pm24.git/drivers/usb/serial, branch master

Merge tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-11-29T19:19:31Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.13-rc1. Overall, a pretty slow development cycle, the majority of the work going into the debugfs interface for the thunderbolt (i.e. USB4) code, to help with debugging the myrad ways that hardware vendors get their interfaces messed up. Other than that, here's the highlights: - thunderbolt changes and additions to debugfs interfaces - lots of device tree updates for new and old hardware - UVC configfs gadget updates and new apis for features - xhci driver updates and fixes - dwc3 driver updates and fixes - typec driver updates and fixes - lots of other small updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property dt-bindings: connector: Add time property for Sink BC12 detection completion usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb usb: dwc3: gadget: Cleanup SG handling usb: dwc3: gadget: Fix looping of queued SG entries usb: dwc3: gadget: Fix checking for number of TRBs left usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED Revert "usb: gadget: composite: fix OS descriptors w_value logic" usb: ehci-spear: fix call balance of sehci clk handling routines USB: make to_usb_device_driver() use container_of_const() USB: make to_usb_driver() use container_of_const() USB: properly lock dynamic id list when showing an id USB: make single lock for all usb dynamic id lists drivers/usb/storage: refactor min with min_t drivers/usb/serial: refactor min with min_t drivers/usb/musb: refactor min/max with min_t/max_t drivers/usb/mon: refactor min with min_t drivers/usb/misc: refactor min with min_t drivers/usb/host: refactor min/max with min_t/max_t ...

Merge tag 'usb-serial-6.13-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

2024-11-15T16:45:04Z

Johan writes: USB-serial updates for 6.13-rc1 Here are the USB-serial updates for 6.13-rc1, including: - improved support for quirky pl2303 hxd devices - make sure ftdi_sio TIOCGSERIAL returns consistent data Everything has been in linux-next with no reported issues. * tag 'usb-serial-6.13-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ftdi_sio: Fix atomicity violation in get_serial_info() USB: serial: pl2303: account for deficits of clones

USB: make single lock for all usb dynamic id lists

2024-11-14T16:05:20Z

There are a number of places where we accidentally pass in a constant structure to later cast it off to a dynamic one, and then attempt to grab a lock on it, which is not a good idea. To help resolve this, move the dynamic id lock out of the dynamic id structure for the driver and into one single lock for all USB dynamic ids. As this lock should never have any real contention (it's only every accessed when a device is added or removed, which is always serialized) there should not be any difference except for some memory savings. Note, this just converts the existing use of the dynamic id lock to the new static lock, there is one place that is accessing the dynamic id list without grabbing the lock, that will be fixed up in a follow-on change. Cc: Johan Hovold Cc: Herve Codina Cc: Rob Herring Cc: Alan Stern Cc: Grant Grundler Cc: Oliver Neukum Cc: Yajun Deng Cc: Douglas Anderson Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/2024111322-kindly-finalist-d247@gregkh Signed-off-by: Greg Kroah-Hartman

drivers/usb/serial: refactor min with min_t

2024-11-13T14:09:51Z

Ensure type safety by using min_t() instead of casted min(). Signed-off-by: Sabyrzhan Tasbolatov Link: https://lore.kernel.org/r/20241112155817.3512577-8-snovitoll@gmail.com Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: Fix atomicity violation in get_serial_info()

2024-11-07T16:21:10Z

Our static checker found a bug where set_serial_info() uses a mutex, but get_serial_info() does not. Fortunately, the impact of this is relatively minor. It doesn't cause a crash or any other serious issues. However, if a race condition occurs between set_serial_info() and get_serial_info(), there is a chance that the data returned by get_serial_info() will be inconsistent. Fixes: 3ae36bed3a93 ("fdti_sio: switch to ->[sg]et_serial()") Signed-off-by: Qiu-ji Chen Signed-off-by: Johan Hovold

USB: serial: pl2303: account for deficits of clones

2024-11-06T16:23:33Z

There are apparently incomplete clones of the HXD type chip in use. Those return -EPIPE on GET_LINE_REQUEST and BREAK_REQUEST. Avoid flooding the kernel log with those errors. Detect them during startup and then use the line_settings cache instead of GET_LINE_REQUEST. Signal missing break support via -ENOTTY. Signed-off-by: Jan Kiszka [ johan: fix macro prefix, drop oom error message ] Signed-off-by: Johan Hovold

USB: serial: qcserial: add support for Sierra Wireless EM86xx

2024-11-06T14:09:51Z

Add support for Sierra Wireless EM86xx with USB-id 0x1199:0x90e5 and 0x1199:0x90e4. 0x1199:0x90e5 T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90e5 Rev= 5.15 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Semtech EM8695 Mobile Broadband Adapter S: SerialNumber=004403161882339 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1199:0x90e4 T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90e4 Rev= 0.00 S: Manufacturer=Sierra Wireless, Incorporated S: SerialNumber=004403161882339 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jack Wu Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: io_edgeport: fix use after free in debug printk

2024-10-31T13:18:51Z

The "dev_dbg(&urb->dev->dev, ..." which happens after usb_free_urb(urb) is a use after free of the "urb" pointer. Store the "dev" pointer at the start of the function to avoid this issue. Fixes: 984f68683298 ("USB: serial: io_edgeport.c: remove dbg() usage") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Johan Hovold

USB: serial: option: add Quectel RG650V

2024-10-29T11:54:49Z

Add support for Quectel RG650V which is based on Qualcomm SDX65 chip. The composition is DIAG / NMEA / AT / AT / QMI. T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0122 Rev=05.15 S: Manufacturer=Quectel S: Product=RG650V-EU S: SerialNumber=xxxxxxx C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=9ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=9ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=9ms Signed-off-by: Benoît Monin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: option: add Fibocom FG132 0x0112 composition

2024-10-29T11:53:17Z

Add Fibocom FG132 0x0112 composition: T: Bus=03 Lev=02 Prnt=06 Port=01 Cnt=02 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0112 Rev= 5.15 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom Module S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Reinhard Speyerer Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold