take similar "GPI"-style names. The net effect on the older SoCs was that when the GPIO subsystem requested a pin in banks D or E be muxed for GPIO, they were instead muxed for pass-through mode. Mistakenly muxing pass-through mode e.g. breaks booting the host on IBM's Witherspoon (AC922) platform where GPIOE0 is used for FSI. Further exploit the names in the provided expression structure to differentiate pass-through from pin-specific GPIO modes. This follow-up fix gives the expected behaviour for the following tests: Witherspoon BMC (AST2500): 1. Power-on the Witherspoon host 2. Request GPIOD1 be muxed via /sys/class/gpio/export 3. Request GPIOE1 be muxed via /sys/class/gpio/export 4. Request the balls for GPIOs E2 and E3 be muxed as GPIO pass-through ("GPIE2" mode) via a pinctrl hog in the devicetree Rainier BMC (AST2600): 5. Request GPIT0 be muxed via /sys/class/gpio/export 6. Request GPIU0 be muxed via /sys/class/gpio/export Together the tests demonstrate that all three pieces of functionality (general GPIOs via 1, 2 and 3, input-only GPIOs via 5 and 6, pass-through mode via 4) operate as desired across old and new SoCs. Fixes: 9b92f5c51e9a ("pinctrl: aspeed: Fix GPI only function problem.") Signed-off-by: Andrew Jeffery Tested-by: Joel Stanley Reviewed-by: Joel Stanley Cc: Billy Tsai Cc: Joel Stanley Link: https://lore.kernel.org/r/20201126063337.489927-1-andrew@aj.id.au Signed-off-by: Linus Walleij

pinctrl: amd: remove debounce filter setting in IRQ type setting

2020-12-04T09:02:18Z

Debounce filter setting should be independent from IRQ type setting because according to the ACPI specs, there are separate arguments for specifying debounce timeout and IRQ type in GpioIo() and GpioInt(). Together with commit 06abe8291bc31839950f7d0362d9979edc88a666 ("pinctrl: amd: fix incorrect way to disable debounce filter") and Andy's patch "gpiolib: acpi: Take into account debounce settings" [1], this will fix broken touchpads for laptops whose BIOS set the debounce timeout to a relatively large value. For example, the BIOS of Lenovo AMD gaming laptops including Legion-5 15ARH05 (R7000), Legion-5P (R7000P) and IdeaPad Gaming 3 15ARH05, set the debounce timeout to 124.8ms. This led to the kernel receiving only ~7 HID reports per second from the Synaptics touchpad (MSFT0001:00 06CB:7F28). Existing touchpads like [2][3] are not troubled by this bug because the debounce timeout has been set to 0 by the BIOS before enabling the debounce filter in setting IRQ type. [1] https://lore.kernel.org/linux-gpio/20201111222008.39993-11-andriy.shevchenko@linux.intel.com/ 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings") [2] https://github.com/Syniurge/i2c-amd-mp2/issues/11#issuecomment-721331582 [3] https://forum.manjaro.org/t/random-short-touchpad-freezes/30832/28 Signed-off-by: Coiby Xu Reviewed-by: Andy Shevchenko Cc: Hans de Goede Cc: Andy Shevchenko Cc: Benjamin Tissoires Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-gpio/CAHp75VcwiGREBUJ0A06EEw-SyabqYsp%2Bdqs2DpSrhaY-2GVdAA%40mail.gmail.com/ BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887190 Link: https://lore.kernel.org/r/20201125130320.311059-1-coiby.xu@gmail.com Signed-off-by: Linus Walleij

Merge tag 'intel-pinctrl-v5.10-3' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes

2020-11-17T21:20:17Z

intel-pinctrl for v5.10-3 * Fix HOSTSW_OWN offset and unhide SPI group of pins on Jasper Lake * Fix debounce configuration on Baytrail when it's turned off * Fix default bias setting on Merrifield The following is an automated git shortlog grouped by driver: baytrail: - Avoid clearing debounce value when turning it off jasperlake: - Fix HOSTSW_OWN offset - Unhide SPI group of pins merrifield: - Set default bias in case no particular value given

pinctrl: baytrail: Avoid clearing debounce value when turning it off

2020-11-16T10:07:57Z

Baytrail pin control has a common register to set up debounce timeout. When a pin configuration requested debounce to be disabled, the rest of the pins may still want to have debounce enabled and thus rely on the common timeout value. Avoid clearing debounce value when turning it off for one pin while others may still use it. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Depends-on: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") Depends-on: 827e1579e1d5 ("pinctrl: baytrail: Rectify debounce support (part 2)") Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg

pinctrl: merrifield: Set default bias in case no particular value given

2020-11-16T10:07:57Z

When GPIO library asks pin control to set the bias, it doesn't pass any value of it and argument is considered boolean (and this is true for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual drivers must behave well, when they got the resistance value of 1 Ohm, i.e. transforming it to sane default. In case of Intel Merrifield pin control hardware the 20 kOhm sounds plausible because it gives a good trade off between weakness and minimization of leakage current (will be only 50 uA with the above choice). Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg

pinctrl: jasperlake: Fix HOSTSW_OWN offset

2020-11-16T10:07:57Z

GPIOs that attempt to use interrupts get thwarted with a message like: "pin 161 cannot be used as IRQ" (for instance with SD_CD). This is because the HOSTSW_OWN offset is incorrect, so every GPIO looks like it's owned by ACPI. Fixes: e278dcb7048b1 ("pinctrl: intel: Add Intel Jasper Lake pin controller support") Cc: stable@vger.kernel.org Signed-off-by: Evan Green Acked-by: Mika Westerberg Signed-off-by: Andy Shevchenko

pinctrl: jasperlake: Unhide SPI group of pins

2020-11-16T10:07:56Z

If the group of pins is hidden in the pin list it affects the register offset calculation despite fixed GPIO base. Hence, the offsets of all pins after the hidden group are broken. Instead we have to unhide the group and use a flag to exclude it from GPIO number space. Fixes: e278dcb7048b ("pinctrl: intel: Add Intel Jasper Lake pin controller support") Reported-by: Divagar Mohandass Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg

Merge tag 'intel-pinctrl-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes

2020-11-10T14:35:41Z

intel-pinctrl for v5.10-2 * Respect bias setting when comes from ACPI The following is an automated git shortlog grouped by driver: intel: - Set default bias in case no particular value given - Fix 2 kOhm bias which is 833 Ohm

pinctrl: qcom: sm8250: Specify PDC map

2020-11-10T13:57:05Z

Specify the PDC mapping for SM8250, so that gpio interrupts are propertly mapped to the wakeup IRQs of the PDC. Fixes: 4e3ec9e407ad ("pinctrl: qcom: Add sm8250 pinctrl driver.") Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20201028043642.1141723-1-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij