pm24.git/drivers/usb/host, branch rust-6.13

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23Z

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Merge tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-09-26T16:59:50Z

Pull tty / serial driver updates from Greg KH: "Here is the "big" set of tty/serial driver updates for 6.12-rc1. Nothing major in here, just nice forward progress in the slow cleanup of the serial apis, and lots of other driver updates and fixes. Included in here are: - serial api updates from Jiri to make things more uniform and sane - 8250_platform driver cleanups - samsung serial driver fixes and updates - qcom-geni serial driver fixes from Johan for the bizarre UART engine that that chip seems to have. Hopefully it's in a better state now, but hardware designers still seem to come up with more ways to make broken UARTS 40+ years after this all should have finished. - sc16is7xx driver updates - omap 8250 driver updates - 8250_bcm2835aux driver updates - a few new serial driver bindings added - other serial minor driver updates All of these have been in linux-next for a long time with no reported problems" * tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits) tty: serial: samsung: Fix serial rx on Apple A7-A9 tty: serial: samsung: Fix A7-A11 serial earlycon SError tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_* tty: rp2: Fix reset with non forgiving PCIe host bridges serial: 8250_aspeed_vuart: Enable module autoloading serial: qcom-geni: fix polled console corruption serial: qcom-geni: disable interrupts during console writes serial: qcom-geni: fix console corruption serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield() serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit() soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers serial: qcom-geni: fix false console tx restart serial: qcom-geni: fix fifo polling timeout tty: hvc: convert comma to semicolon mxser: convert comma to semicolon serial: 8250_bcm2835aux: Fix clock imbalance in PM resume serial: sc16is7xx: convert bitmask definitions to use BIT() macro serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK serial: xilinx_uartps: Make cdns_rs485_supported static ...

usb: r8a66597-hcd: make read-only const arrays static

2024-09-13T05:41:27Z

Don't populate the read-only const arrays fifoaddr, fifosel and fifoctr on the stack at run time, instead make them static. Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20240912132345.589397-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: fix loss of data on Cadence xHC

2024-09-11T13:38:25Z

Streams should flush their TRB cache, re-read TRBs, and start executing TRBs from the beginning of the new dequeue pointer after a 'Set TR Dequeue Pointer' command. Cadence controllers may fail to start from the beginning of the dequeue TRB as it doesn't clear the Opaque 'RsvdO' field of the stream context during 'Set TR Dequeue' command. This stream context area is where xHC stores information about the last partially executed TD when a stream is stopped. xHC uses this information to resume the transfer where it left mid TD, when the stream is restarted. Patch fixes this by clearing out all RsvdO fields before initializing new Stream transfer using a 'Set TR Dequeue Pointer' command. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable@vger.kernel.org Signed-off-by: Pawel Laszczak Reviewed-by: Peter Chen Link: https://lore.kernel.org/r/PH7PR07MB95386A40146E3EC64086F409DD9D2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman

usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host

2024-09-11T13:38:13Z

The resume operation of Phytium Px210 xHCI host would failed to restore state. Use the XHCI_RESET_ON_RESUME quirk to skip it and reset the controller after resume. Co-developed-by: Chen Baozi Signed-off-by: Chen Baozi Co-developed-by: Wang Zhimin Signed-off-by: Wang Zhimin Co-developed-by: Chen Zhenhua Signed-off-by: Chen Zhenhua Co-developed-by: Wang Yinfeng Signed-off-by: Wang Yinfeng Co-developed-by: Jiakun Shuai Signed-off-by: Jiakun Shuai Signed-off-by: WangYuli Link: https://lore.kernel.org/r/2C1FDC3BB34715BE+20240905040916.63199-1-wangyuli@uniontech.com Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk

2024-09-11T13:37:52Z

Parse software managed property 'xhci-skip-phy-init-quirk' and 'xhci-skip-phy-init-quirk' to apply related quirk. It allows usb glue layer driver apply these quirk. Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20240906-dwc-mp-v5-1-ea8ec6774e7b@nxp.com Signed-off-by: Greg Kroah-Hartman

xhci: support setting interrupt moderation IMOD for secondary interrupters

2024-09-05T14:39:23Z

Allow creators of seconday interrupters to specify the interrupt moderation interval value in nanoseconds when creating the interrupter. If not sure what value to use then use the xhci driver default xhci->imod_interval Suggested-by: Wesley Cheng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240905143300.1959279-13-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and freeing them.

2024-09-05T14:39:22Z

PCI xHC host should be stopped and xhci driver memory freed before putting host to PCI D3 state during PCI remove callback. Hosts with XHCI_SPURIOUS_WAKEUP quirk did this the wrong way around and set the host to D3 before calling usb_hcd_pci_remove(dev), which will access the host to stop it, and then free xhci. Fixes: f1f6d9a8b540 ("xhci: don't dereference a xhci member after removing xhci") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240905143300.1959279-12-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: adjust empty TD list handling in handle_tx_event()

2024-09-05T14:39:22Z

Introduce an initial check for an empty list prior to entering the while loop. Which enables, the implementation of distinct warnings to differentiate between scenarios where the list is initially empty and when it has been emptied during processing skipped isoc TDs. These adjustments not only simplifies the large while loop, but also facilitates future enhancements to the handle_tx_event() function. Signed-off-by: Niklas Neronin Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240905143300.1959279-11-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: remove 'retval' from xhci_pci_resume()

2024-09-05T14:39:22Z

Remove unnecessary local 'retval' argument. Signed-off-by: Niklas Neronin Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240905143300.1959279-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman