pm24.git/drivers/reset, branch v6.12-rc2

reset: eyeq: add platform driver

2024-09-02T10:12:41Z

Add Mobileye EyeQ reset controller driver, for EyeQ5, EyeQ6L and EyeQ6H SoCs. Instances belong to a shared register region called OLB and gets spawned as auxiliary device to the platform driver for clock. There is one OLB instance for EyeQ5 and EyeQ6L. There are seven OLB instances on EyeQ6H; three have a reset controller embedded: - West and east get handled by the same compatible. - Acc (accelerator) is another one. Each instance vary in the number and types of reset domains. Instances with single domain expect a single cell, others two. Signed-off-by: Théo Lebrun Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-2-00b870a6a2ff@bootlin.com Signed-off-by: Philipp Zabel

reset: reset-meson: Add support for Amlogic T7 SoC reset controller

2024-09-02T10:09:17Z

There are 7 sets of Reset Source in Amlogic T7 SoC reset controller, and the offset between base and level registers is 0x40. Add a new compatible string and struct meson_reset_param to support the reset controller on T7 SoC. Signed-off-by: Zelong Dong Signed-off-by: Kelvin Zhang Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240422-t7-reset-v2-2-cb82271d3296@amlogic.com Signed-off-by: Philipp Zabel

reset: core: add get_device()/put_device on rcdev

2024-09-02T10:02:41Z

Since the rcdev structure is allocated by the reset controller drivers themselves, they need to exists as long as there is a consumer. A call to module_get() is already existing but that does not work when using device-tree overlays. In order to guarantee that the underlying reset controller device does not vanish while using it, add a get_device() call when retrieving a reset control from a reset controller device and a put_device() when releasing that control. Signed-off-by: Clément Léger Signed-off-by: Herve Codina Reviewed-by: Philipp Zabel Reviewed-by: Rob Herring (Arm) Reviewed-by: Andrew Lunn Reviewed-by: Steen Hegelund Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240808154658.247873-8-herve.codina@bootlin.com Signed-off-by: Philipp Zabel

reset: lpc18xx: simplify with devm_clk_get_enabled()

2024-09-02T09:56:15Z

Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and make the code simpler. Change to dev_err_probe() in handling reset_controller_register() error to make it even simpler. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Damien Le Moal Acked-by: Vladimir Zapolskiy Reviewed-by: Vladimir Zapolskiy Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-5-03f6d834f8c0@linaro.org Signed-off-by: Philipp Zabel

reset: lpc18xx: simplify with dev_err_probe()

2024-09-02T09:51:54Z

Use dev_err_probe() to avoid dmesg flood on actual defer. This makes the code also simpler. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Damien Le Moal Acked-by: Vladimir Zapolskiy Reviewed-by: Vladimir Zapolskiy Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-4-03f6d834f8c0@linaro.org Signed-off-by: Philipp Zabel

reset: simplify locking with guard()

2024-09-02T09:51:44Z

Simplify error handling (less gotos) over locks with guard(). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Philipp Zabel Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-3-03f6d834f8c0@linaro.org Signed-off-by: Philipp Zabel

reset: k210: fix OF node leak in probe() error path

2024-09-02T09:51:19Z

Driver is leaking OF node reference on memory allocation failure. Acquire the OF node reference after memory allocation to fix this and keep it simple. Fixes: 5a2308da9f60 ("riscv: Add Canaan Kendryte K210 reset controller") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Damien Le Moal Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-2-03f6d834f8c0@linaro.org Signed-off-by: Philipp Zabel

reset: berlin: fix OF node leak in probe() error path

2024-09-02T09:51:19Z

Driver is leaking OF node reference on memory allocation failure. Acquire the OF node reference after memory allocation to fix this and keep it simple. Fixes: aed6f3cadc86 ("reset: berlin: convert to a platform driver") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Damien Le Moal Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-1-03f6d834f8c0@linaro.org Signed-off-by: Philipp Zabel

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2024-07-25T17:42:22Z

Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...

Merge tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2024-07-16T18:35:27Z

Pull SoC driver updates from Arnd Bergmann: "The updates to the mediatek, allwinner, ti, tegra, microchip, stm32, samsung, imx, zynq and amlogic platoforms are fairly small maintenance changes, either addressing minor mistakes or enabling additional hardware. The qualcomm platform changes add a number of features and are larger than the other ones combined, introducing the use of linux/cleanup.h across several drivers, adding support for Snapdragon X1E and other SoCs in platform drivers, a new "protection domain mapper" driver, and a "shared memory bridge" driver. The cznic "turris omnia" router based on Marvell Armada gets a platform driver that talks to the board specific microcontroller. The reset and cache subsystems get a few minor updates to SoC specific drivers, while the ff-a, scmi and optee firmware drivers get some code refactoring and new features" * tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits) firmware: turris-mox-rwtm: Initialize completion before mailbox firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout() firmware: turris-mox-rwtm: Do not complete if there are no waiters MAINTAINERS: drop riscv list from cache controllers platform: cznic: turris-omnia-mcu: fix Kconfig dependencies bus: sunxi-rsb: Constify struct regmap_bus soc: sunxi: sram: Constify struct regmap_config platform: cznic: turris-omnia-mcu: Depend on WATCHDOG platform: cznic: turris-omnia-mcu: Depend on OF soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers arm64: stm32: enable scmi regulator for stm32 firmware: qcom: tzmem: blacklist more platforms for SHM Bridge soc: qcom: wcnss: simplify with cleanup.h soc: qcom: pdr: simplify with cleanup.h soc: qcom: ocmem: simplify with cleanup.h soc: qcom: mdt_loader: simplify with cleanup.h soc: qcom: llcc: simplify with cleanup.h firmware: qcom: tzmem: simplify returning pointer without cleanup soc: qcom: socinfo: Add PM6350 PMIC arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS ...