pm24.git/drivers/scsi, branch rust-6.5

scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failed

2023-05-17T01:56:35Z

If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target, scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would be requeued. The timeout of this request would not fire, no one would increase iodone_cnt. The above flow would result the iodone_cnt smaller than iorequest_cnt. So decrease the iorequest_cnt if dispatch failed to workaround the issue. Signed-off-by: Wenchao Hao Reported-by: Ming Lei Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com Link: https://lore.kernel.org/r/20230515070156.1790181-3-haowenchao2@huawei.com Reviewed-by: Ming Lei Signed-off-by: Martin K. Petersen

scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed"

2023-05-17T01:56:35Z

The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would cause kernel panic because cmd->device may be freed after returning from scsi_dispatch_cmd(). This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. Signed-off-by: Wenchao Hao Reported-by: Ming Lei Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com Link: https://lore.kernel.org/r/20230515070156.1790181-2-haowenchao2@huawei.com Reviewed-by: Ming Lei Signed-off-by: Martin K. Petersen

scsi: storvsc: Don't pass unused PFNs to Hyper-V host

2023-05-17T01:50:53Z

In a SCSI request, storvsc pre-allocates space for up to MAX_PAGE_BUFFER_COUNT physical frame numbers to be passed to Hyper-V. If the size of the I/O request requires more PFNs, a separate memory area of exactly the correct size is dynamically allocated. But when the pre-allocated area is used, current code always passes MAX_PAGE_BUFFER_COUNT PFNs to Hyper-V, even if fewer are needed. While this doesn't break anything because the additional PFNs are always zero, more bytes than necessary are copied into the VMBus channel ring buffer. This takes CPU cycles and wastes space in the ring buffer. For a typical 4 Kbyte I/O that requires only a single PFN, 248 unnecessary bytes are copied. Fix this by setting the payload_sz based on the actual number of PFNs required, not the size of the pre-allocated space. Reported-by: John Starks Fixes: 8f43710543ef ("scsi: storvsc: Support PAGE_SIZE larger than 4K") Signed-off-by: Michael Kelley Link: https://lore.kernel.org/r/1684171241-16209-1-git-send-email-mikelley@microsoft.com Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-05-06T15:37:28Z

Pull more SCSI updates from James Bottomley: "Six late arriving patches for the merge window. Five are minor assorted fixes and updates. The IPR driver change removes SATA support, which will now allow a major cleanup in the ATA subsystem because it was the only driver still using the old attachment mechanism. The driver is only used on power systems and SATA was used to support a DVD device, which has long been moved to a different hba. IBM chose this route instead of porting ipr to the newer SATA interfaces" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix use after free bug in qedi_remove() scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue scsi: ipr: Remove several unused variables scsi: pm80xx: Log device registration scsi: ipr: Remove SATA support scsi: scsi_debug: Abort commands from scsi_debug_device_reset()

Merge tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

2023-04-27T23:52:33Z

Pull sysctl updates from Luis Chamberlain: "This only does a few sysctl moves from the kernel/sysctl.c file, the rest of the work has been put towards deprecating two API calls which incur recursion and prevent us from simplifying the registration process / saving memory per move. Most of the changes have been soaking on linux-next since v6.3-rc3. I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's feedback that we should see if we could *save* memory with these moves instead of incurring more memory. We currently incur more memory since when we move a syctl from kernel/sysclt.c out to its own file we end up having to add a new empty sysctl used to register it. To achieve saving memory we want to allow syctls to be passed without requiring the end element being empty, and just have our registration process rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls would make the sysctl registration pretty brittle, hard to read and maintain as can be seen from Meng Tang's efforts to do just this [0]. Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations also implies doing the work to deprecate two API calls which use recursion in order to support sysctl declarations with subdirectories. And so during this development cycle quite a bit of effort went into this deprecation effort. I've annotated the following two APIs are deprecated and in few kernel releases we should be good to remove them: - register_sysctl_table() - register_sysctl_paths() During this merge window we should be able to deprecate and unexport register_sysctl_paths(), we can probably do that towards the end of this merge window. Deprecating register_sysctl_table() will take a bit more time but this pull request goes with a few example of how to do this. As it turns out each of the conversions to move away from either of these two API calls *also* saves memory. And so long term, all these changes *will* prove to have saved a bit of memory on boot. The way I see it then is if remove a user of one deprecated call, it gives us enough savings to move one kernel/sysctl.c out from the generic arrays as we end up with about the same amount of bytes. Since deprecating register_sysctl_table() and register_sysctl_paths() does not require maintainer coordination except the final unexport you'll see quite a bit of these changes from other pull requests, I've just kept the stragglers after rc3" Link: https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org [0] * tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (29 commits) fs: fix sysctls.c built mm: compaction: remove incorrect #ifdef checks mm: compaction: move compaction sysctl to its own file mm: memory-failure: Move memory failure sysctls to its own file arm: simplify two-level sysctl registration for ctl_isa_vars ia64: simplify one-level sysctl registration for kdump_ctl_table utsname: simplify one-level sysctl registration for uts_kern_table ntfs: simplfy one-level sysctl registration for ntfs_sysctls coda: simplify one-level sysctl registration for coda_table fs/cachefiles: simplify one-level sysctl registration for cachefiles_sysctls xfs: simplify two-level sysctl registration for xfs_table nfs: simplify two-level sysctl registration for nfs_cb_sysctls nfs: simplify two-level sysctl registration for nfs4_cb_sysctls lockd: simplify two-level sysctl registration for nlm_sysctls proc_sysctl: enhance documentation xen: simplify sysctl registration for balloon md: simplify sysctl registration hv: simplify sysctl registration scsi: simplify sysctl registration with register_sysctl() csky: simplify alignment sysctl registration ...

Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

2023-04-27T23:36:55Z

Pull module updates from Luis Chamberlain: "The summary of the changes for this pull requests is: - Song Liu's new struct module_memory replacement - Nick Alcock's MODULE_LICENSE() removal for non-modules - My cleanups and enhancements to reduce the areas where we vmalloc module memory for duplicates, and the respective debug code which proves the remaining vmalloc pressure comes from userspace. Most of the changes have been in linux-next for quite some time except the minor fixes I made to check if a module was already loaded prior to allocating the final module memory with vmalloc and the respective debug code it introduces to help clarify the issue. Although the functional change is small it is rather safe as it can only *help* reduce vmalloc space for duplicates and is confirmed to fix a bootup issue with over 400 CPUs with KASAN enabled. I don't expect stable kernels to pick up that fix as the cleanups would have also had to have been picked up. Folks on larger CPU systems with modules will want to just upgrade if vmalloc space has been an issue on bootup. Given the size of this request, here's some more elaborate details: The functional change change in this pull request is the very first patch from Song Liu which replaces the 'struct module_layout' with a new 'struct module_memory'. The old data structure tried to put together all types of supported module memory types in one data structure, the new one abstracts the differences in memory types in a module to allow each one to provide their own set of details. This paves the way in the future so we can deal with them in a cleaner way. If you look at changes they also provide a nice cleanup of how we handle these different memory areas in a module. This change has been in linux-next since before the merge window opened for v6.3 so to provide more than a full kernel cycle of testing. It's a good thing as quite a bit of fixes have been found for it. Jason Baron then made dynamic debug a first class citizen module user by using module notifier callbacks to allocate / remove module specific dynamic debug information. Nick Alcock has done quite a bit of work cross-tree to remove module license tags from things which cannot possibly be module at my request so to: a) help him with his longer term tooling goals which require a deterministic evaluation if a piece a symbol code could ever be part of a module or not. But quite recently it is has been made clear that tooling is not the only one that would benefit. Disambiguating symbols also helps efforts such as live patching, kprobes and BPF, but for other reasons and R&D on this area is active with no clear solution in sight. b) help us inch closer to the now generally accepted long term goal of automating all the MODULE_LICENSE() tags from SPDX license tags In so far as a) is concerned, although module license tags are a no-op for non-modules, tools which would want create a mapping of possible modules can only rely on the module license tag after the commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"). Nick has been working on this *for years* and AFAICT I was the only one to suggest two alternatives to this approach for tooling. The complexity in one of my suggested approaches lies in that we'd need a possible-obj-m and a could-be-module which would check if the object being built is part of any kconfig build which could ever lead to it being part of a module, and if so define a new define -DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've suggested would be to have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as well but that means getting kconfig symbol names mapping to modules always, and I don't think that's the case today. I am not aware of Nick or anyone exploring either of these options. Quite recently Josh Poimboeuf has pointed out that live patching, kprobes and BPF would benefit from resolving some part of the disambiguation as well but for other reasons. The function granularity KASLR (fgkaslr) patches were mentioned but Joe Lawrence has clarified this effort has been dropped with no clear solution in sight [1]. In the meantime removing module license tags from code which could never be modules is welcomed for both objectives mentioned above. Some developers have also welcomed these changes as it has helped clarify when a module was never possible and they forgot to clean this up, and so you'll see quite a bit of Nick's patches in other pull requests for this merge window. I just picked up the stragglers after rc3. LWN has good coverage on the motivation behind this work [2] and the typical cross-tree issues he ran into along the way. The only concrete blocker issue he ran into was that we should not remove the MODULE_LICENSE() tags from files which have no SPDX tags yet, even if they can never be modules. Nick ended up giving up on his efforts due to having to do this vetting and backlash he ran into from folks who really did *not understand* the core of the issue nor were providing any alternative / guidance. I've gone through his changes and dropped the patches which dropped the module license tags where an SPDX license tag was missing, it only consisted of 11 drivers. To see if a pull request deals with a file which lacks SPDX tags you can just use: ./scripts/spdxcheck.py -f \ $(git diff --name-only commid-id | xargs echo) You'll see a core module file in this pull request for the above, but that's not related to his changes. WE just need to add the SPDX license tag for the kernel/module/kmod.c file in the future but it demonstrates the effectiveness of the script. Most of Nick's changes were spread out through different trees, and I just picked up the slack after rc3 for the last kernel was out. Those changes have been in linux-next for over two weeks. The cleanups, debug code I added and final fix I added for modules were motivated by David Hildenbrand's report of boot failing on a systems with over 400 CPUs when KASAN was enabled due to running out of virtual memory space. Although the functional change only consists of 3 lines in the patch "module: avoid allocation if module is already present and ready", proving that this was the best we can do on the modules side took quite a bit of effort and new debug code. The initial cleanups I did on the modules side of things has been in linux-next since around rc3 of the last kernel, the actual final fix for and debug code however have only been in linux-next for about a week or so but I think it is worth getting that code in for this merge window as it does help fix / prove / evaluate the issues reported with larger number of CPUs. Userspace is not yet fixed as it is taking a bit of time for folks to understand the crux of the issue and find a proper resolution. Worst come to worst, I have a kludge-of-concept [3] of how to make kernel_read*() calls for modules unique / converge them, but I'm currently inclined to just see if userspace can fix this instead" Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0] Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1] Link: https://lwn.net/Articles/927569/ [2] Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3] * tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits) module: add debugging auto-load duplicate module support module: stats: fix invalid_mod_bytes typo module: remove use of uninitialized variable len module: fix building stats for 32-bit targets module: stats: include uapi/linux/module.h module: avoid allocation if module is already present and ready module: add debug stats to help identify memory pressure module: extract patient module check into helper modules/kmod: replace implementation with a semaphore Change DEFINE_SEMAPHORE() to take a number argument module: fix kmemleak annotations for non init ELF sections module: Ignore L0 and rename is_arm_mapping_symbol() module: Move is_arm_mapping_symbol() to module_symbol.h module: Sync code of is_arm_mapping_symbol() scripts/gdb: use mem instead of core_layout to get the module address interconnect: remove module-related code interconnect: remove MODULE_LICENSE in non-modules zswap: remove MODULE_LICENSE in non-modules zpool: remove MODULE_LICENSE in non-modules x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules ...

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-04-27T18:53:57Z

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2023-04-26T23:07:23Z

Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-04-26T22:39:25Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target, mpi3mr, hisi_sas, arcmsr). The major core change is the constification of the host templates (which touches everything) along with other minor fixups and clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command() scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately scsi: cxlflash: s/semahpore/semaphore/ scsi: lpfc: Silence an incorrect device output scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation scsi: scsi_debug: Fix missing error code in scsi_debug_init() scsi: hisi_sas: Work around build failure in suspend function scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup() scsi: mpt3sas: Fix an issue when driver is being removed scsi: mpt3sas: Remove HBA BIOS version in the kernel log scsi: target: core: Fix invalid memory access scsi: scsi_debug: Drop sdebug_queue scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll() scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd scsi: scsi_debug: Use scsi_block_requests() to block queues scsi: scsi_debug: Protect block_unblock_all_queues() with mutex scsi: scsi_debug: Change shost list lock to a mutex ...

scsi: qedi: Fix use after free bug in qedi_remove()

2023-04-25T03:32:13Z

In qedi_probe() we call __qedi_probe() which initializes &qedi->recovery_work with qedi_recovery_handler() and &qedi->board_disable_work with qedi_board_disable_work(). When qedi_schedule_recovery_handler() is called, schedule_delayed_work() will finally start the work. In qedi_remove(), which is called to remove the driver, the following sequence may be observed: Fix this by finishing the work before cleanup in qedi_remove(). CPU0 CPU1 |qedi_recovery_handler qedi_remove | __qedi_remove | iscsi_host_free | scsi_host_put | //free shost | |iscsi_host_for_each_session |//use qedi->shost Cancel recovery_work and board_disable_work in __qedi_remove(). Fixes: 4b1068f5d74b ("scsi: qedi: Add MFW error recovery process") Signed-off-by: Zheng Wang Link: https://lore.kernel.org/r/20230413033422.28003-1-zyytlz.wz@163.com Acked-by: Manish Rangankar Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen