pm24.git/drivers/usb, branch rust-6.10

Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-03-21T19:35:20Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of tiny changes and forward progress to support new hardware and better support for existing devices. Included in here are: - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more people start to use the hardware - default USB authentication mode Kconfig and documentation update to make it more obvious what is going on - USB typec updates and enhancements - usual dwc3 driver updates - usual xhci driver updates - function USB (i.e. gadget) driver updates and additions - new device ids for lots of drivers - loads of other small updates, full details in the shortlog All of these, including a "last minute regression fix" have been in linux-next with no reported issues" * tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits) usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic phy: tegra: xusb: Add API to retrieve the port number of phy USB: gadget: pxa27x_udc: Remove unused of_gpio.h usb: gadget/snps_udc_plat: Remove unused of_gpio.h usb: ohci-pxa27x: Remove unused of_gpio.h usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined usb: Clarify expected behavior of dev_bin_attrs_are_visible() xhci: Allow RPM on the USB controller (1022:43f7) by default usb: isp1760: remove SLAB_MEM_SPREAD flag usage usb: misc: onboard_hub: use pointer consistently in the probe function usb: gadget: fsl: Increase size of name buffer for endpoints usb: gadget: fsl: Add of device table to enable module autoloading usb: typec: tcpm: add support to set tcpc connector orientatition usb: typec: tcpci: add generic tcpci fallback compatible dt-bindings: usb: typec-tcpci: add tcpci fallback binding usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg} usb: core: Set connect_type of ports based on DT node dt-bindings: usb: Add downstream facing ports to realtek binding ...

usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer

2024-03-19T12:07:35Z

If reading the ACPI _PLD port location object fails, or the port doesn't have a _PLD ACPI object then the *pld pointer will remain uninitialized and oops when freed. The patch that caused this is currently in next, on its way to v6.9. So no need to add this to stable or current 6.8 kernel. Reported-by: Klara Modin Closes: https://lore.kernel.org/linux-usb/7e92369a-3197-4883-9988-3c93452704f5@gmail.com/ Tested-by: Klara Modin Fixes: f3ac348e6e04 ("usb: usb-acpi: Set port connect type of not connectable ports correctly") Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240308113425.1144689-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2024-03-13T18:07:37Z

Pull spi updates from Mark Brown: "This release sees some exciting changes from David Lechner which implements some optimisations that have been talked about for a long time which allows client drivers to pre-prepare SPI messages for repeated or low latency use. This lets us move work out of latency sensitive paths and avoid repeating work for frequently performed operations. As well as being useful in itself this will also be used in future to allow controllers to directly trigger SPI operations (eg, from interrupts). Otherwise this release has mostly been focused on cleanups, plus a couple of new devices: - Support for pre-optimising messages - A big set of updates from Uwe Kleine-König moving drivers to use APIs with more modern terminology for controllers - Major overhaul of the s3c64xx driver - Support for Google GS101 and Samsung Exynos850" * tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits) spi: Introduce SPI_INVALID_CS and is_valid_cs() spi: Fix types of the last chip select storage variables spi: Consistently use BIT for cs_index_mask spi: Exctract spi_dev_check_cs() helper spi: Exctract spi_set_all_cs_unused() helper spi: s3c64xx: switch exynos850 to new port config data spi: s3c64xx: switch gs101 to new port config data spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id spi: s3c64xx: get rid of the OF alias ID dependency spi: s3c64xx: introduce s3c64xx_spi_set_port_id() spi: s3c64xx: let the SPI core determine the bus number spi: s3c64xx: allow FIFO depth to be determined from the compatible spi: s3c64xx: retrieve the FIFO depth from the device tree spi: s3c64xx: determine the fifo depth only once spi: s3c64xx: allow full FIFO masks spi: s3c64xx: define a magic value spi: dt-bindings: introduce FIFO depth properties spi: axi-spi-engine: use struct_size() macro spi: axi-spi-engine: use __counted_by() attribute spi: axi-spi-engine: remove p from struct spi_engine_message_state ...

mm, slab: remove last vestiges of SLAB_MEM_SPREAD

2024-03-13T03:32:19Z

Yes, yes, I know the slab people were planning on going slow and letting every subsystem fight this thing on their own. But let's just rip off the band-aid and get it over and done with. I don't want to see a number of unnecessary pull requests just to get rid of a flag that no longer has any meaning. This was mainly done with a couple of 'sed' scripts and then some manual cleanup of the end result. Link: https://lore.kernel.org/all/CAHk-=wji0u+OOtmAOD-5JV3SXcRJF___k_+8XNKmak0yd5vW1Q@mail.gmail.com/ Signed-off-by: Linus Torvalds

Merge tag 'wq-for-6.9-bh-conversions' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq

2024-03-11T20:05:19Z

Pull workqueue BH conversions from Tejun Heo: "This contains two patches that convert tasklet users to BH workqueues: backtracetest and usb hcd. DM conversions are being routed through the respective subsystem tree. Hopefully, the next cycle will see a lot more conversions" * tag 'wq-for-6.9-bh-conversions' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: usb: core: hcd: Convert from tasklet to BH workqueue backtracetest: Convert from tasklet to BH workqueue

Merge tag 'usb-serial-6.9-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

2024-03-08T08:53:27Z

Johan writes: USB-serial updates for 6.9-rc1 Here are the USB-serial updates for 6.9-rc1, including: - new device ids - removal of some redundant assignments All have been in linux-next with no reported issues. * tag 'usb-serial-6.9-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cp210x: add pid/vid for TDK NC0110013M and MM0110113M USB: serial: keyspan: remove redundant assignment to pointer data USB: serial: ftdi_sio: remove redundant assignment to variable cflag USB: serial: oti6858: remove redundant assignment to variable divisor USB: serial: option: add MeiG Smart SLM320 product USB: serial: cp210x: add ID for MGP Instruments PDS100 USB: serial: add device ID for VeriFone adapter USB: serial: ftdi_sio: add support for GMC Z216C Adapter IR-USB

usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin

2024-03-07T20:59:30Z

Currently the variable irqflags is being set but is not being used, it appears it should be used in the call to net2272_probe_fin rather than IRQF_TRIGGER_LOW being used. Kudos to Uwe Kleine-König for suggesting the fix. Cleans up clang scan build warning: drivers/usb/gadget/udc/net2272.c:2610:15: warning: variable 'irqflags' set but not used [-Wunused-but-set-variable] Fixes: ceb80363b2ec ("USB: net2272: driver for PLX NET2272 USB device controller") Signed-off-by: Colin Ian King Acked-by: Alan Stern Link: https://lore.kernel.org/r/20240307181734.2034407-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic

2024-03-07T20:58:33Z

This commit resolves an issue in the tegra-xudc USB gadget driver that incorrectly fetched USB3 PHY instances. The problem stemmed from the assumption of a one-to-one correspondence between USB2 and USB3 PHY names and their association with physical USB ports in the device tree. Previously, the driver associated USB3 PHY names directly with the USB3 instance number, leading to mismatches when mapping the physical USB ports. For instance, if using USB3-1 PHY, the driver expect the corresponding PHY name as 'usb3-1'. However, the physical USB ports in the device tree were designated as USB2-0 and USB3-0 as we only have one device controller, causing a misalignment. This commit rectifies the issue by adjusting the PHY naming logic. Now, the driver correctly correlates the USB2 and USB3 PHY instances, allowing the USB2-0 and USB3-1 PHYs to form a physical USB port pair while accurately reflecting their configuration in the device tree by naming them USB2-0 and USB3-0, respectively. The change ensures that the PHY and PHY names align appropriately, resolving the mismatch between physical USB ports and their associated names in the device tree. Fixes: b4e19931c98a ("usb: gadget: tegra-xudc: Support multiple device modes") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang Reviewed-by: Jon Hunter Tested-by: Jon Hunter Link: https://lore.kernel.org/r/20240307030328.1487748-3-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman

USB: gadget: pxa27x_udc: Remove unused of_gpio.h

2024-03-07T20:58:30Z

of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240307113936.3642469-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: gadget/snps_udc_plat: Remove unused of_gpio.h

2024-03-07T20:58:27Z

of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240307112509.3627937-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman