pm24.git/drivers/scsi/scsi_error.c, branch v4.15

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-11-15T00:23:44Z

Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor updates. There's no major behaviour change or additions to the core in all of this, so the potential for regressions should be small (biggest potential being in the scsi error handler changes)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: lpfc: Fix hard lock up NMI in els timeout handling. scsi: mpt3sas: remove a stray KERN_INFO scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event() scsi: aacraid: use timespec64 instead of timeval scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair() scsi: mpt3sas: fix dma_addr_t casts scsi: be2iscsi: Use kasprintf scsi: storvsc: Avoid excessive host scan on controller change scsi: lpfc: fix kzalloc-simple.cocci warnings scsi: mpt3sas: Update mpt3sas driver version. scsi: mpt3sas: Fix sparse warnings scsi: mpt3sas: Fix nvme drives checking for tlr. scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives. scsi: mpt3sas: scan and add nvme device after controller reset scsi: mpt3sas: Set NVMe device queue depth as 128 scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware. scsi: mpt3sas: API's to remove nvme drive from sml scsi: mpt3sas: API 's to support NVMe drive addition to SML ...

scsi: scsi_error: DID_SOFT_ERROR comment clean up

2017-11-03T15:23:30Z

Updated comment. We are keeping track of maximum number of retries per command via retries/allowed in struct scsi_cmnd. Corrected comment positioning. [mkp: applied by hand] Signed-off-by: Petros Koutoupis Signed-off-by: Martin K. Petersen

scsi: scsi_error: Handle power-on reset unit attention

2017-10-19T00:55:40Z

As per SAM there is a status precedence, with any sense code 29/XX taking second place just after an ACA ACTIVE status. Additionally, each target might prefer to not queue any unit attention conditions, but just report one. Due to the above, this will be that one with the highest precedence. This results in the sense code 29/XX effectively overwriting any other unit attention. Hence we should report the power-on reset to userland so that it can take appropriate action. Signed-off-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

scsi: scsi_error: Do not retry illegal function error

2017-10-19T00:55:39Z

Hitachi USP-V returns 'ILLEGAL FUNCTION' when the internal staging mechanism encountered an error. These errors should not be retried on another path. [mkp: s/invalid/illegal/] Signed-off-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

scsi: ILLEGAL REQUEST + ASC==27 => target failure

2017-09-28T01:55:21Z

ASC 0x27 is "WRITE PROTECTED". This error code is returned e.g. by Fujitsu ETERNUS systems under certain conditions for WRITE SAME 16 commands with UNMAP bit set. It should not be treated as a path error. In general, it makes sense to assume that being write protected is a target rather than a path property. Signed-off-by: Martin Wilck Acked-by: Lee Duncan Signed-off-by: Martin K. Petersen

scsi: Use blk_mq_rq_to_pdu() to convert a request to a SCSI command pointer

2017-08-25T21:08:07Z

Since commit e9c787e65c0c ("scsi: allocate scsi_cmnd structures as part of struct request") struct request and struct scsi_cmnd are adjacent. This means that there is now an alternative to reading req->special to convert a pointer to a prepared request into a SCSI command pointer, namely by using blk_mq_rq_to_pdu(). Make this change where appropriate. Although this patch does not change any functionality, it slightly improves performance and slightly improves readability. Signed-off-by: Bart Van Assche Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: Suppress gcc 7 fall-through warnings reported with W=1

2017-08-25T21:08:07Z

The conclusion of a recent discussion about the new warnings reported by gcc 7 is that the new warnings reported when building with W=1 should be suppressed. However, gcc 7 still warns about fall-through in switch statements when building with W=1. Suppress these warnings by annotating the SCSI core properly. See also Linus Torvalds, Lots of new warnings with gcc-7.1.1, 11 July 2017 (https://www.mail-archive.com/linux-media@vger.kernel.org/msg115428.html). References: commit bd664f6b3e37 ("disable new gcc-7.1.1 warnings for now") Signed-off-by: Bart Van Assche Reviewed-by: Christoph Hellwig Cc: Hannes Reinecke Cc: Johannes Thumshirn Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-07-06T19:10:33Z

Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc, qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with a host of minor and miscellaneous changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (276 commits) qla2xxx: Fix NVMe entry_type for iocb packet on BE system scsi: qla2xxx: avoid unused-function warning scsi: snic: fix a couple of spelling mistakes/typos scsi: qla2xxx: fix a bunch of typos and spelling mistakes scsi: lpfc: don't double count abort errors scsi: lpfc: spin_lock_irq() is not nestable scsi: hisi_sas: optimise DMA slot memory scsi: ibmvfc: constify dev_pm_ops structures. scsi: ibmvscsi: constify dev_pm_ops structures. scsi: cxlflash: Update debug prints in reset handlers scsi: cxlflash: Update send_tmf() parameters scsi: cxlflash: Avoid double free of character device scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails. scsi: ufs: flush eh_work when eh_work scheduled. scsi: qla2xxx: Protect access to qpair members with qpair->qp_lock scsi: sun_esp: fix device reference leaks scsi: fnic: changing queue command to return result DID_IMM_RETRY when rport is init scsi: fnic: correct speed display and add support for 25,40 and 100G scsi: fnic: added timestamp reporting in fnic debug stats ...

block: Make most scsi_req_init() calls implicit

2017-06-21T01:27:14Z

Instead of explicitly calling scsi_req_init() after blk_get_request(), call that function from inside blk_get_request(). Add an .initialize_rq_fn() callback function to the block drivers that need it. Merge the IDE .init_rq_fn() function into .initialize_rq_fn() because it is too small to keep it as a separate function. Keep the scsi_req_init() call in ide_prep_sense() because it follows a blk_rq_init() call. References: commit 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Bart Van Assche Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Omar Sandoval Cc: Nicholas Bellinger Signed-off-by: Jens Axboe

scsi: Protect SCSI device state changes with a mutex

2017-06-13T00:55:59Z

Serializing SCSI device state changes avoids that two state changes can occur concurrently, e.g. the state changes in scsi_target_block() and __scsi_remove_device(). This serialization is essential to make patch "Make __scsi_remove_device go straight from BLOCKED to DEL" work reliably. Enable this mechanism for all scsi_target_*block() callers but not for the scsi_internal_device_unblock() calls from the mpt3sas driver because that driver can call scsi_internal_device_unblock() from atomic context. Signed-off-by: Bart Van Assche Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Johannes Thumshirn Signed-off-by: Martin K. Petersen