pm24.git/drivers/ufs/host, branch master

Merge branch '6.13/scsi-queue' into 6.13/scsi-fixes

2024-12-02T17:36:18Z

Pull in outstanding changes from 6.13/scsi-queue. Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-11-26T02:50:55Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, hisi_sas, st). Amazingly enough, no core changes with the biggest set of driver changes being ufs (which conflicted with it's own fixes a bit, hence the merges) and the rest being minor fixes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits) scsi: st: New session only when Unit Attention for new tape scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset scsi: st: Don't modify unknown block number in MTIOCGET scsi: ufs: core: Restore SM8650 support scsi: sun3: Mark driver struct with __refdata to prevent section mismatch scsi: sg: Enable runtime power management scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb() scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() scsi: fusion: Remove unused variable 'rc' scsi: bfa: Fix use-after-free in bfad_im_module_exit() scsi: esas2r: Remove unused esas2r_build_cli_req() scsi: target: Fix incorrect function name in pscsi_create_type_disk() scsi: ufs: Replace deprecated PCI functions scsi: Switch back to struct platform_driver::remove() scsi: pm8001: Increase request sg length to support 4MiB requests scsi: pm8001: Initialize devices in pm8001_alloc_dev() scsi: pm8001: Use module param to set pcs event log severity scsi: ufs: ufs-mediatek: Configure individual LU queue flags scsi: MAINTAINERS: Update UFS Exynos entry scsi: lpfc: Copyright updates for 14.4.0.6 patches ...

Merge patch series "scsi: ufs: Bug fixes for ufs core and platform drivers"

2024-11-21T03:04:15Z

Manivannan Sadhasivam says: Hi, This series has several bug fixes that I encountered when the ufs-qcom driver was removed and inserted back. But the fixes are applicable to other platform glue drivers as well. This series is tested on Qcom RB5 development board based on SM8250 SoC. Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20241111-ufs_bug_fix-v1-0-45ad8b62f02e@linaro.org Signed-off-by: Martin K. Petersen

scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()

2024-11-21T03:03:06Z

This will ensure that the scsi host is cleaned up properly using scsi_host_dev_release(). Otherwise, it may lead to memory leaks. Cc: stable@vger.kernel.org # 4.4 Fixes: 03b1781aa978 ("[SCSI] ufs: Add Platform glue driver for ufshcd") Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20241111-ufs_bug_fix-v1-5-45ad8b62f02e@linaro.org Reviewed-by: Peter Wang Reviewed-by: Bean Huo Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: ufs: pltfrm: Drop PM runtime reference count after ufshcd_remove()

2024-11-21T03:03:05Z

During the remove stage of glue drivers, some of them are incrementing the reference count using pm_runtime_get_sync(), before removing the ufshcd using ufshcd_remove(). But they are not dropping that reference count after ufshcd_remove() to balance the refcount. So drop the reference count by calling pm_runtime_put_noidle() after ufshcd_remove(). Since the behavior is applicable to all glue drivers, move the PM handling to ufshcd_pltfrm_remove(). Cc: stable@vger.kernel.org # 3.12 Fixes: 62694735ca95 ("[SCSI] ufs: Add runtime PM support for UFS host controller driver") Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20241111-ufs_bug_fix-v1-4-45ad8b62f02e@linaro.org Reviewed-by: Peter Wang Reviewed-by: Bean Huo Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: ufs: pltfrm: Disable runtime PM during removal of glue drivers

2024-11-21T03:03:05Z

When the UFSHCD platform glue drivers are removed, runtime PM should be disabled using pm_runtime_disable() to balance the enablement done in ufshcd_pltfrm_init(). This is also reported by PM core when the glue driver is removed and inserted again: ufshcd-qcom 1d84000.ufshc: Unbalanced pm_runtime_enable! So disable runtime PM using a new helper API ufshcd_pltfrm_remove(), that also takes care of removing ufshcd. This helper should be called during the remove() stage of glue drivers. Cc: stable@vger.kernel.org # 3.12 Fixes: 62694735ca95 ("[SCSI] ufs: Add runtime PM support for UFS host controller driver") Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20241111-ufs_bug_fix-v1-3-45ad8b62f02e@linaro.org Reviewed-by: Peter Wang Reviewed-by: Bean Huo Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: ufs: qcom: Only free platform MSIs when ESI is enabled

2024-11-21T03:03:05Z

Otherwise, it will result in a NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: mutex_lock+0xc/0x54 platform_device_msi_free_irqs_all+0x14/0x20 ufs_qcom_remove+0x34/0x48 [ufs_qcom] platform_remove+0x28/0x44 device_remove+0x4c/0x80 device_release_driver_internal+0xd8/0x178 driver_detach+0x50/0x9c bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 ufs_qcom_pltform_exit+0x18/0xb94 [ufs_qcom] __arm64_sys_delete_module+0x180/0x260 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xdc el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194 Cc: stable@vger.kernel.org # 6.3 Fixes: 519b6274a777 ("scsi: ufs: qcom: Add MCQ ESI config vendor specific ops") Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20241111-ufs_bug_fix-v1-2-45ad8b62f02e@linaro.org Reviewed-by: Bean Huo Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: ufs: Switch back to struct platform_driver::remove()

2024-11-21T02:46:27Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/ufs to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20241119182856.55743-2-u.kleine-koenig@baylibre.com Signed-off-by: Martin K. Petersen

scsi: ufs: core: Restore SM8650 support

2024-11-07T02:12:14Z

Some early UFSHCI 4.0 controllers support the UFSHCI 3.0 register set. The UFSHCD_QUIRK_BROKEN_LSDBS_CAP quirk must be set for these controllers. Commit b92e5937e352 ("scsi: ufs: core: Move code out of an if-statement") changed the behavior for these controllers from working fine into "ufshcd_add_scsi_host: failed to initialize (legacy doorbell mode not supported)". Fix this by setting the "broken LSDBS" quirk for the SM8650 development board. Reported-by: Neil Armstrong Closes: https://lore.kernel.org/linux-scsi/0c0bc528-fdc2-4106-bc99-f23ae377f6f5@linaro.org/ Tested-by: Neil Armstrong # on SM8650-HDK Tested-by: Neil Armstrong # on SM8650-QRD Fixes: b92e5937e352 ("scsi: ufs: core: Move code out of an if-statement") Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20241106181011.4132974-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: ufs: Replace deprecated PCI functions

2024-11-07T01:45:32Z

pcim_iomap_regions() and pcim_iomap_table() have been deprecated in commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()"). Replace these functions with pcim_iomap_region(). Signed-off-by: Philipp Stanner Link: https://lore.kernel.org/r/20241028102428.23118-2-pstanner@redhat.com Reviewed-by: Bean Huo Reviewed-by: Adrian Hunter Signed-off-by: Martin K. Petersen