pm24.git/drivers/soc, branch v4.4-rc1

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-11-10T23:00:03Z

Pull ARM SoC driver updates from Olof Johansson: "As we've enabled multiplatform kernels on ARM, and greatly done away with the contents under arch/arm/mach-*, there's still need for SoC-related drivers to go somewhere. Many of them go in through other driver trees, but we still have drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code that might be shared between ARM and ARM64 (or just in general makes sense to not have under the architecture directory). This branch contains mostly such code: - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate with power management blocks on these SoCs for use by clock, regulator and bus frequency drivers. - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs. - Drivers for ARM's SCPI (System Control Processor). Not to be confused with PSCI (Power State Coordination Interface). SCPI is used to communicate with the assistant embedded cores doing power management, and we have yet to see how many of them will implement this for their hardware vs abstracting in other ways (or not at all like in the past). - To make confusion between SCPI and PSCI more likely, this release also includes an update of PSCI to interface version 1.0. - Rockchip support for power domains. - A driver to talk to the firmware on Raspberry Pi" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) soc: qcom: smd-rpm: Correct size of outgoing message bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings ARM: bcm2835: add mutual inclusion protection drivers: psci: make PSCI 1.0 functions initialization version dependent dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: qcom/smem: add HWSPINLOCK dependency clk: berlin: add cpuclk ARM: berlin: dts: add CLKID_CPU for BG2Q ARM: bcm2835: Add the Raspberry Pi firmware driver soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs ...

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-11-10T22:56:23Z

Pull ARM SoC platform updates from Olof Johansson: "New and/or improved SoC support for this release: Marvell Berlin: - Enable standard DT-based cpufreq - Add CPU hotplug support Freescale: - Ethernet init for i.MX7D - Suspend/resume support for i.MX6UL Allwinner: - Support for R8 chipset (used on NTC's $9 C.H.I.P board) Mediatek: - SMP support for some platforms Uniphier: - L2 support - Cleaned up SMP support, etc. plus a handful of other patches around above functionality, and a few other smaller changes" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) ARM: uniphier: rework SMP operations to use trampoline code ARM: uniphier: add outer cache support Documentation: EXYNOS: Update bootloader interface on exynos542x ARM: mvebu: add broken-idle option ARM: orion5x: use mac_pton() helper ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned ARM: sunxi: Add R8 support ARM: digicolor: select pinctrl/gpio driver arm: berlin: add CPU hotplug support arm: berlin: use non-self-cleared reset register to reset cpu ARM: mediatek: add smp bringup code ARM: mediatek: enable gpt6 on boot up to make arch timer working soc: mediatek: Fix random hang up issue while kernel init soc: ti: qmss: make acc queue support optional in the driver soc: ti: add firmware file name as part of the driver Documentation: dt: soc: Add description for knav qmss driver ARM: S3C64XX: Use PWM lookup table for mach-smartq ARM: S3C64XX: Use PWM lookup table for mach-hmt ARM: S3C64XX: Use PWM lookup table for mach-crag6410 ARM: S3C64XX: Use PWM lookup table for smdk6410 ...

Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-11-10T22:45:05Z

Pull ARM SoC non-urgent fixes from Olof Johansson: "A handful of fixes that came in and didn't seem warranted to go in through the 4.3-rc cycle. - MAINTAINERS updates for one of the Broadcom platforms and lpc18xx - A couple of non-critical Davinci bugfixes - A fix to reset irq affinity for TI platforms (silences a warning at reboot)" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: update lpc18xx entry with more drivers soc: ti: reset irq affinity before freeing irq ARM: cns3xxx: pci: avoid potential stack overflow ARM: davinci: clock: Correct return values for API functions ARM: davinci: re-use %*ph specifier MAINTAINERS: add entry for the Broadcom Northstar Plus SoCs

soc: qcom: smd-rpm: Correct size of outgoing message

2015-10-31T01:51:20Z

With the removal of VLAIS the size was incorrectly changed to only cover the headers of the packet, resulting in "empty" requests being sent to the RPM. Correct this so the entire message is transfered. Fixes: 50e1b29b4438 ("soc: qcom: smd: Remove use of VLAIS") Signed-off-by: Bjorn Andersson Reviewed-by: Stephen Boyd Signed-off-by: Andy Gross Signed-off-by: Olof Johansson

Merge tag 'v4.3-next-soc' of https://github.com/mbgg/linux-mediatek into next/soc

2015-10-23T17:22:05Z

Do the initial setting of the pmic wrap interrupt before requesting the interrupt. This fixes the corner-case where the pmic is initialized by the bootloader, but not the pmic watchdog. Add support for active wakeup to the scpsys. This allows to keep the power of a scpsys domain during suspend state. With version v4.3 new subsystem clocks are added to the clock dirver. In late init the kernel turns off all unused clocks. This can provoke a hang if the kernel tries to access the venc and venc_lt power domain registers. Add the necessary parent clocks for this power domains to the scpsys so that no random hang happens. The bootloader of mt6589, mt8135 and mt1827 does not turn on the arm-arch-timer. As there is no opensource bootloader in the near future for this architectures we enable the arch timer at kernel boot. We need the arch timer for SMP boot. Add support for SMP on mt6589, mt8127 and mt8135. * tag 'v4.3-next-soc' of https://github.com/mbgg/linux-mediatek: ARM: mediatek: add smp bringup code ARM: mediatek: enable gpt6 on boot up to make arch timer working soc: mediatek: Fix random hang up issue while kernel init soc: mediatek: add scpsys support active_wakeup soc: mediatek: Move the initial setting of pmic wrap interrupt before requesting irq. Signed-off-by: Olof Johansson

Merge tag 'v4.4-rockchip-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers

2015-10-23T17:18:34Z

Some fixes for the new power-domain driver, including restricting Rockchip Kconfig options, fixing a possible null-pointer and a typo in the dt-bindings. * tag 'v4.4-rockchip-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: rockchip: Restrict to ARCH_ROCKCHIP Signed-off-by: Olof Johansson

soc: rockchip: power-domain: don't try to print the clock name in error case

2015-10-16T07:23:59Z

When we never got the the clock-reference, i.e. when IS_ERR(clk) is true, don't try to print the clock name via %pC as this of course produces a null-pointer-dereference in __clk_get_name(). Signed-off-by: Heiko Stuebner Reviewed-by: Caesar Wang

soc: qcom/smem: add HWSPINLOCK dependency

2015-10-15T21:04:11Z

This fixes a build error when smem is enabled without hwspinlock: drivers/built-in.o: In function `qcom_smem_alloc': rockchip-efuse.c:(.text+0x7a3e4): undefined reference to `__hwspin_lock_timeout' rockchip-efuse.c:(.text+0x7a568): undefined reference to `__hwspin_unlock' drivers/built-in.o: In function `qcom_smem_remove': rockchip-efuse.c:(.text+0x7a5cc): undefined reference to `hwspin_lock_free' drivers/built-in.o: In function `qcom_smem_probe': rockchip-efuse.c:(.text+0x7a960): undefined reference to `hwspin_lock_request_specific' rockchip-efuse.c:(.text+0x7a988): undefined reference to `of_hwspin_lock_get_id' drivers/built-in.o: In function `qcom_smem_get': rockchip-efuse.c:(.text+0x7aa24): undefined reference to `__hwspin_lock_timeout' rockchip-efuse.c:(.text+0x7aafc): undefined reference to `__hwspin_unlock' Signed-off-by: Arnd Bergmann

Merge tag 'qcom-soc-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm into next/drivers

2015-10-15T21:03:24Z

Pull "Qualcomm ARM Based SoC Updates for 4.4" from Andy Gross: * Implement id_table driver matching in SMD * Avoid NULL pointer exception on remove of SMEM * Reorder SMEM/SMD configs * Make qcom_smem_get() return a pointer * Handle big endian CPUs correctly in SMEM * Represent SMD channel layout in structures * Use __iowrite32_copy() in SMD * Remove use of VLAIs in SMD * Handle big endian CPUs correctly in SMD/RPM * Handle big endian CPUs corretly in SMD * Reject sending SMD packets that are too large * Fix endianness issue in SCM __qcom_scm_is_call_available * Add missing prototype for qcom_scm_is_available() * Correct SMEM items for upper channels * Use architecture level to build SCM correctly * Delete unneeded of_node_put in SMD * Correct active/slep state flagging in SMD/RPM * Move RPM message ram out of SMEM DT node * tag 'qcom-soc-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm: soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs soc: qcom: smd_rpm: Handle big endian CPUs soc: qcom: smd: Remove use of VLAIS soc: qcom: smd: Use __iowrite32_copy() instead of open-coding it soc: qcom: smd: Represent channel layout in structures soc: qcom: smem: Handle big endian CPUs soc: qcom: Make qcom_smem_get() return a pointer soc: qcom: Reorder SMEM/SMD configs soc: qcom: smem: Avoid NULL pointer exception on remove soc: qcom: smd: Implement id_table driver matching

Merge tag 'keystone-driver-soc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/soc

2015-10-15T20:22:26Z

Merge "ARM Keystone SOC driver updates for 4.4" from Santosh Shilimkar: Documentation and support to be able to load the PDSP firmware necessary for accumulator operation. * tag 'keystone-driver-soc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: ti: qmss: make acc queue support optional in the driver soc: ti: add firmware file name as part of the driver Documentation: dt: soc: Add description for knav qmss driver